• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.556-560
• /
• 1996

In order to examine thd accuracy of intersection counting method, the fiber orientation distribution of simulation figure platted by PC is measured using image processing. The fiber orientation distribution obtained by an image processing method is compared with those by the intersection counting method. The result shows that the errors of the intersection counting method are large because its measurement is made by the cross point of the scanning line and the fiber.

• 음성과학
• /
• 제8권4호
• /
• pp.1-15
• /
• 2001

This paper describes the effect of new recognition unit, a unit based on semisyllable, and its post processing method. A recognition unit based on semi-syllable expresses Korean connected digit's coarticulation effect. An existing method using semi-syllable limits next models, derived from current recognized models, to make complete connected digit sequence. However, this paper uses a new method to make complete connected digit sequence. The new post-processing method recognizes isolated digit words which include digits sequence from the digit combinations being able to occur from current recognized semi-syllable sequence. This method gives an improved accuracy rate than that of existing method. This new post processing provides two advantages. 1) It corrects current mis-recognized semi-syllable unit. 2) When people say each digit, they say it without regard to saying duration.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.294-303
• /
• 2021

Various types of sensors are used at industrial sites to measure vibration. With the increase in the diversity of vibration measurement methods, vibration monitoring methods using camera equipment have recently been introduced. However, owing to the physical limitations of the hardware, the measurement resolution is lower than that of conventional sensors, and real-time processing is difficult because of extensive image processing. As a result, most such methods in practice only monitor status trends. To address these disadvantages, a high-resolution vibration measurement method using image analysis of the edge region of the structure has been reported. While this method exhibits higher resolution than the existing vibration measurement technique using a camera, it requires significant amount of computation. In this study, a method is proposed for rapidly processing considerable amount of image data acquired from vision equipment, and measuring the vibration of structures with high resolution. The method is then verified through experiments. It was shown that the proposed method can fast measure vibrations of structures remotely.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권2호
• /
• pp.85-92
• /
• 2017

This paper presents a dehazing method based on a fuzzy membership function and variational method. The proposed algorithm consists of three steps: i) estimate transmission through a pixel-based operation using a fuzzy membership function, ii) refine the transmission using an L1-norm-based regularization method, and iii) obtain the result of haze removal based on a hazy image formation model using the refined transmission. In order to prevent color distortion of the sky region seen in conventional methods, we use a trapezoid-type fuzzy membership function. The proposed method acquires high-quality images without halo artifacts and loss of color contrast.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권1호
• /
• pp.56-62
• /
• 2004

This research attempts to suggest a detecting method for cutting position of an object using the neural network, which is one of intellectual methods, and the digital image processing method. The extraction method of object information using the image data obtained from the CCD camera as a replacement of traditional analog sensor thanks to the development of digital image processing. Accordingly, this research determines the threshold value in binary-coding of an input image with the help of image processing method and the neural network for the real-time gray-leveled input image in substitution for lighting; as a result, a specific position is detected from the processed binary-coded image and an actual system designed is suggested as an example.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.237-239
• /
• 2009

The purpose of this research is to propose a system to detect a strip defect on a iron plate using an image processing, one way of finding defects on an iron plate. An existing way of image processing is using a light source which release a light energy in a certain frequency and a light absorbing display which responds to the light source. This research attempts to detect defects by using the image processing which handles an illumination, without depending on characteristics of light frequency. One of the advantages of this method is that it makes up for the weakness of the existing method which was too difficult for users to notice a defect. Also this method makes it possible to realize a real-time monitoring on a plate of iron.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.751-754
• /
• 2009

This paper deals with the Cell-based distributed processing for generating free viewpoint images by merging multiple differently focused images. We previously proposed the method of generating free viewpoint images without any depth estimation. However, it is not so easy to realize real-time image reconstruction based on our previous method. In this paper, we discuss the method to reduce the processing time by dimension reduction for image filtering and Cell-based distributed processing. Especially, the method of high-speed image reconstruction by the Cell processor on SONY PLAYSTATION3(PS3) is described in detail. We show some experimental results by using real images and we discuss the possibility of real-time free viewpoint image reconstruction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.134-140
• /
• 2001

Parallel processing has the potential to be cost effectively used on computationally intense power system problems. But this technology is not still available is not only parallel computer but also parallel processing scheme. Testing these algorithms to ensure accuracy, and evaluation of their performance is also an issue. Although a significant amount of parallel algorithms of power system problem have been developed in last decade, actual testing on processor architectures lies in the beginning stages. This paper presents the parallel processing algorithm to supply the base being able to treat power flow by newton's method by the distributed memory type parallel computer. This method is to assign and to compute teared blocks of sparse matrix at each parallel processors. The testing to insure accuracy of developed method have been done on serial computer by trying to simulate a parallel environment.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.11-18
• /
• 2002

We proposed a new experimental method which is required to easily observe the growth behavior of fatigue cracks. In the proposed method, the image data of cracks were stored into the computer while the cyclic loading was interrupted. After testing, crack length was determined using an image processing software which was developed by authors. By comparing the data measured by the image processing system with those by the manual measurement with a microscope, the effectiveness of the image processing system was established. If the proposed method is used to monitor and observe the crack growth behavior automatically, the time and efforts for fatigue test could be dramatically reduced.

• 한국항만학회지
• /
• 제14권2호
• /
• pp.133-142
• /
• 2000

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system. The result of the paper presents that if data transmission area such as 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.