• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.222-223
• /
• 2017

In the automotive industry, such as scrap metal and plastic scrap process is being recycled. Although the glass beads are used as road paving or other additives and processing crushing, recycling is known that there are limits. The utilization of waste glass was evaluated as a concrete admixture by using powder characteristics and chemical composition of the glass. As a result of using waste-glass powder as an admixture, it is difficult to expect the pozzolanic effect, but it is found that it can increase the fluidity of concrete and ensure the durability performance in the appropriate amount range.

• 소성∙가공
• /
• 제4권3호
• /
• pp.245-256
• /
• 1995

SMC(Sheet Molding Compound), a thermoset composite material which consists of unsaturated polyester resin, fiberglass strands, fillers, and various chemical additives for curing agent, has been widely used in fabrication of structural components. The mechanical properties of molded SMS parts are strongly dependent on material flow results during compression molding process, while such flow in molds is affected by material characteristics. For numerical simulation of SMC molding process, estimation of material property of SMC must be accomplished. In this study, flow resistance of SMC was estimated through a simple compression test using a lubricant with grease oil under the constant strain rate condition at various temperatures and the result was compared with other material data available in the literature. The accuracy of the experimentally determined flow resistance was tested by finite element analyses of compression molding of SMC. Simulation results were compared with experimental results under the plane strain condition.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.97.1-97.1
• /
• 2012

Porous ceramics are widely used for applications such as catalysis supports, gas distributors and filters such as DPF. For these purpose, it is important to have proper porosity controlling pore structure while maintaining mechanical and thermal properties. In this work, we have prepared the porous ceramic structures made of reaction bonded silicon nitride with hierarchical pore structures. Uni-directionally aligned pore channels, which are mostly filled with ${\beta}$-Si3N4 whiskers, were achieved by an ice-templating method. The structures of the pore channels and the walls are controllable by the processing conditions, such as solid concentration, freezing rate of the slurry, and additives. We have investigated and characterized the influences of the conditions on the microstructures and the properties, such as porosity, pore size distribution, lamellar thickness, wavelength, and orientations. The compressive strength test and flow test was performed to determine the structural integrity and air permeability.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.841-851
• /
• 1996

The purpose of this study is to investigate the backstaining generated during cellulase treatment for indigo-dyed denim. The results were as follows. 1. High generating conditions of the backstaining were as same as best conditions for cellulose activity (temperature at 6$0^{\circ}C$, pH at about 4.5~5.5, treatment time at 40 min. and enzyme concentration at 2g/l). And also, liquor ratio, sample weight and repeated-use cycle of liquor had influenced on the backstaining. 2. The backstaining was decreased about 30~40% when various additives, that is, surfactant, anti-backstaining agent (C.M.C) and softners were added. 3. A application of image processing on the backstaining evaluation was more effective than method by reflectance, particullarly in out of level fabrics. In image analysis, the backstainings were measured by histogram between 256 gray levels.

• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.16-20
• /
• 2005

Additions of ground garlic, chili and ginseng powder did not affect the breaking force and strain of directly heated gel of Alaska pollack surimi. In comparison, these additives reduced the setting effect achieved by incubation of the salted surimi at $25^{\circ}C$, and resulted in a decreased breaking force and strain for the two step heated gel. Garlic almost completely inhibited the myosin cross-linking reaction, an important reaction for improving the gel properties occurring in the setting process. However, chili and ginseng powder minimally inhibited the cross-linking reaction. Thus, this study proposes that the mechanism for the suppression of the setting effect by chili and ginseng is different from that of garlic.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.292-296
• /
• 1998

In wet powder processing of alumina, a number of organic molecules such as dispersant and binder are used to produce the flow behavior and properties requisite for shape forming. In this study, interparticle forces of alumina particles suspended in aqueous media were controlled by suspension pH, poly (methacrylic acid) (PMAA, used as dispersant) and poly (vinyl alcohol) (PVA, used as binder). The combined adsorption isotherms of the dispersant and binder additives on alumina were determined by total organic carbon analyzer, while the adsorption of dispersant was differentiated from binder in the mixed additive system by ultraviolet spectroscopy. The electrokinetic behavior of alumina suspensions were then correlated with the adsorption characteristics of dispersant and binder onto alumina particles. It was found that the isoelectric ($pH_{iep}$) of alumina shifted from pH 8.9${\pm}$0.1 to acidic pH as PMAA concentration increased, while PVA adsorption did not affect the $pH_{iep}$ but caused a decrease in the near surface potential.

• 대한화학회지
• /
• 제60권3호
• /
• pp.177-180
• /
• 2016

The surface properties of carbon microfibers (CMFs) are modified by chemical deposition of carbon nanofibers via the so-called ethylene processing. CMFs and the modified CMFs (MCMFs) are investigated as reinforcement additives to fabricate polyethylene (PE) composites with enhanced mechanical characteristics. The mechanical properties of the PE-MCMF composites are found to be better and favorable for applications under harsh climatic conditions such as those in Siberia. Improved adhesive interaction between MCMFs and PE is responsible for these enhanced mechanical properties.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.199-204
• /
• 2010

The objective of this paper is to present new binder systems that can be applied in composite rocket propellants, to improve properties of these propellants not only for better performance, but also to reduce waste and pollution. These novel systems are based on the thermoplastic elastomer (TPE) binders, which consists of copolymers with the addition of a plasticizer, and additives. The effect of the novel TPE binder systems on the burning rate and mechanical properties of AP based propellants was studied. The results show that propellants based on the novel TPE binders have a better energy performance than today's workhorse hydroxyl terminated polybutadine/ammonium perchlorate propellant, exhibit a similar range of burning rate, possess appropriate mechanical properties, and exhibit good processing and aging characteristics at low cost.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.643-644
• /
• 2005

New methods of nano-sized material and composite coating preparations have been considered on the base of mathematical model of abrasion-reaction interaction of milling and grinding bodies in planetary centrifugal mill. The essence of the method is the abrasive and oxidative wear of the milling bodies and amorphous (better inert) additives. Interactions between them has been supplied the necessary impulse of pressure and temperature on the impact-frictional contacts and promoted chemical processes. The offered method can find application for such processing as sintering and geological minerals opening.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.383-389
• /
• 2022

Natural(outdoor) and accelerated(artificial) weathering tests were performed to investigate their influence on polycarbonate. The polycarbonate materials were prepared of various formulations divided into three batches, with existing, development materials1, development materials2, containing mixture of UV additives. Weathering tests were carried out as outdoor weathering(Seosan, South Korea) and accelerated weathering(xenon-arc), and the results analysis were evaluated based on yellow-index(YI), scanning electron microscope(SEM/EDS), energy dispersive x-ray spectroscopy(XRD), and gel permeation chromatography(GPC). Among the three materials, processing method development materials1 with UV stabilizer was excellent in weathering. This study can provide basic data for standardization of development and performance evaluation on livestock barn roof.