• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.799-818
• /
• 2014

Spectrum sensing is a key technical challenge for cognitive radio (CR). It is well known that multi-cycle cyclostationarity (MC) detector is a powerful method for spectrum sensing. However, conventional MC detector is difficult to implement due to its high computational complexity. This paper pays attention to the fact that the computation complexity can be reduced by simplifying the test statistic of conventional MC detector. Based on this simplification process, an improved MC detector is proposed. Compared with the conventional one, the proposed detector has the low-computational complexity and sufficient-accuracy on sensing performance. Subsequently, the sensing performances are further investigated for the cases of Rayleigh, Nakagami-m, Rician, composite Rayleigh fading-lognormal shadowing and composite Nakagami fading-lognormal shadowing channels, respectively. Furthermore, the square-law combining (SLC) is introduced to improve the detection capability over fading-shadowing channels. The corresponding closed-form expressions of average detection probability are derived for each case by the moment generation function (MGF) approach. Finally, illustrative and analytical results show that the efficiency and reliability of proposed detector and the improvement on sensing performance by SLC over composite fading-shadowing channels.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.3
• /
• pp.537-547
• /
• 2001

The paper proposes the fuzzy logic global approximate optimization strategies in optimal sizing of automotive A-pillar trim with rib structures for occupant head protection. Two different strategies referred to as evolutionary fuzzy modeling (EFM) and neuro-fuzzy modeling (NFM) are implemented in the context of global approximate optimization. EFM and NFM are based on soft computing paradigms utilizing fuzzy systems, neural networks and evolutionary computing techniques. Such approximation methods may have their promising characteristics in a case where the inherent nonlinearity in analysis model should be accommodated over the entire design space and the training data is not sufficiently provided. The objective of structural design is to determine the dimensions of rib in A-pillar, minimizing the equivalent head injury criterion HIC(d). The paper describes the head-form modeling and head impact simulation using LS-DYNA3D, and the approximation procedures including fuzzy rule generation, membership function selection and inference process for EFM and NFM, and subsequently presents their generalization capabilities in terms of number of fuzzy rules and training data.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.561-565
• /
• 2014

Thermoelectric materials have been the topic of intensive research due to their unique dual capability of directly converting heat into electricity or electrical power into cooling or heating. Bismuth telluride ($Bi_2Te_3$) is the best-known commercially used thermoelectric material in the bulk form for cooling and power generation applications In this work we focus on the large scale synthesis of nanostructured undoped bulk nanostructured $Bi_2Te_3$ materials by employing a novel bottom-up solution-based chemical approach. Spark plasma sintering has been employed for compaction and sintering of $Bi_2Te_3$ nanopowders, resulting in relative density of $g{\cdot}cm^{-3}$ while preserving the nanostructure. The average grain size of the final compacts was obtained as 200 nm after sintering. An improved NS bulk undoped $Bi_2Te_3$ is achieved with sintered at $400^{\circ}C$ for 4 min holding time.

• Journal of the Korea Concrete Institute
• /
• v.28 no.5
• /
• pp.601-609
• /
• 2016

Recently, extreme climate change has been occurring globally not only in the simple form of temperature increases but also in a wide range of extreme climatic events, such as abnormal drought conditions and frequent typhoons. In addition, climate change is delaying the construction period of concrete structures, increasing related economic losses. Forcing construction projects for completion without considering climate change is leading to concrete quality deterioration, poor quality constructions, and consequent casualties and property damage. Therefore, to address these problems and provide a countermeasure to climate change, the present study selected wind speed, and sunlight exposure time as the most important curing conditions among the climate factors affecting concrete structures and examined their effects on the curing and durability of concrete structures. In addition, for the analysis of the experimental results, this study proposed a process of performance based evaluation (PBE) of concrete strength and durability using a method of Satisfaction Curve (SC) generation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.3
• /
• pp.101-122
• /
• 1999

The history of make-up can go back to the beginning of human being and it can’t be separated from women’s life. The change of history and women's position have given make-up different form and meanings. So make-up becomes another text which can read social·cultural specialty. This study has tried to find out make-up as women culture for women have experienced make-up in a specific situation for a long time and a suit of make-up experience from self-retrospect and made an open channel for women and this paper checked out the possibility of alternative make-up culture. This research used new audience theory of cultural studies which is used for communication study and studied active meaning-construction process and its resistance pleasure. This study saw women as independent subjects not passive victims and how make-up has been different meanings in women’s life. And what pleasure is made and how the way of resistance made constructed in the regulation of make-up.

• Journal of The Korean Astronomical Society
• /
• v.50 no.3
• /
• pp.51-59
• /
• 2017

The presence of blue stragglers pose challenges to standard stellar evolution theory, in the sense that explaining their presence demands a complex interplay between stellar evolution and cluster dynamics. In the meantime, mass transfer in binary systems and stellar collisions are widely studied as a blue straggler formation channel. We explore properties of the Galactic open clusters where blue stragglers are found, in attempting to estimate the relative importance of these two favored processes, by comparing them with those resulting from open clusters in which blue stragglers are absent as of now. Unlike previous studies which require a sophisticated process in understanding the implication of the results, this approach is straightforward and has resulted in a supplementary supporting evidence for the current view on the blue straggler formation mechanism. Our main findings are as follows: (1) Open clusters in which blue stragglers are present have a broader distribution with respect to the Z-axis pointing towards the North Galactic Pole than those in which blue stragglers are absent. The probability that two distributions with respect to the Z-axis are drawn from the same distribution is 0.2%. (2) Average values of $log_10(t)$ of the clusters with blue stragglers and those without blue stragglers are $8.58{\pm}0.232$ and $7.52{\pm}0.285$, respectively. (3) The clusters with blue stragglers tend to be relatively redder than the others, and are distributed broader in colors. (4) The clusters with blue stragglers are likely brighter than those without blue stragglers. (5) Finally, blue stragglers seem to form in condensed clusters rather than simply dense clusters. Hence, we conclude that mass transfer in binaries seems to be a relatively important physical mechanism of the generation of blue stragglers in open clusters, provided they are sufficiently old.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.6
• /
• pp.511-518
• /
• 2013

Steam Generator (SG) tube, as a barrier isolating the primary coolant system from the secondary side of nuclear power plants (NPP), must maintain the structural integrity for the public safety and their efficient power generation. So, SG tubes are subject to the periodic examination and the repairs if needed so that any defective tubes are not in service. Recently, corrosion related degradations were detected in the tubes of the domestic OPR-1000 NPP, as a form of axially oriented outer diameter stress corrosion cracking (ODSCC). According to the studies on the factors causing the heat fouling as well as developing corrosion cracking, densely scaled deposits on the secondary side of the SG tubes are mainly known to be problematic causing the adverse impacts against the soundness of the SG tubes [1]. Therefore, the processes of various cleaning methods efficiently to dissolve and remove the deposits have been applied as well as it is imperative to maintain the structural integrity of the tubes after exposing to the cleaning agent. So qualification test (QT) should be carried out to assess the perfection of the chemical cleaning and QT is to apply the processes and to do ECT. In this paper, the chemical cleaning processes to dissolve and remove the scaled deposits are introduced and results of ECT on the artificial crack specimens to determine the effectiveness of those processes are represented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.615-621
• /
• 2007

Wind power generation is one of the promising gateways that will solve the energy crisis in the future. The wind power generator studied so far is limited to static interpretation in the areas related to tower. This study broadly sets the form of tower as tubular and jacket, identifies the characteristics of each and aims to find and apply their trend to in actual design and manufacturing process. This paper identified the resonance frequency of tower at each mode and studied their features. Furthermore, this study identified the characteristics of the load that occurs in operation and the effect of additional mass incurring when installed in sea, and it compared the two types of tower and was able to predict their trend.

• Journal of Arbitration Studies
• /
• v.15 no.3
• /
• pp.233-266
• /
• 2005

The world trading system has been under many changes in recent years. One notably important development is that much attention away from the multilateralism-oriented World Trade Organization towards FTA(Free Trade Agreement). The Free Trade Agreement signed between korea and chile formally have been come effective for free trade in goods and services as from April 1, 2004. During Free Trade Agreement negotiations between both countries. This study aims at presenting the suggestion for the Korea to make the WTO rules and FTA by analyzing The interpretation of FTA under WTO System. It was founded by the investigation of WTO rules, most of the provisions are similar with other FTA, but a little provisions different from other FTA's. It is an appearance from the contracting party's peculiar circumstances such as state of industrial development or future prospect, conditions around international trade. The whole world has entered the new stage of bilateral and multilateral FTA. The essential or new generation or bilateral and multilateral FTA is creating more trade opportunities, promoting all factors, commodity, service, capital, technology and talent freely flow through canceling the trade barriers between FTA, in order to develop together within the regions. It shows that the cooperations transfer form the whole region into FTA. FTA makes not only the free trade smooth ,but also takes place the trade distortion effect. especially as the agriculture has a speciality each country, should it is ignored in negotiation, many reactions will be occurred in the process of fta Therefore Korea needs to deliver the message that Korea's hub is an essential ingredient for an efficient FTA and WTO system in a bilateral and multilateral win-win framework. Consequently Korea should have criterions about the rules of FTA and WTO system for peculiar circumstances of Korean economy and international trade.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.25-31
• /
• 2023

The brain-machine interface(BMI) is a next-generation interface that controls the device by decoding brain waves(also called Electroencephalogram, EEG), EEG is a electrical signal of nerve cell generated when the BMI user thinks of a command. The brain-machine interface can be applied to various smart devices, but complex computational process is required to decode the brain wave signal. Therefore, it is difficult to implement a brain-machine interface in an embedded system implemented in the form of an edge device. In this study, we proposed a new type of brain-machine interface system using IoT technology that only measures EEG at the edge device and stores and analyzes EEG data in the cloud computing. This system successfully performed quantitative EEG analysis for the brain-machine interface, and the whole data transmission time also showed a capable level of real-time processing.