• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1365-1367
• /
• 2003

In this paper, element technologies such as soldering. arrangement and lamination processes for photovoltaic module manufacture were examined and described as main processes. Especially solder paste and temperature condition in soldering process, loss factor in arrangement process and process conditions in lamination process are investigated to minimize the electrical loss. As a results, temperature condition in soldering process was found to be critical to contact resistance of electrode and life-time. Productivity of the process decreases dramatically by physical damage during arrangement process. Pressure level and press condition of upper chamber in lamination process were important parameters for the reliability. According to the test result of photovoltaic module, electrical properties dropped about $5{\sim}25%$ after 5 years.

• 소성∙가공
• /
• 제9권5호
• /
• pp.504-511
• /
• 2000

Hydroforming is a forming process enabling circular metal tubes to be produced in complex cross sections along curved axial paths. This forming process is widely used to manufacture parts in automotive industry. This paper presents bending and forming results to following angle of weld line positions. These compare to good bending, bad bending and without weld line model case. And then this result of after forming compare to each forming cases. The purpose of this paper is found that adaptive weld line position for bended final shape.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1084-1089
• /
• 1992

Process planning is a key feature that an intelligent CAD/CAM system should possess. In this paper, we address the problem of determinig process configuration to manufacture the free surfaces. For analyzing the surface, the method of surface subdivision is used. The developed algorithm evaluates the processability of the given surface by applying the three/four/five-axes procedures sequentially. To illustrate and test the developed algorithm, numerical simulations are presented.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 추계공동학술대회
• /
• pp.201-205
• /
• 2006

By analysis of the processes before and after applying RFID in warehouse management and the improvement the RFID system brings to warehouse management based on model of warehouse management in manufacture enterprises, a set of standard process after applying RFID system in SCM members at different phases is designed in this paper.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.358-361
• /
• 2009

The increasing interest in the surface modification technology by the plasma transferred arc overlaying process in the material processing is placing stringent demands on the manufacturing techniques and performance requirements, and the manufacture employs the high quality and efficiency plasma transferred arc overlaying technology. This paper covers recent technical trends of plasma transferred arc overlaying technology including the COMPENDEX DB analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.161-165
• /
• 1996

Recently, with a great interest in micromachine, it is more and more important to promote the way of manufacturing micromachine. The silicon process or the LIGA process was the main way to manufacture micromachine in the past. Because these processing method was 2.5-dimensional, there was the limit in processing perfect three-dimensional micromachine. In this study, we developed the rapid prototyping system for micromachine and tested its property. We also realized .mu. m - order processing and three-dimensional structure processing. The results showed the possibility of manufacturing micromachine with the rapid prototyping system

• Design & Manufacturing
• /
• 제9권3호
• /
• pp.34-40
• /
• 2015

In the study, Three-dimensional drawing parts for conformal cooling circuit cavity & core and their 3D Metal parts using DMLS(Direct MetalLaser Sintering) and NC integrated machining center were showned. For conformal cooling circuit cavity and core parts, I discussed its practicality to DMLS multiple machinins process introducing general manufacturing process and comparing with them.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1164-1167
• /
• 2003

Recently CRT is getting flatted, As change of CRT trend from normal type to Flat type, the material of Shadow Mask was also changed from AK(Aluminum Killed) to Invar(Fe-Ni alloy) materials Until now we have used just AK(Aluminum Killed) for normal type TV(not flat type), but main raw material of shadow mask component was changed. . However recently Invar(Fe-Ni alloy) materials, which has advantage of Low Thermal Expansion and High Strength, has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. As main raw material of shadow mask component was changed, conditions of process were changed. One of them, the importance of pre-etching process (assistant process for developing & etching) is improved because there are so many particles in the pre-etching bath because of Ni compounds. Since the solubility of Ni in pre-etching solvent is very low related to Fe's, so the compounds of Ni happen to make particles.(the solubility of Fe is twenty times Ni's) that particles happen to make process troubles and NG productions so to clear the particles we had to established high cost filtering system, but it is useless. As time goes by the quantity of particles (Ni compounds) was increased because of the capability of filtering system was not enough, the particles was produced continuous in bath, and it make quality problems. Hence we tried to develop the new pre-etching solution to remove the particles (Ni compounds) and to cost down the filtering system's running cost. But in improving the solution we discovered the new pre-etching solution made the PR developing better. In former solution there were three kinds of chemistry (COOH)2 , H2O2 , H2S04 .first the function of (COOH)2 is drilling the surface of Invar, during this mechanism Ni compounds occurred. Second the function of H202 is removing the PR fringe (half UV exposure zone on PR(PVA)), Third the function of H2S04 is the catalysis of (COOH)2 In those, (COOH)2 was the main reason to make the Ni compounds. So to improve the solutions we had to change (COOH)2 to the other material. the chemistry we improved was a complex chemistry based on H2S04 . after using this chemistry the particles problem was disappeared and there was another advantage cut down the PR fringe. The New solution made the function of H202 better so the PR developing improved. To be direct the catalyst of the new solution helped the H202. anyway First thing after change the solution the quality of shadow Mask for flat color TV was improved & the yield also improved. But the more important thing is how to control the new solution. So we accepted the new concept which was the degree of freshness. The degree of freshness is based on non-reacted solution which was 100% ( the degree of freshness) and calculated the melted Ni quantity as time goes by. So we made the gauging liner plot. In conclusion, many companies tried to make fine pitched Shadow Mask ,generally to make quality jump up it needed a lot of cost & persons .in this case the shift of core material made it possible.

• 한국재료학회지
• /
• 제32권7호
• /
• pp.326-331
• /
• 2022

AZ31 magnesium alloy was used to manufacture a thin plate using a melt drag method. The effects of roll speed, molten metal temperature, and molten metal height, which are the basic factors of the melt drag method, on the surface shape, the thickness of the thin plate, Vickers hardness, and microstructure of the thin plate were investigated. It was possible to manufacture AZ31 magnesium alloy thin plate at the roll speed range of 1 to 90 m/min. The thickness of the thin plate, manufactured while changing only the roll speed, was about 1.8 to 8.8 mm. The shape of the solidified roll surface was affected by two conditions, the roll speed and the molten metal height, and the Vickers hardness of the manufactured magnesium alloy thin plate value ranged from Hv38~Hv60. The microstructure of the thin plate produced by this process was an equiaxed crystal and showed a uniform grain size distribution. The grain size was greatly affected by the contact state between the molten metal and the solidification roll, and the amount of reactive solids and liquids scraped at the same time as the thin plate. The average grain size of the thin plate fabricated in the range of these experimental conditions changed to about 50-300 ㎛.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.73-82
• /
• 2004

A thermal transfer method was developed novel method to form the phosphor screen for monochrom VPT. This method have advantages of simple process, clean environment, saving raw material and running-cost. But now applying phosphor screen for thermal transfer method has been formed three layers (phosphor layer, ITO layer and thermal adhesive layer) on the PET film as substrate. This is complex process, consumption of raw-material and require of high cost. Also ITO paste at present has been imported from Japan. To improve these problems, we have developed ITO paste as conductive paste by using ITO sol and binder resin (AA3003). Ito paste as developed in this study has both conductive and excellent thermal transfer abilities. Thus we could manufacture phosphor screen formed two layers (phosphor layer and ITO layer).