• Journal of Ginseng Research
• /
• v.34 no.4
• /
• pp.282-287
• /
• 2010

An optimized manufacturing process was developed for the production of high-quality loess red ginseng using a hybrid process in which loess (yellow earth) was incorporated into the conventional ginseng manufacturing process system. We designed conventional ginseng processing facilities and prepared the loess module by baking loess that contained 42% water at $860^{\circ}C$ for 8 h. The loess module showed excellent performance in deodorization and humidity control. The optimum steaming temperature at which maximum expansion of starch organisms occurred was 90 to $98^{\circ}C$.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.969-970
• /
• 2006

This paper develops a recognition system of assembly parts using a hardware independent image module. Using a shared memory, the image module consists of the image acquiring process and the image processing process. We preprocess an acquisition image from the module, approximate the image edges to an ellipse, and then recognize an assembly part by matching the ellipse to a model base one.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.337-339
• /
• 2003

This paper describes the SAR geocoding module, which is the sub-module of a IRHIS ('Integrated RS s/w for High resolution satellite ImageS'): package of 'Development of High Resolution Satellite Image Processing Technique' project in Electronics and Telecommunications Research Institute (ETRI). The function of this module is following. 1) Orbit Type : ERS1/ERS2, RADARSAT 2) Data Format : SAR CEOS Format(Single Look Complex) 3) Function: - Geocode : Generate a map projected SAR image based on only orbit information - Orthorectify: Generate a rigorous geocoded SAR image with a DEM information In this paper, we briefly describe the algorithm that is adopted to the functions, and component architecture.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.11 s.104
• /
• pp.1268-1275
• /
• 2005

Vibration in Engine module could be reduced by introducing a balance shaft module which has one or more unbalanced rotors. Since the unbalanced rotor is installed in an opposite direction of the free force or unbalance moment by engine component, the unexpected vibration could be decreased kinematically. The essential equation of the unbalanced rotor was Presented for two cases, 3 in-line and 4 in-line cylinder engine type, And the efficiency of the balance shaft is investigated by the vehicle testing that is focused on measuring the reduced vibration level when adapting a balancing module. With the signal processing of measured signals, some important issues on design the balancing shaft could be derived and the overall design process is explained in the final part including the peripheral component, i.e. housing and bush.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1805-1816
• /
• 1999

This paper presents the Module Class Dependency Graph for expressing the dependency relations between classes effectively. The object-oriented language is developed independently at design time, and consists of relationship between classes. Therefore we need to consider these characteristics of independence, and to express effectively the relation of classes which is existed in class hierarchy. In the System Dependence Graph and Class Dependence Graph, the relationship of classes is not expressed. To express the class relationship, we propose the Module Class Dependence Graph, and we verify the effectiveness of this method applying to object constructor, inheritance relationship and dynamic binding. Also, we presents the expressing method of parameter to identify the member data of classes. Using this Module Class Dependency Graph, we can analyze the relationship of module class correctly at design time. This method can be applied to reverse engineering, testing, visualization and other various fields to analyze system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.161-168
• /
• 2006

In this paper, we propose a method for the pattern inspection of LCD module using the color compensation and pattern matching. The pattern matching is generally used for the inspection method of LCD module at the industry. LCD module has many defections such as the brightness difference of the back light, the optic feature of liquid crystal, the difference of the light penetrated by driving LCD and the color difference by the lighting. The conventional method without the color compensation can not solve these defections and decreases the efficiency of inspecting LCD module. The method proposed to inspect defective badness through the pattern matching after it compensated color difference of the LCD occurred by the various causes. At first, it revises with setting by standard tone of color with the LCD pattern of the reference image. And It perform the preprocessing and pattern matching algorithm on the compensated image. In experiment, we confirmed that this algorithm is useful to detect some defections of LCD module. The proposed methods was easy to detect the faulty product.

• Geophysics and Geophysical Exploration
• /
• v.26 no.3
• /
• pp.103-113
• /
• 2023

In the oil and gas exploration market, various cableless seismic systems have been developed as an alternative to improve data acquisition efficiency. However, developing such equipment at a small scale for academic research is not available owing to highly priced commercial products. Fortunately, building and experimenting with open-source hardware enable the academic utilization of cableless seismic equipment with relatively low cost. This study aims to develop a cableless seismic acquisition module using Arduino. A cableless seismic system requires the combination of signal sensing, simple pre-processing, and data storage in a single device. A conventional geophone is used as the sensor that detects the seismic wave signal. In addition, it is connected to an Arduino circuit that plays a role in implementing the processing and storing module for the detected signals. Three main functions are implemented in the Arduino module: preprocessing, A/D conversion, and data storage. The developed single-channel module can acquire a common receiver gather from multiple source experiments.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2005.11a
• /
• pp.26-31
• /
• 2005

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.220-232
• /
• 2012

In this paper, we investigate the correlation result due to the problems of delay tracking and fringe rotation module in the VCS(VLBI Correlation Subsystem). The VCS, FX-type correlator, adopts the delay tracking and fringe rotation module in order to compensate the delay change and fringe phase of wave signal from the radio source by Doppler's effect. The phase of observed data is also compensated by means of delay tracking and fringe rotation in the correlator, but we confirmed that the phase is unstable by applying long integration period of AIPS(Astronomical Image Processing System) rather than correlator. And the delay value of observed data has the errors of several tens nanoseconds than normal case at the analysis of correlation result. In addition, we found that the phase of correlation results is not connected as the unit of FFT-segment because the initial fringe phase at the fringe rotation module is not correctly determined. In this paper, in order to solve these problems, the original direction of 90 degree phase jump is reversely modified when the bit-shift occurred at the delay tracking. And the initial fringe phase at the fringe rotation module is correctly modified by using the initial phase of observed data. In addition, the parameter calculation module was abnormally operated as designed in the fringe rotation. So, the logical program by the VCS is modified so as to calculate the parameters correctly. Through the experiments of correlation processing over the above problems, the modified proposal algorithm is adequately corrected to the data analysis results, so that the experimental results make it clear for us to operate the developed VCS hardware correlator normally.

• The KIPS Transactions:PartC
• /
• v.11C no.4
• /
• pp.539-544
• /
• 2004

This paper presents the implementation of the bluetooth headset and the audio gateway connected to the mobile Phone in the embedded environment. The bluetooth module includes the BC02 processor chip, the BCSP02 firmware and the bluelab software Including bluetooth protocol stack. The above components in the bluetooth module developed at CSR company are used as the development environment. The application program using API functions supported by bluelab is coded by C language and loaded on the flash ROM of the bluetooth module. The cail processing capacity measuring the call setup time and the clearing time between the audio gateway and the headset is considered as the performance parameter of the developed systems. As a call setup and clearing time between the audio gateway and the headset is about 88.8ms, the call processing capacity is about 11 calls per second. Therefore the performance result is satisfied in the aspect of the call processing time.