• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.527-531
• /
• 2016

Emulsification is a fundamental process of cosmetics manufacture which produces stabilized emulsion by dispersing the liquid from the one side to the other by adding an emulsifier in an immiscible liquid. Various types of emulsifiers can produce various cosmetics. In this study, we evaluated the stability of emulsifier by measuring variations in the viscosity, particle size and particle size distribution. HLB values of nonionic emulsifiers which are used in this paper are 12.9, 12.9, 12.6 and 12.5 for EMU-01, EMU-02, EMU-03 and EMU-04, respectively. All types of emulsions showed an increase in the particle size and a decrease in the viscosity with the time. Also they showed a decrease in the particle size and an increase in the viscosity with respect to increasing the stirring speed. However, the stability of emulsions up to 56 days was secured by observing the non-separation of emulsions. In addition, the viscosity of the emulsions was measured in the order of EMU-01 > EMU-02 > EMU-03 > EMU-04 while the size of particles was measured in the order of $EMU-01{\approx}EMU-02$ > $EMU-03{\approx}EMU-04$. This indicates that our emulsion can be potentially used for preparing a cosmetic facial cream.

• Journal of Conservation Science
• /
• v.28 no.1
• /
• pp.29-37
• /
• 2012

This study discusses a mercury amalgam gilding technique and examines how the color, surface and section of the gilt layer changes as the condition of heat treatment with mercury amalgam gilt object is changed. Some previous studies have mentioned reasons for various colors on gilt bronze artifacts depending on gilding manufacture and environment. However, reason for reddish color with gold on the artifacts' surface brought on high temperature corrosion has yet to be discussed and analyzed. A methodology was found in representing the mercury amalgam gilding technique and heat treatment test. According to the result of the heat treatment test, in the conditions of higher temperature and longer time, the oxidized layer on the gilt layer was distributed more widely and in the part when the oxide layer was eliminated, the gilt layer with a reddish color was observed. Moreover, in the surface observation of the specimen on which yellow and reddish colors were agitated, the changing aspects of its surface condition differed by colors. When investigated the section, it was observed that the void density and size became larger. After a test, the surface components changed; the temperature of heat treatment increased, component ratio of Hg and Au decreased gradually but component ratio of Cu increased. In regard to the gilt layer, as the time was longer and the temperature became higher for the heat treatment, the component ratio of Au and Cu by layers tended to change in inverse proportion. It is concluded that gilding techniques and the burial environment can make a difference in the surface color of the gilt layer on the gilt bronze artifacts, the high temperature corrosion that occurs by heat after they are manufactured is also one of the factors that affects their surface color.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2020

PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.6
• /
• pp.1332-1340
• /
• 2009

Moxa-combustion therapy makes use of heat stimulus and chemicals result form when cauterize the skin with moxa cones to medical cares. Despite an extensive evidence-base guiding the selection of stimulation parameters and attributes of subject, little methodologically research regarding the attributes of moxa cautery in need to provide effective stimulation. To determine moxibustion's effects of the three different moxa cautery made by three different company(as A, B, C), the small intestinal motility in rats were observed after moxibustion at ST36. Under anesthesia, each intensities(1, 5, 10 times), two regions(left and right at ST36) and a quantity(as number of 1, 5, 10 times at once) were applied to the groups divided with sex. In each intensities groups, the A product made increase with 5, 10 times in male and female group. The B and C product made increase with 10 times in male group and the B product made increase with 1, 5, 10 times and the C product made increase with 5 times in female group. In two regions(left and right at ST36) groups, the A and C product made increase with 1(right), 5(right) times and the B product made increase with 1(left), 10(left), 10(right) times in male group. In female group, the A product made increase with 5(left), 5(right), 10(right) times and the B product made increase with 1(left), 10(left), 10(right) times and the C product made increase with 5(left), 10(left) times. In a quantity(as number of 1, 5, 10 times at once) groups, the A and B product did not show any changes but the C product made increase with a quantity of 10 times in male group. In female group, The B product made increase with a quantity of 1 times and the C product made increase with a quantity of 5 times, but the A product did not show any changes. Three different moxa cautery made by three different company made differents result in each group divided with sex. With these results, it was suggested that we should consider the a process of manufacture and moxa cautery's quality for the adequate value of moxibustion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.269-270
• /
• 2009

The biased vertical alignment (BVA) liquid crystal (LC) mode shows a has a distinct advantage of lower manufacture cost due to the elimination of a lithographic process step to form either ITO-patterning or protrusions on the color-filter substrates. However, those devices have complex voltage conditions which is the respective induce voltage on common electrode, pixel electrode and bias electrode when positive and negative frame. In order to overcome the complex voltage condition, the pretilt angles is controlled by photo polymerization of the UV-curable reactive mesogen (RM). According to our studies, voltages to the cell are critical to achieve an optimized surface-modified quality BVA (Q-BVA) mode which provides the well defined reorientation of the LCs with respect to an electric field.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.549-556
• /
• 2015

Anti-insect repellent silica sol from mixture with silica and anti-insect repellent solution extracted from medicinal herbs was prepared. The micron size porous sphere powder with anti-insect repellent solution was prepared by the spray drying method. The characteristic of anti-insect repellent powder using spray drying method was analyzed by FE-SEM, PSA, TGA with the concentration of anti-insect repellent sol (anti-insect repellent solution and silica) and conditions of spray drier. The average particle size of 4, 7 wt% and 10 wt% of anti-insect repellent sol concentration were 8.3, $9.5{\mu}m$ and $11.7{\mu}m$, respectively. The particle size is increasing with high concentration of anti-insect repellent sol. Other hands, particle size as the temperature of inlet nozzle and velocity of sol injection were nearly same at high velocity of gas injection. Also, Anti-insect repellent impregnation in porous sphere powder were confirmed by TGA methode and its thermal property was stable up to $200^{\circ}C$. We expect that anti-insect repellent powder is applied for plastic compound and process of film manufacture.

• Archives of design research
• /
• v.15 no.4
• /
• pp.177-188
• /
• 2002

A thousands of chairs have designed from the Victorian era to the present. Thonet's Nol4 chair in 1859, Wright's high-back chair in 1904, Ritveld's red/blue chair in 1917, Breuer's Wassily chair in 1925, Aalto's Paimio chair in 1932, Eames's DAR chair in 1948, Piero Gatti's Sacco chair in 1969, Starck's Von Volgelsang chair in 1984, Stumpf's Aeron Chair in 1992, Little's 'Coat of arms' chair in 1994 - the list of architects who have seized the opportunity to express their theories in the design of a chair is seemingly endless. Architects such as Machintosh(1868-1928), Wright(1807-1959), Aalto(1898-1976) included chairs within their artistic schemes for interiors and buildings. But as the manufacture of chairs moved away from the domain of the craftsman towards that of the industrial process, architects were also ideally positioned, with their background knowledge of engineering, to pioneer innovative chair design within the constraints of modern manufacturing technology. Beyond matters of function and structure, the fundamental worth of chairs, past or present, lies in their communication of attitudes, ideas and values. The persuasiveness of a chair depend on the clarity of its rhetoric. Chair has become an ideal medium for designers to make their visual statements and construct their individual manifestos. In chair design there is a ping-pong game played out between absurd and useful design, and this game is one way in which the design profession explores itself.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.411-427
• /
• 2015

The purpose of the present study is to examine the objects excavated from the archaeological site of the Nogye Village in terms of their relationships with the iron production facilities such as 1ho smithing hearth and 2ho smelting furnace. 32 samples including slags, iron ores, and wall were analyzed to identify the mineralogical and chemical characterization. In addition, in the case of the 1ho smithing hearth slag, differing points of the cross-section were analyzed to examine its formation in depth. The analysis results suggest that the slags from the each site adjacent to the 1ho smithing hearth and 2ho furnace are related to smithing and smelting process respectively. Furthermore, it is possible to draw some conclusions that the aspects of the increased contents of nonferrous elements such as CaO in the slags in comparison with those of the iron ores are due to various factors such as charcoal ash and analytical reasons rather than an addition of CaO as flux.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1307-1313
• /
• 2011

The mechanical limited slip differential (LSD) in vehicles is being replaced by the electromagnetic LSD because of its fast response and better active control characteristics. The coil housing made of STS 304 is one of the most important parts in the solenoid assembly of the electromagnetic LSD. High geometrical accuracy is a prerequisite for the manufacture of such coil housings, but precision machining is difficult because of the use of STS 304 thin plate and the variance in machining variables. The aim of this study is to optimize the mean and variance of the shape accuracy in the coil housing by finding a robust solution for the machining process conditions. The mean and standard deviation of the jaw contact pressure, cutting speed, and feed rate are considered to be the major parameters for minimizing the geometrical mean and variance. The response surface model based on the second-order Taylor series is combined together to minimize the mean and variance of the shape accuracy of the coil housing.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.149-166
• /
• 1997

This thesis is studied by means of operation diary of the factory ship GAECHEOG in the Sea of Okhotsk and the Sea of Bering from Jul. 1993 to Dec. 1996, We summarize these results as follows : 1. The factory ship GAECHEOG equipped trawl winch able to haul raw fish 700M/T per day and cargo winch able to unload manufactured goods 900M/T. The crews consist of 290~330 persons. 2. Factory machineries equipped surimi making plant able to process about 150M/T per day and fish meal plant able to manufacture about 70M/T per day. 3. The fishing ground from June to Nov. was the western Bering sea lying in the eastern Kamchaka peninsula and from Dec. to May, the fishing period to gather roe of a Pollack, was the Sea of Ohotsk lying in the western Kamchaka peninsula. 4. The buying catch of fish per each voyage from Dec. to May, the fishing period gathering Pollack-roe, was about 17,000~33,000M/T and from Jul. to Oct., the fishing period gathering non Pollack-roe, was about 10,000~21,000 M/T. 5. Raw fish was the most about 33,000M/T of the 2nd voyage in 1994 and was the least about 8,300M/T of the 1st voyage in 1993. Other voyages were about 13,000~18,000M/T. 6. The Pollack buying from Jul. to Nov. in the Bering sea was 5~7 fishes for one row in pan and body length about 40~50cm, and from Dec. to May in the Sea of Ohotsk was 6~8 fishes for one row in pan and body length about 37~45cm. 7. Surimi production in the 2nd voyage in 1994 was the most about 7,300 M/T, in the 1st voyage in 1993 was the least 1,900M/T and in other voyages was about 2,500~3,800M/T. The extraction rate of surimi goods for raw fish was about 17.4~26.5%. 8. Fish meal production in the 2nd voyage in 1994 was the most about 2,300 M/T, in the 1st voyage in 1993 was the least about 780M/T and in other voyages was about 1,100~1,700M/T. The extraction rate of fish meal goods for raw fish was about 7.3~10.7%. 9. Pollack-roe production was very much from Jan. to Apr. and was about 380~700M/T per each voyage. The extraction rate of Pollack-roe for raw fish was about 1.2~4.9%.