• Title/Summary/Keyword: Processing additives

Search Result 226, Processing Time 0.023 seconds

Microwave Dielectric Properties of (Zr, Sn)$TiO_4$ ceramics according to Sn and Additives ((Zr, Sn)$TiO_4$ 세라믹스의 Sn 및 첨가제 양에 따른 고주파 유전 특성)

  • Yun, Jung-Rag;Kim, Kyung-Yong
    • Proceedings of the KIEE Conference
    • /
    • 1993.11a
    • /
    • pp.181-184
    • /
    • 1993
  • Microwave characteristics of the system (Zr, Sn)$TiO_4$, ceramics within composition range X between 0.2 and 0.35 were investigated at 8GHz. For the improvement properties of (Zr, Sn)$TiO_4$, system, $Ta_2O_5$ and $WO_3$ addition in the range of 0.5 to 2.0wt% were investigated.

  • PDF

Effects of additives on the fermentation quality, in vitro digestibility and aerobic stability of mulberry (Morus alba L.) leaves silage

  • Dong, Zhihao;Wang, Siran;Zhao, Jie;Li, Junfeng;Shao, Tao
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.8
    • /
    • pp.1292-1300
    • /
    • 2020
  • Objective: To explore feed resources capable of replacing regular poor-quality fodder, this study was conducted to evaluate the effects of additives on the fermentation quality, in vitro digestibility and aerobic stability of mulberry leaves silage. Methods: The mulberry leaves were ensiled either untreated (control) or treated with 1×106 cfu/g fresh matter Lactobacillus plantarum (L), 1% glucose (G), 3% molasses (M), a combination of 1% glucose and Lactobacillus plantarum (L+G), and a combination of 3% molasses and Lactobacillus plantarum (L+M). The fermentation quality and chemical composition were analyzed after 7, 14, 30, and 60 d, respectively. The 60-d silages were subjected to an aerobic stability test and fermented with buffered rumen fluid to measure the digestibility. Results: Inoculating lactic acid bacteria (LAB) resulted in more rapid increase in lactic acid concentrations and decline in pH of mulberry leaves silage as compared control. Higher acetic acid and lower ethanol and ammonia nitrogen concentrations (p<0.05) were observed in the LAB-inoculated silages as opposed to control during ensiling. The LAB-inoculated silages contained lower water-soluble carbohydrates compared with control during the first 14 d of ensiling, and lower neutral detergent fibre (p<0.05) concentrations as compared with non-LAB inoculated silages. Adding molasses alone increased (p<0.05) the digestibility of dry matter (DM). The aerobic stability of mulberry leaves silage was increased by LAB inoculation, whereas decreased by adding glucose or molasses. Conclusion: The LAB inoculation improved fermentation quality and aerobic stability of mulberry leaves silage, while adding glucose or molasses failed to affect the fermentation and impaired the aerobic stability. Inoculating LAB alone is recommended for mulberry leaves especially when ensiled at a relatively high DM.

Effects of Additives on Dielectric Properties and Microstructure of MLCC X7R Composition (첨가물의 형태가 MLCC X7R 조성의 유전 특성 및 미세구조에 미치는 영향)

  • Moon, Hwan;Kim, Min-Kee;Jeon, Hyun-Pyo;Ahn, Jae-Pyoung;Yoon, Jung-Rag;Chung, Tae-Serk
    • Journal of the Korean Ceramic Society
    • /
    • v.40 no.7
    • /
    • pp.644-651
    • /
    • 2003
  • Effects of additives on electrical properties and microstructure of MLCC X7R dielectrics have been investigated. The additives of glass frit or oxide form were added in the same main composition by the different powder processing conditions. As a result of the dielectric property and microstructure analysis, the composition having the glass layer with dopant concentration gradient showed the excellent dielectric properties. The MLCCs were fabricated with the excellent composition and all dielectric properties satisfied the X7R requirements.

Effects of $Mn_2O_3, Y_2O_3$ Additives and Valence State of Mn ion in $Sr(Zr, Ti)O_3$ Microwave Dielectrics ($Sr(Zr, Ti)O_3$ 마이크로파 유전체에 첨가된 $Mn_2O_3, Y_2O_3$ 의 영향과 Mn의 산화상태)

  • 정하균;박도순;박윤창
    • Journal of the Korean Ceramic Society
    • /
    • v.34 no.6
    • /
    • pp.583-590
    • /
    • 1997
  • The effects of Mn2O3 and Y2O3 additives on the microstructure and dielectric properties of Sr(Zr, Ti)O3 have been investigated. Powders with Sr(Zr1-xTix)O3(0$\leq$x$\leq$0.1) composition were prepared by the conventional solid state processing from commercial TiO2 and precipitation-processed ZrO2. The powders containing sintering additives of Mn2O3 and Y2O3 were compacted and then sintered at 1,55$0^{\circ}C$ for 4 h to get>97% relative density. Mn2O3 suppressed the grain growth and Y2O3 enhanced the density of sintered body. The oxidation state of Mn ions were determined by a chemical wet method and EPR spectroscopy. Mn ions were present as Mn2+ and Mn4+ in SrZrO3, while as Mn3+ and Mn4+ in Ti-substituted Sr(Zr, Ti)O3. With the substitution of Ti, the lattice parameters of SrZrO3 decreased and its dielectric constant increased with remarkable decrease in Q value. The dielectric constant of Sr(Zr, Ti)O3 was in the range of 30 to 40, Q values 1,200~5,400 at 6 GHz and temperature coefficient of resonant frequency -67~100 ppm/K.

  • PDF

A Study of the Additional Toxicity of Mixed Food Additives to Rat (혼합(混合)된 식품첨가물(食品添加物)이 흰쥐의 생리(生理)에 미치는 상승적(相乘的) 독성(毒性) 효과(效果)에 관(關)한 연구(硏究))

  • Chung, Ho-Kwon
    • Applied Biological Chemistry
    • /
    • v.18 no.2
    • /
    • pp.71-97
    • /
    • 1975
  • To improve the food qualities in Korea, two hundred and fourtynine kinds of food additives have been allowed in food processing, of which one hundred and nineteen kinds could be used under the limitted conditions. Hence, in practical uses in food processing, many kinds of them are mixed at random within the permitted amounts for their special purposes. For last several years, many kinds of the food additives were prohibited because they have been proved to be toxic even with the single dose. Until recently a few studies on the toxicity in the mixture of food additives were reported, however, they were shown to be no severe additional effect on the animal. This study was performed to see if any elevation of chronic or subacute toxicity of food additives occur especially when they are mixed with each other, using three kinds of food additives (DHA, AF-2, BHT) most widely used as food preservatives, antiseptics and antioxidants. One hundred and fifty young male rats were taken and divided into ten feeding groups, one first control group (food additives blank), three second control groups (DHA 0.1%, AF-2 0.1%, BHT 0.5%), three mixture groups of low level (mixture of each 60% of two second control level) and three mixture groups of high level (mixture of each 90% of two second control level). As the methods of biological and clinical tests, the change of body weight (growth rate), daily intake of diets, organ to body weight ratio, histopathological findings of organs, hematological observation, liver and kidney function tests were checked three times during the periods of 24 weeks. The following results were obtained. 1. The low level group of DHA, AF-2 mixture and DHA, BHT mixture revealed a little retardation in growth rate than the first control group, however, they were similar to the second controls, while all the mixture groups of high level showed a more remarkable retardation than the first and second controls. 2. Average daily intake of the diets was the same in each group, showing a similar decreasing tendency (70-100g/kg of body weight) in accordance with the growth rate. It was observed that there are no differences in the taste and appetite in each group of rats. 3. Abnormal enlargements of kidney and lung were not seen in all the mixture groups compared with the controls, while a slight hepatomegaly was observed in all mixture groups of low level as in the second controls. Significant differences (almost 1% level) were observed between the high level groups and the first control group. 4. Histopathological effects of the food additives on lung, kidney and liver tissues were found in all mixture group of high level. The less frequencies of the same effects were also seen in the low level groups. 5. The esterified cholesterol to total cholesterol ratio in the mixture groups of high level showed a little lower values, and the activities of serum glutamate oxaloacetate transaminase and alkaline phosphatase decreased almost with significance of 5% level compared with the first control group. The serum A/G ratio in the mixture groups also decreased. The results demonstrated that the liver function was decreased in the mixture groups compared with the controls. 6. In all groups throughout the test period, kidney functions (concentration of protein and creatinine excreated per hour in urine and renal filtration rate) were shown almost as normal as the first control. 7. Average values of hematocrit, erythrocytes and leucocytes in the mixture groups were in the normal ranges as in the controls, which denotes that the production of blood cells in bone marrow were also normal in all groups. With the above results, it is concluded that when the food additives (DHA, AF-2, BHT) were given together to the rats in several combinations even in less amount, they showed more toxic signs than the single doses.

  • PDF

Effect of the Processing Parameters on the Densification and Strength of 2D SiC Fiber-SiC Matrix Composites Fabricated by Slurry Infiltration and Stacking Process

  • Lim, Kwang-Young;Jang, Doo-Hee;Kim, Young-Wook;Park, Ji-Yeon;Park, Dong-Soo
    • Journal of the Korean Ceramic Society
    • /
    • v.44 no.7
    • /
    • pp.349-353
    • /
    • 2007
  • 2D SiC fiber-SiC (SiC/SiC) composites were fabricated via slurry infiltration and a stacking process. The effects of the additive composition and content in SiC slurries and the effect of the sintering time on the sintered density and strength of SiC/SiC composites were investigated. A slurry containing $Al_2O_3-Y_2O_3-MgO$ (AYM) additives led to a higher strength compared to a slurry containing $Al_2O_3-Y_2O_3-CaO$ (AYC) additives. The sintered density increased as the sintering time increased and showed a maximum (>98%) at 4 h. In contrast, the flexural strength increased as the sintering time increased and showed a maximum (615 MPa) at 6 h. The relative density and flexural strength increased as the additive content increased.

Effects of binary conductive additives on electrochemical performance of a sheet-type composite cathode with different weight ratios of LiNi0.6Co0.2Mn0.2O2 in all-solid-state lithium batteries

  • Ann, Jiu;Choi, Sunho;Do, Jiyae;Lim, Seungwoo;Shin, Dongwook
    • Journal of Ceramic Processing Research
    • /
    • v.19 no.5
    • /
    • pp.413-418
    • /
    • 2018
  • All-solid-state lithium batteries (ASSBs) using inorganic sulfide-based solid electrolytes are considered prospective alternatives to existing liquid electrolyte-based batteries owing to benefits such as non-flammability. However, it is difficult to form a favorable solid-solid interface among electrode constituents because all the constituents are solid particles. It is important to form an effective electron conduction network in composite cathode while increasing utilization of active materials and not blocking the lithium ion path, resulting in excellent cell performance. In this study, a mixture of fibrous VGCF and spherical nano-sized Super P was used to improve rate performance by fabricating valid conduction paths in composite cathodes. Then, composite cathodes of ASSBs containing 70% and 80% active materials ($LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$) were prepared by a solution-based process to achieve uniform dispersion of the electrode components in the slurry. We investigated the influence of binary carbon additives in the cathode of all-solid-state batteries to improve rate performance by constructing an effective electron conduction network.

Effect of Additives on the Radiation-Induced Grafting of Styrene onto Polypropylene Fabric (폴리프로필렌 부직포에 스틸렌의 방사선 그라프트 반응에서 첨가제의 영향)

  • Park, Jong Shin;Nho, Young Chang;Jin, Joon-Ha;Lee, Myun Zu
    • Applied Chemistry for Engineering
    • /
    • v.7 no.5
    • /
    • pp.938-945
    • /
    • 1996
  • The present studies are to describe the grafting reaction of styrene in various solvents to polypropylene fabric by the simultaneous method using Co-60. The influence of various factors such as absorbed dose, dose rate, type of solvent, acid and multifunctional monomer were evaluated. At constant absorbed dose, the grafting yield was found to be higher at low dose rate. The initial rate of grafting was found to be proportional to a 0.56 power of dose rate. The inclusion of mineral acid in the grafting solution led to an increase in radiation grafting yield at almost all monomer concentration examined. Multifunctional monomer was also effective to increase grafting yield. The addition of both acid and multifunctional monomer was found to accelerate the grafting yield much more than the separate addition of two additives.

  • PDF

Liquid Phase Sintering of Silicon Carbide (탄화규소의 액상소결)

  • 김원중;김영욱
    • Journal of the Korean Ceramic Society
    • /
    • v.32 no.10
    • /
    • pp.1162-1168
    • /
    • 1995
  • Systematic studies of the effects of additives and processing variables on the sintered density and the effect of crystalline forms of starting powders on the microstructure of pressureless sintered silicon carbide are described. Oxide additives were effective for the densification of SiC up to 96% of theoretical density at temperature as low as 185$0^{\circ}C$. Use of embedding powder increased the sintered density, up to 98% of theoretical density, by decreasing the weight loss during sintering. Composite type duplex microstructure has been developed due to the $\beta$longrightarrow$\alpha$ phase transformation of SiC by sintering at 185$0^{\circ}C$ and heat treatment at 195$0^{\circ}C$ for 1h.

  • PDF

Fabrication and Physical Properties of Honeycomb Type Cordierite Ceramic Filter Using Fly-Ash (플라이 애쉬를 이용한 코디어라이트 세라믹 하니컴 필터 제조 및 물성)

  • Kim, Sung-Jin;Bang, Hee-Gon;Park, Sang-Yeup
    • Journal of the Korean Ceramic Society
    • /
    • v.43 no.6 s.289
    • /
    • pp.351-357
    • /
    • 2006
  • The fabrication process of the honeycomb filter was investigated using synthesized cordierite with the addition of pore former and extrusion additives (either organic matter or graphite). Also, the effect of additives on the resultant properties of honeycomb filter such as porosity, thermal expansion coefficient and mechanical strength were investigated. With increasing the organic matter up to 10 wt%, porosity was increased but compressive strength was decreased. With increasing the graphite content, however, both porosity and compressive strength were increased. The specimen with an optimum processing condition (C-17A30G, sintering at $1150^{\circ}C$) was demonstrated 59% in porosity, 69 MPa in compressive strength, and $2.4{\times}10^{-6}/^{\circ}C\;(25{\sim}1000^{\circ}C$) in thermal expansion coefficient, which physical properties are appropriate for the honeycomb filter applications.