• Journal of the Korea Computer Industry Society
• /
• v.3 no.1
• /
• pp.27-34
• /
• 2002

There is much interest on information communications owing to the rapid development of network and IT(Information Technology). Analog signals are converted into digital signals for information communications. However, it is very difficult to completely erase the distortion induced during the conversion of analog signals such as voices and images into digital signals. Existing audio graphic equalizer requires very complex processes to calculate the gain and coefficients of the higher-order filter which is required to generate natural sound and to satisfy the need of each person. Unfortunately it is uneconomical and very difficult to embed the existing digital audio equalizer in the system because of the complexity of the existing digital audio equalizer for high quality sound. This paper discusses the design of a new digital audio graphic equalizer(DAGEQ) which can improve system performance and the quality of audio sound, and can be embedded in the system. This new DAGEQ is designed so that the gain can be controlled automatically. The automatic control of coefficients and gain empowers real time processing and the improvement of audio quality.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.302-308
• /
• 2021

A 12-bit 10-MS/s pipeline analog-to-digital converter (ADC) is proposed for image processing applications. The proposed pipeline ADC consists of a sample and hold amplifier, three stages, a 3-bit flash analog-to-digital converter, and a digital error corrector. Each stage is operated by using a 4-bit flash ADC (FADC) and a multiplying digital-to-analog converter (MDAC). The proposed sample and hold amplifier increases the voltage gain using gain boosting for the ADC with high resolution. The proposed pipelined ADC is designed using a 180-nm CMOS process with a supply voltage of 1.8 and it has an effective number of bit (ENOB) of 10.52 bits at sampling rate of 10MS/s for a 1-V_pp differential sinusoidal analog input with frequency of 1 MHz. The measured ENOB is 10.12 bits when the frequency of the sinusoidal analog input signal is a Nyquist frequency of approximately 5 MHz.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.835-842
• /
• 2004

In this paper, we have analyzed the MC-DS/CDMA system with input signal synchronized completely through adjustment of the gain in the PLL loop, by using the hybrid SC/MRC-(2/3) technique, which is said to one of the optimal diversity techniques under the multi-path fading environment, assuming that phase error is defined to the phase difference between the received signal from the multi-path and the reference signal in the PLL of the receiver. Also, assuming that the regarded radio channel model for the mobile communication is subject to the Nakagami-m fading channel, we have developed the expressions and performed the simulation under the consideration of various factor, in the MC/DS-CDMA system with the hybrid SC.MRC-(2/3) diversity method, such as the Nakagami fading index(m), $the\;number\;of\;paths\;(L_p),$ the number of hybrid SC.MRC-(2/3) $diversity\;branches\;(L,\;L_c),$ the number of users (K), the number of subcarriers (U), and the gain in the PLL loop. As a result of the simulation, it has been confirmed that the performance improvement of the system can be achieved by adjusting properly the PLL loop in order for the MC/DS-CDMA system with the hybrid SC/MRC-(2/3) diversity method to receive a fully synchronized signal. And the value of the gain in the PLL loop should exceed 7dB in order for the system to receive the signal with prefect synchronization, even though there might be a slight difference according to the values of the fading index and the spread processing gain of the subcarrier.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1251-1257
• /
• 1999

Two experiments were conducted to determine the effects of roasting and extrusion on nutritional value of conventional and low-inhibitor soy beans for nurser-age pigs. In Exp. 1, 100 weaning pigs (7.5 kg average initial BW) were used in a 35-d growth assay to determine the effects of processing method (roasting in a Rast-A-Tron$^{TM}$ raster vs extrusion in an Insta-Pro$^{TM}$ extruder) on the nutritional value of Williams 82 soybeans with (+K) and without (-K) gene expression for the Kunitz trypsin inhibitor. Treatments were 48% soybean meal with added soybean oil, +K roasted, +K extruded, -K roasted and -K extruded. All diets were formulated to contain 3.5 Mcal DE/kg, with 0.92% lysine for d 0 to 14 and 0.76% lysine for d 14 to 35 of the experiment. The lysine concentrations were 80% of NRC (1988) recommendations to accentuate difference in response to protein quality and lysine availability. For d 0 to 14, pigs fed extruded soybeans (+K and -K) had greater ADG (p<0.001), ADFI (p<0.09) and gain/feed (p<0.01) than pigs fed roasted soybeans. For d 14 to 35 and overall, the same effects were noted, i.e., pigs fed extruded soybeans had greater ADG, ADFI and gain/feed than pigs fed roasted soybeans (p<0.03). Also, pigs fed -K soybeans were more efficient (p<0.008) than pigs fed +K soybeans. In Exp. 2, 150 weanling pigs (7.0 kg average initial BW) were used in a 35-d growth assay. All diets were formulated to contain 3.5 Mcal DE/kg, with 1.25% lysine for d 0 to 14 and 1.10% lysine for d 14 to 35 of the experiment. The lysine concentrations were formulated to be in excess of NRC recommendation to determine if differences in nutritional value of the soybean preparations could be detected in protein-adequate diets. For d 0 to 14 (p<0.06), 14 to 35 (p<0.03) and 0 to 35 (p<0.02), pigs fed extruded soybeans had greater ADG and gain/feed than pigs fed roasted soybeans. Apparent digestibilities of DM, N and GE were greater for diets with extruded soybeans than diets with roasted soybeans and diets with soybean meal and soybean oil were intermediate. The response to extrusion processing was greater with -K than +K soybeans, with pigs fed extruded -K soybeans having the greatest growth performance and nutrient digestibilities and lowest skin-fold thickness of any treatment. In conclusion, extrusion yielded a full-fat soy product of greater nutritional value than roasting. Also, selection against genetic expression of the Kunitz trypsin inhibitor improved nutritional value of the resulting soybean preparations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.1-10
• /
• 2002

A space-time concatenated convolutional and differential coding scheme is employed in a multiuser direct-sequence code-division multiple-access(DS-CDMA) system. The system consists of single-user detectors (SUD), which are used to suppress multiple-access interference(MAI) with no requirement of other users' spreading codes, timing, or phase information. The space-time differential code, treated as a convolutional code of code rate 1 and memory 1, does not sacrifice the coding efficiency and has the least number of states. In addition, it brings a diversity gain through the space-time processing with a simple decoding process. The iterative process exchanges information between the differential decoder and the convolutional decoder. Numerical results show that this space-time concatenated coding scheme provides better performance and more flexibility than conventional convolutional codes in DS-CDMA systems, even in the sense of similar complexity Further study shows that the performance of this coding scheme applying to DS-CDMA systems with SUDs improves by increasing the processing gain or the number of taps of the interference suppression filter, and degrades for higher near-far interfering power or additional near-far interfering users.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.186-193
• /
• 2002

A new integrated torque and speed control algorithm has been proposed for the load balancing of rollers in continuous strip processing line(CSPL). Using the proposed method, the output torque and speed can be controlled to follow the reference in spite of nonideal effects such as the speed reference error and/or the controller gain difference between rolls. This new algorithm can be easily implemented in a motor drive system of each roll as it does not require the torque feedback of the others. Through the simulation and experiments for a simple CSPL consists of four driven rolls, the load balancing performance of the proposed scheme is presented and compared with that of conventional method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.1
• /
• pp.26-30
• /
• 2006

For the purpose of developing capacitive humidity sensor having interdigital electrodes, interdigital electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thickness. For the development of ASIC, switched capacitor signal processing circuits for capacitive humidity sensor were designed and simulated by Cadence using $0.25{\mu}m$ CMOS process parameters. The signal processing circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control. The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is $0.4%R.H./^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of $3%R.H.{\sim}98%R.H.$. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigital electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc.

• ETRI Journal
• /
• v.17 no.4
• /
• pp.25-35
• /
• 1996

This paper derives the symbol error probability for quadrature amplitude modulation(QAM) with L-fold space diversity in Rayleigh fading channels. Two combining techniques, maximal ratio combining(MRC) and selection combining(SC), are considered. The formula for MRC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an additive white Gaussian noise(AWGN) channel over a chi-square distribution with 2L degrees of freedom. The obtained formula overcomes the limitations of the earlier work, which has been limited only to deriving the symbol error rate(SER) of QAM with two branch MRC space diversity. The formula for SC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an AWGN channel over the distribution of the maximum signal-to noise ratio among all of the diversity channels for SC space diversity has been reported yet. Analytical results show that the probability of error decreases with the order of diversity gain per additional branch decreases as the number of branches becomes larger. On the other hand, the performance of 16 QAM with MRC becomes much better than that of SC as the number of branches becomes larger. By giving the order of diversity, L, and the number of signal points, M, we have been able to obtain the SER performance of QAM with general space diversity. These results can be used to determine the order of diversity to achieve the desired SER in land mobile communication system employing QAM modulation.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1E
• /
• pp.33-42
• /
• 2003

Kuo et al proposed an on-line method for an adaptive prediction error filter for improving secondary path modeling performance in the modeling method of the secondary path. This method have some disadvantages, namely having to use additive noise with the result that noise control performance is not good since it is focused on the estimated performance of the secondary path. In this paper, we proposes a modified Kuo model using gain control parameter and delay. It uses a reference signal for additive noise to improve the problems in the existing Kuo model.

• Communications for Statistical Applications and Methods
• /
• v.11 no.2
• /
• pp.255-264
• /
• 2004

Due to a computerized data processing, there are many cases when we encounter a huge data set. On the other hand, advances in computing technologies make it possible to deal with a huge data set. One important area is the data mining. In this paper we consider data mining when the dependent variable is binary. The proposed method is to use the poly-class model when the independent variables consists of continuous and discrete variables. An example is provided.