• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.179-184
• /
• 2013

An accident from machine work is often fatal to the worker. This accident is mostly preventable through perfect process jig. In case of this machine work, however, the disaster frequently occurred because of the design which is not considered the beginning of product design, post-process and mass process of production. As for sand casting method, this has the merits of the production; the product is easily produced by manual labor. On the other hand, this method has the demerits of a bigger dimensional error contrary to other mass process of production. When the sand casting product is in machine work, there are various problems such as unsafe fix and excessive cutting, product desorption and rapid life depreciation of equipment and tools. Considering the characteristics of sand casting method, it is accepted as difficulty to improve the problems. In this study, it suggests shell mold method for mold instead of the machine work after the sand casting of the circle shape container product. And the surface accomplishes the following average of surface roughness Ra$9.94{\mu}m$ of machine work with the casting of flask mold by shell mold method. In accordance with the simplification of processing process and reducing the average thickness variation by mass production of product with detailed appearance, it has a good influence on safety accident prevention caused by production and damaged product. It is confirmed that making higher degree of size precision of all machine work product is possible to increase the safety and productivity, reduce the processing process and improve environment.

• Advances in Traditional Medicine
• /
• 제10권4호
• /
• pp.231-238
• /
• 2010

Sterile Products may be broadly classified into two main categories, according to the manner in which they are produced: those which are sterilized after the product has been filled and sealed in the final container(s) ("terminally sterilized" products) and those where the sterilization stage (or stages) takes place is it before or after the bulk product filled in to final container. In this latter instance, all subsequent processing (typically, the filling and sealing operations) must be conducted aseptically in order to prevent recontamination of the sterilized product. The two most common pharmaceutical applications of aseptic processing methods are (a) the filling of liquid products following sterilization by filtration and (b) the filling of previously sterilized bulk powder products. An aseptic processing operation should be tested using a microbiological growth medium (media fill) during lyophilized injection formulation, filling, loading, lyophilisation, stoppering, and unloading activities.

• 한국식생활문화학회지
• /
• 제21권6호
• /
• pp.695-701
• /
• 2006

This study is based on the utilization of pine mushroom for processing products by development of pine mushroom Jung-Gwa. The results were summarized as follows: Pine mushroom Jung-Gwa were prepared with four different amounts (20, 30, 40, 50%) of honey. Pine mushroom Jung-Gwa color value was the highest by 20% soaking honey-water product and 40% soaking honey-water product was the lowest. Strength and hardness of 20% soaking honey-water product was the highest. Appearance to product of 50% soaking honey-water was the highest preference by all age of except 20's. The honey content of more and more external appearance preference was became higher. Product of 40% soaking honey-water was best by flavor of pine mushroom Jung-Gwa. A sugary tastes comparison 50% soaking honey water to 40% soaking honey water was not distinction. The texture was appeared a statistically significant difference by products of 20%, 30% soaking honey-water. Product of 20% soaking honey-water was favorite in 20's and product of 30% soaking honey-water was favorite in 30's. In overall preference test for pine mushroom Jung-Gwa of 40% soaking honey water was preferred by all age. Oligosaccharide helped geriatric diseases and cheaper. Thus this study used oligosaccharide but the result was not a statistically significant difference of pine mushroom Jung-Gwa products quality by comparison honey-water to oligosaccharide. Therefore oligosaccharide utilization products was thought worth a lot more by processing price and functional.

• 한국결정성장학회지
• /
• 제27권4호
• /
• pp.212-219
• /
• 2017

앞으로 다가올 감성이 지배하는 '하이터치(High-Touch)'의 시대에 걸맞은 사람이 되기 위해서는 6가지 능력이 중시되는데 디자인, 스토리, 조화, 공감, 놀이, 의미가 있으며 이 중에서 디자인과의 조화를 가장 중요한 능력으로 꼽았다. 모든 비즈니스의 기본요소라고 볼 수 있는 디자인은 논리적이고 객관화된 정보와 지식을 바탕으로 만들어진 현대의 디자인 관으로는 직관적이고 감성적인 앞으로의 시대 흐름에 발맞추기 힘들 것이다. 본 논문은 1차적 관점의 디자인 소재 중요성과 함께 심도 있는 Color, Material, Finishing(CMF) 이해와 차별화 전략을 세워 소비자가 느끼는 감성인지요소와 제품의 표면처리디자인 적용을 통한 대품질, 매력품질, 감동품질을 만족시키는 감성 표면처리디자인의 체계화 및 표준화를 제시하였다. 제품에 적용되어지는 부품 유형별 CMF 차별화 전략 방향 설정에 따라 구현가능성 차별성 신표면처리특성 효율성을 고려하여 시각적 표면처리 샘플로 구현하였다. 이를 통해 향후 실질적으로 제품 개발 시 IT 및 전자제품 분야와 그 이상의 분야에서 디자이너, CMF 디자이너, 표면처리전문가, 엔지니어 등 실무 환경에서의 대상제품, 부품유형, 적용소재, 적용표면처리, 표면컬러, 표면질감, 구현하고자하는 느낌 등 통합적 요소들을 이해하고 공유할 수 있는 실무자 소통연계 툴 및 감성 표면처리디자인 전략적 접근 프레임워크로서의 활용이 예상되는 바이다.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.32-38
• /
• 2021

Plate-shaped works are one of the materials that can be applied to the entire industry due to their various shapes and sizes. Plate-shaped parts workpieces are thin and wide, and when processing is completed, they are often bent or deformed in various directions, making it difficult to produce normal products. In particular, this study intends to study the processing deformation and distortion of plate-shaped parts fastened to the jig during milling processing. In this study, a method for preventing deformation occurring in plate-shaped parts was derived through jig element change and CAE analysis, and this was applied to actual processing to produce products with stable dimensions. Through a finite element analysis experiment, it was found that installing two supports on the back of the plate-shaped part results in minimal deformation and the optimal distance between the two supports is 150 mm. Through this experiment, when processing a thin plate product, a support was installed in a direction opposite to the cutting force applied to the thin plate to prevent deformation of the product, thereby improving defects.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.83-87
• /
• 2000

The die for cold forging gets a ver high axial load and radial pressure during processing and hence deforms considerably in the radial direction. This radial deformation of die becomes a important factor influencing the dimensional accuracy of a product. In order to obtain a product with highly accurate dimension therefore it is essential to acquire some information on elastic deformation of the die and the product. The study has been performed for the relation of the deformation between a die and a product in backward extrusion. The strain of the die has been given by the simple experiment using the strain gauges attached to the outer surface of the die. Also the history of the deformation of the die and the product has been given by the experiment and Lames' formula. The results has been compared with the previous another method. The study has given useful results for the deformation history of the die and the product through the experiment and Lame's formula in backward extrusion which can be applied in the die design for the product with accurate dimension

• 한국정보처리학회논문지
• /
• 제6권10호
• /
• pp.2680-2692
• /
• 1999

Software quality is classified by quality of process and product. In experience of Quality Management, it is known that quality level of product as it depends on goodness and badness of process and organization. As a result, improvement of software process has been important subject. According as this trends, ISO 12207 is publicated as standard of software life cycle process by ISO. For UML based object oriented development process, it is necessary that we should research detailed definition of activity and task of ISO 12207 process which is added, deleted or tailored in according to organization and project characteristics. In this thesis, by according with ISO 12207 software life cycle process, UML based object oriented development process is proposed. This process is composed of 7 steps and 19 activities including development phase, activity and product to improve quality of reliability. Usefulness of object oriented process for improvement of software quality is proved at three ways, which are comparative analysis of process characteristics, SPICE process evaluation and SPICE rick analysis.

• 융합신호처리학회논문지
• /
• 제12권4호
• /
• pp.322-332
• /
• 2011

본 논문에서는 한일공동VLBI상관기(Korea-Japan Joint VLBI Correlator, KJJVC)의 핵심 구성시스템인 VLBI상관서브 시스템(VLBI Correlation Subsystem, VCS) 본제품의 1차 성능시험에 대해 기술한다. VCS 본제품의 1차 성능시험의 주요 목적은 현장에 설치하기 전에 제작사에서 다양한 시험항목을 대상으로 시험을 수행하여 문제점을 확인 후 전체 시스템의 완성도를 높이는 것이다. 이번 성능시험에서는 VCS 시작품에서 발견된 FFT 재양자화의 유효비트 부족으로 인한 오버폴로어 문제점을 포함한 기능적인 시험을 수행하였다. 이번 VCS 본제품의 공장시험을 통하여 2008년 VCS 시작품의 성능시험에서 발견한 FFT 의 재양자화 문제점이 완전히 해결되었으며 VCS 본제품에 지연추적, 지연보상, 주파수 묶음 등의 중요 기능도 추가되었다. 그리고 실제 관측 데이터(광대역/협대역)를 이용한 상관처리 시험에서도 예측되는 상관결과가 출력되는 것을 확인하였다.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.31-35
• /
• 2019

For manufacturing upper housing product of mechanical control valve, the progressive drawing process was conducted experimental. Then, the center of the product was cut to measure the thickness of the product. As a result, the following conclusions were obtained. By means of a stand-alone pad provided with sufficient pressure, it is possible to prevent the occurrence of wrinkles in the die pad product of the drawing process. As a result of the experiment, it was considered that the flange bottom of the product and the lower edge of the product are made thick in thickness, the top edge and the top surface are thin. It is considered that this is due to the size and roughness of the entrance edge radius of the die in the drawing process, and the inflow of the material by the die pad.

• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1878-1888
• /
• 1990

In this paper, the input-output interconnection method of the multi-valued signal processing circuit using perfect Shuffle technique and Kronecker product is discussed. Using this method, the design method of circuit of the multi-valued Reed-Muller expansions(MRME) to be used the multi-valued signal processing on finite field GF(p**m) is presented. The proposed input-output interconnection method is shown that the matrix transform is efficient and that the module structure is easy. The circuit design of MRME on FG(p**m) is realized following as` 1) contructing the baisc gates on GF(3) by CMOS T gate, 2) designing the basic cells to be implemented the transform and inverse transform matrix of MRME using these basic gates, 3) interconnecting these cells by the input-output interconnecting method of the multivalued signal processing circuits. Also, the circuit design of the multi-valued signal processing function on GF(3\ulcorner similar to Winograd algorithm of 3x3 array of DFT (discrete fourier transform) is realized by interconnection of Perfect Shuffle technique and Kronecker product. The presented multi-valued signal processing circuits that are simple and regular for wire routing and posses the properties of concurrency and modularity are suitable for VLSI.