• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.378-386
• /
• 1999

The integrated system for the structural analysis of space frame is made up 4 modules ; pre-process module, structural analysis module, optimum member design module and post-process module. Re-process module of these 4 modules involves data input module and structure modeling module. This study is to develope an efficient modeling program as a basic for development of pre-process module. This modeling program generates geometric information of space frame and performs the input fie form for structure analysis only by input general data. User can mode1 space frame efficiently within shut time by using this program.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.243-244
• /
• 2012

Recently, research has been actively conducted for getting interested in unit module housing. However, the domestic unit modular housing research in the early stages yet, so the major process for research is lacking. Explore all these reasons fit with domestic unit housing development this paper, focusing on the process of shipping cargo by truck, transport unit module was studied. The purpose of this paper is to present new ideas and derive the direction of the development of the equipment safely and effectively fixed to the unit module of the transport unit module that will be helpful in the development of the equipment required for the transport process of the next unit module.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1231-1236
• /
• 2007

Balance Shaft Module is module parts that is installed to vehicles engine to reduce noise and vibration of vehicles engine. Balance Shaft Module's performance exerts important influence on performance of engine. Therefore, must be able to warrant quality and performance of Balance Shaft Module. Existing product found and revised error at continuous process of production, and estimated failure mode in Balance Shaft Module. Previous method hard to secure product that performance is excellent, and bring a lot of damages economically. Therefore, development of inspectin system for quality inspection of parts and performance test of assembly is essential in Balance Shaft Module. In this study, represented development process of automatic dynamic inspection system to test performance and detect breakdown of Balance Shaft Module that is producing in Dongbo.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.269-272
• /
• 2004

The target of this paper is the development of Web-based monitoring & control system which is for effective and economic management of mold manufacturing process. This system has three module; G-code Control, Monitoring Module and Result analysis module. Also, as the environment of development is based on internet, this system which is possible to the remote site management of manufacturing process works on Web. To be possible to control the manufacturing monitoring by client, each module is made ActiveX control and is based on socket communication. This system makes the foundation which is possible to manage the mold manufacturing process efficiently from remote site by matching real-time monitoring with manufacturing process in factory using G-code control and displaying the result of manufacturing using Ch-CGI.

• 유통과학연구
• /
• 제21권2호
• /
• pp.45-52
• /
• 2023

Purpose: The Malaysia Education Blueprint is primarily concerned with the transformation of students' minds through the curriculum offered at the school level (2013-2025). Diversity in the application of teaching and learning methods is one means of achieving the transformation of students' minds through the Secondary School Standard Curriculum. Consequently, the production of ExSheetLink's Module for Accounting Education is the primary outcome of this study, which had three objectives: the need for ExSheetLink's Module in the process of producing financial statements for Accounting Students in secondary school to the Accounting Teacher; and the design of ExSheetLink's Module that meets the entire process in the production of financial statements for Accounting Students in secondary school based on the Documents Curriculum and the Accounting Students' needs. Research design, data and methodology: This study outlines the research framework for module development in accordance with the Design and Development Research Method, which combines multiple research techniques (Mixed Method). Results: The development of ExSheetLink's Module is completed and can be used for the level of effectiveness purposes. Conclusion: The transformation of Accounting Students' minds is a success thanks to the ExSheetLink Module. Researchers also suggested that all Malaysian Secondary School accounting students test the ExSheetLink Module.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2407-2409
• /
• 2005

As the cumulative amount of spent fuel increases, the reliable and effective management of the spent fuel has become a world-wide mission. For this mission, KAERI is developing the Advanced Spent Fuel Conditioning Process (ACP) as a pre-disposal treatment process for spent fuel. Conventional approach to the development of the process and the remote operation technology is to fabricate the process equipment on the same scale as the real environment and demonstrate the remote handling operation using simulated fuel called a mock-up test. But this mock-up test is expensive and time consuming, since the design may need to be modified and the equipment fabricated again to account for the problems found during a testing. To deal with this problem, we developed a digital mockup for the ACP. Also, for an effective utilization of the digital mockup, we developed user interface modules such as the data acquisition and display module and the external input device interface module. The result of this implementation shows that a continuous motion of the manipulator using the external device interface can be represented easily and the information display screens responded well to the simulation situation.

• 한국연초학회지
• /
• 제23권1호
• /
• pp.53-59
• /
• 2001

To decrease of deviations from target specifications and excessive variability around targe, we exclusively designed statistical process control system involving general manager and expert tool for cigarette manufacturing process. This system is a unique programming environment for the development of total process control software including various control charts according to data type and process capability analysis. Also this system includes the statistical analysis module to analyze defective causes immediately when inferior products are made and the module to offer regular reports. This system is customized considering the manufacture environment based on the opinions of workers.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.102-107
• /
• 2000

This study describes computer-aided design system for stepped asymmetric forgings. To establish the appropriate process sequence, an integrated approach based on a rule-base system was accomplished. This system has four modules, which are undercut prevention module, shape cognition module, 3D modelling module and corner/fillet correction module. These modules can be used independently or at all. The proposed shape cognition method could be widely used in forging design of asymmetric parts.

• 한국정밀공학회지
• /
• 제8권1호
• /
• pp.105-115
• /
• 1991

This paper describes an integrated CAD and CAPP system for prismatic parts of injection mold which generates a complete process plan automatically from CAD data of a part without human intervention. This system employs Auto CAD as a CAD model and GS-CAPP as an automatic process planning system for injection mold. The proposed CAD/CAPP system consists of three modules such as CAD data conversion module, manufacturing feature recognition module, and CAD/CAPP interface module. CAD data conversion module transforms design data of AutoCAD into three dimensional part data. Manufacturing feature recognition module extracts specific manufacturing features of a part using feature recognition rule base. Each feature can be recognized by combining geometry, position and size of the feature. CAD/CAPP interface module links manufacturing feature codes and other head data to automatic process planning system. The CAD/CAPP system can improve the efficiency of process planning activities and reduce the time required for process planning. This system can provide a basis for the development of part feature based design by analyzing manufacturing features.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.109-114
• /
• 2011

An impeller is difficult to machine because of severe collision due to the complex shape, overlapping and twisted shape that form impeller blades. So, most CAM software companies have developed CAM module for manufacturing impeller in addition to their CAM software. But it is not still easy for inexperienced users to machine impellers. The purpose of this paper is the development of automatic CAM module for manufacturing impeller(E-ICAM) which is based on visual basic language and it is used CATIA graphical environment in order to be easily machining impellers. Automatic CAM module for manufacturing of impellers generates tool path, and proposes recommended cutting condition according to the material of stock and tool. In addition, it has also included a post processor for 5-axis control machining. Therefore the user can easily machine impellers using this automation module.