• 기술혁신학회지
• /
• 제4권1호
• /
• pp.64-78
• /
• 2001

The 21st century is characterized by knowledge-based economy or society. The most important features of this knowledge society are the close relationship between science and technology, and the birth of science-based technologies or industries. Bioindustry which is the core area in this era is a representative science-based industry(SBI). In SBIs including BT(biotechnology) and ICT(information and communication technology), the creation of scientific knowledge and the ability to capitalize on that are very important. The United States leadership in research across the spectrum of science and technology is the result of the success in both achieving high level of research and capitalizing on that enabled them to grow. Capitalization is the process that transforms the results of research into practical concrete national benefits. It is such a dynamic process that cant be clearly modeled. In this study, we propose the dynamic capitalization process for innovation of SBIs in terms of the fuel and engine and analyse our potential.

• World Technopolis Review
• /
• 제3권2호
• /
• pp.78-88
• /
• 2014

This study is concerned with the process of technology transfer and commercialization. It is focused on the entrepreneurial development through the university business incubation process of Thailand. The study analyzes the leading university business incubators (UBIs) as well as major science and technology incubators to understand the strategies for commercialization of technology. The analyses of results, based on the Triple Helix model, have shown that the incubation program is one of the major policy mechanisms to support innovation and suggested that UBIs should act as an intermediary between the spheres of university and industry to provide interactive linkages and promote effective utilization of university research. The empirical study provides theoretical and managerial implications on the government policies to support the entrepreneurial development, innovation development and diffusion.

• 한국비블리아학회지
• /
• 제28권4호
• /
• pp.393-413
• /
• 2017

본 연구는 비즈니스 혁신의 하나인 프로세스 이노베이션에 대한 공공도서관으로의 적용가능성을 탐구한 것이다. 이를 위하여 문헌연구를 통해서 프로세스 이노베이션에 대한 개념을 정의하고 나아가 공공도서관의 사서들을 대상으로 서면 질문조사와 포커스그룹 인터뷰를 병행하여 도서관 업무를 수서 및 정리, 자료실 운영, 이용자 관리, 이용자 서비스, 프로그램, 자원봉사자 관리, 도서관 홍보, 도서관전산화 시스템, 시설 및 비품 관리, 서무와 통계 관리로 대분하고 각 업무별 세부업무를 확인한 다음, 공통분모를 도출하였다. 이어서 구글 행아웃을 통한 공공도서관 사서들과의 다자간 대면 인터뷰를 통하여 수서와 정리, 이용자 관리 업무에 있어서 프로세스 개선의 필요성 및 가능성을 확인하고 프로세스 이노베이션을 적용한 개선방안과 함께 새로운 적용 모델을 제시하였다. 본 연구의 결과, 도서계약 및 희망도서 관련 업무의 절차를 개선하여 보다 신속하게 이용자의 요구를 충족할 수 있는 방안을 제시하였다. 이용자 관리 부분에서는 미국의 30개 공공도서관에 대한 웹 사이트 조사를 통하여 회원가입 시 요구 사항과 가입 절차를 분석하고 나아가 기존 공공도서관의 회원가입 절차에 대한 프로세스 분석을 통하여 개선된 프로세스를 제공함으로써 이용자의 만족도 향상과 함께 도서관 업무 프로세스의 개선에도 기여할 수 있을 것으로 기대한다.

• 기술혁신학회지
• /
• 제20권1호
• /
• pp.205-238
• /
• 2017

디스플레이산업은 세계 최고의 수준을 달성한 한국의 대표적 주력 산업이다. LCD 패널의 대표기업들을 중심으로 한 기존의 연구와는 달리, 본 연구는 가치사슬 관점과 아키텍처 관점을 결합하여 후방가치사슬(upstream) 영역에 속한 소재부품 장비 공급기업에 중점을 둔 산업의 발달구조와 발전추이 특성을 분석하였다. 2002년부터 2015년까지 208개 기업에 대한 매출액 및 연구개발비 자료를 활용하여, 산업의 가치사슬별 성장 및 혁신 특성을 분석하였다. 결과, 소재부품기업과 장비기업은 패널 제조 공정별로 상반된 발전 추이가 있음을 규명하였다. 본 연구는 디스플레이산업과 같이 대규모 시스템 공정산업의 경우는 공정산업의 특성을 반영하여 기존의 가치사슬 관점에 아키텍처 혁신 관점을 반영한 분석 틀을 통하여 향후 산업 기술 전략과 정책의 방향을 제시하였다는 점에 의의가 있다.

• 기술혁신연구
• /
• 제14권3호
• /
• pp.1-21
• /
• 2006

The explosion in creation and utilization of IP including Patent since 1980s has been regarded as typical trend affecting the environment for technological innovation. Korea also has shown massive creation of IP. These stimulate the focused interest on the effectiveness of IP for protecting the innovation output. We try to analyze the determinants of this effectiveness in Korean manufacturing sector in terms of the charactenstics of firm's innovation strategy. It is shown that, for protection for product innovation, as being larger, and as having made innovation, the IP protection is regarded as effective, and firms making cooperative R&D have a higher possibility of using IP protection. And larger firms give a higher recognition to effectiveness of IP protection irrespective of the types of innovation such as product innovation and process innovation.

• 기술혁신학회지
• /
• 제7권2호
• /
• pp.373-395
• /
• 2004

In year 2003, the Daedeok Science Town(DST) has celebrated its 30 years of anniversary and achievement in science and technology development. However, there is a criticism that DST has not played its expected role in Korea's National Innovation System. Recognizing this criticism, the development of DST was evaluated in the perspective of innovation cluster. The research shows that DST has been following the downstream path of evolution - from S＆T development to business development - and is in the early stage of R＆D-driven Innovation Cluster. Not only the development factors of DST innovation cluster were identified but the DST was compared with other internationally recognized innovation clusters. Finally, it is suggested that the business related functions should receive due attention in innovation cluster policy.

• Journal of Computational Design and Engineering
• /
• 제3권1호
• /
• pp.71-90
• /
• 2016

Steel nitriding is a thermo-chemical process leading to surface hardening and improvement in fatigue properties. The process is strongly influenced by many different variables such as steel composition, nitrogen potential, temperature, time, and quenching media. In the present study, the influence of such parameters affecting physic-chemical and mechanical properties of nitride steels was evaluated. The aim was to streamline the process by numerical-experimental analysis allowing defining the optimal conditions for the success of the process. Input parameters-output results correlations were calculated through the employment of a multi-objective optimization software, modeFRONTIER (Esteco). The mechanical and microstructural results belonging to the nitriding process, performed with different processing conditions for various steels, are presented. The data were employed to obtain the analytical equations describing nitriding behavior as a function of nitriding parameters and steel composition. The obtained model was validated, through control designs, and optimized by taking into account physical and processing conditions.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.593-606
• /
• 2018

Purpose: The purpose of this study is to examine the Hawthorne effect on healthcare service process innovation, by investing the difference between checklist items of patients and doctors on direct clinical observations (DCO) and the retrospective clinical review (RCR). Methods: The data set consisted of 30 patients and 30 doctors respondents. T-tests were used to perform a comparative analysis of DCO and RCR items between patients and doctors by pre and post examinations. Results: The results indicate that there was a difference between the non-prior notice checklist items of the patients and doctors, while there was no difference of the post-examination checklist items between the patients and doctors. Conclusion: This study provides useful information and can be applied to the improvement of patient experience through healthcare service process innovation. The results of this study also offer practical insights about how hospitals can motivate providers to participate in healthcare service process for improved quality care by the Hawthorne effect. The study contributes to the existing knowledge of the Hawthorne effect for effective strategies for providing quality care.

• 경영과학
• /
• 제13권1호
• /
• pp.135-156
• /
• 1996

The purpose of this paper is to study the links between manufacturing strategy and change programs of manufacturing firms in Korea. The nature of our analysis is more descriptive than normative or confirmative. First, we investigate the linkage between manufacturing strategy, manufacturing capability, change programs and performance measurement systems. Secondly, we intend to explore an empirical typology of manufacturing strategy and change programs. The initial findings of the study are as follows: Linkage between manufacturing strategy and change programs of manufacturing firms was not apparent. Flexibility as a strategic priority is positively related to the innovative change programs. There are two distinctive strategies of manufacturing firms in Korea, namely, quality strategy and balanced strategy. We identified three types of change programs, which are incremental change, administrative innovation, and process innovation. Incremental change group has represented low factor score in the change program dimensions. The firms in administrative innovation group mainly depend on information systems and business reengineering. Korean manufacturing firms seem to pursue process improvement by trying simultaneously incremental change in the process, managerial process improvement, and a little bit of innovative change. Performance variable utilization of the firms are not significantly different along with manufacturing strategies and change programs. We found, however, learning and improvement performance dimension is significantly related to flexibility variables. Process innovation group marked high score in usage of learning and improvement indices. The findings of this study seem to have various implications on realigning the manufacturing strategy, change programs, and performance systems in Korean firms.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.293-302
• /
• 1999

This paper presents an efficient reengineering technique for the logistics process innovation which is the foundation of supply-chain management. Based on consulting experience on the domestic manufacturing firms, this paper provides promotion step for logistics innovation and six reengineering points including check system for customer's credit limit, check system of real-time inventory information, automatic system for sequential production plan, automatic order-release system, automatic packing system, and happy-call system for order-forward information. For each reengineering point, application cases in domestic industry are also presented.