• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.241-241
• /
• 2008

Macrofore formation in silicon and other semiconductors using electrochemical etching processes has been, in the last years, a subject of great attention of both theory and practice. Its first reason of concern is new areas of macropore silicone applications arising from microelectromechanical systems processing (MEMS), membrane techniques, solar cells, sensors, photonic crystals, and new technologies like a silicon-on-nothing (SON) technology. Its formation mechanism with a rich variety of controllable microstructures and their many potential applications have been studied extensively recently. Porous silicon is formed by anodic etching of crystalline silicon in hydrofluoric acid. During the etching process holes are required to enable the dissolution of the silicon anode. For p-type silicon, holes are the majority charge carriers, therefore porous silicon can be formed under the action of a positive bias on the silicon anode. For n-type silicon, holes to dissolve silicon is supplied by illuminating n-type silicon with above-band-gap light which allows sufficient generation of holes. To make a desired three-dimensional nano- or micro-structures, pre-structuring the masked surface in KOH solution to form a periodic array of etch pits before electrochemical etching. Due to enhanced electric field, the holes are efficiently collected at the pore tips for etching. The depletion of holes in the space charge region prevents silicon dissolution at the sidewalls, enabling anisotropic etching for the trenches. This is correct theoretical explanation for n-type Si etching. However, there are a few experimental repors in p-type silicon, while a number of theoretical models have been worked out to explain experimental dependence observed. To perform ordered macrofore formaion for p-type silicon, various kinds of mask patterns to make initial KOH etch pits were used. In order to understand the roles played by the kinds of etching solution in the formation of pillar arrays, we have undertaken a systematic study of the solvent effects in mixtures of HF, N-dimethylformamide (DMF), iso-propanol, and mixtures of HF with water on the macrofore structure formation on monocrystalline p-type silicon with a resistivity varying between 10 ~ 0.01 $\Omega$ cm. The etching solution including the iso-propanol produced a best three dimensional pillar structures. The experimental results are discussed on the base of Lehmann's comprehensive model based on SCR width.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.455-458
• /
• 2013

The conventional design of the information system architecture based on the personal experience of information systems has been acted as a limit in progress utilizing appropriate resource allocation and performance improvements. Architecture design depending on personal experience makes differences in variance of a designer's experience, intellectual level in related tasks and surroundings, and architecture quality according to individual's propensity. After all these problems cause a waste of expensive hardware resources. At working place, post-monitoring tools are diversely developed and are running to find the bottleneck and the process problems in the information operation. However, there are no simulation tools or models that are used for expecting and counteracting the problems at early period of designing architecture. To solve these problems we will first develop a simulation model for designing information system architecture in a pilot form, and will verify validity. If an error rate is found in the permissible range, then it can be said that the simulation reflects the characteristic of information system architecture. After the model is developed in a level that can be used in various ways, more accurate performance computation will be able to do, getting out of the old way relying on calculations, and prevent the existence of idle resources and expense waste that comes from the wrong design of architecture.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.1
• /
• pp.19-30
• /
• 2014

For the expansion of the Semantic Web, studies in converting the data stored in the relational database into the ontology are actively in process. Such studies mainly use an RDB to RDF mapping model, the model to map relational database components to RDF components. However, pre-proposed mapping models have got different expression modes and these damage the accessibility and reusability of the users. As a consequence, the necessity of the standardized mapping language was raised and the W3C suggested the R2RML as the standard mapping language for the RDB to RDF model. The R2RML has a characteristic that converts only the relational database schema data to RDF. For the same reasons above, the ontology about the relation data between table name and column name of the relational database cannot be added. In this paper, we propose an RDB to RDF mapping system considering semantic relations of RDB components in order to solve the above issue. The proposed system generates the mapping data by adding the RDFS attribute data into the schema data defined by the R2RML in the relational database. This mapping data converts the data stored in the relational database into RDF which includes the RDFS attribute data. In this paper, we implement the proposed system as a Java-based prototype, perform the experiment which converts the data stored in the relational database into RDF for the comparison evaluation purpose and compare the results against D2RQ, RDBToOnto and Morph. The proposed system expresses semantic relations which has richer converted ontology than any other studies and shows the best performance in data conversion time.

• Management & Information Systems Review
• /
• v.39 no.3
• /
• pp.17-35
• /
• 2020

The purpose of this study is to develop business models for current situational scenarios reflecting customer needs emphasize the need for implementing a logistics cooperation system by analyzing big data to strengthen SCM competitiveness capacities. For healthcare SCM competitiveness needed for the logistics cooperation usage intent, they were divided into product quality, price leadership, hand-over speed, and process flexibility for examination. The wordcloud results that analyzed major considerations to realize work efficiency between medical institutes, words like unexpected situations, information sharing, delivery, real-time, delivery, convenience, etc. were mentioned frequently. It can be analyzed as expressing the need to construct a system that can immediately respond to emergency situations on the weekends. Furthermore, in addition to pursuing communication and convenience, the importance of real-time information sharing that can share to the efficiency of inventory management were evident. Accordingly, it is judged that it is necessary to aim for a business model that can enhance visibility of the logistics pipeline in real-time using big data analysis on site. By analyzing the effects of the adaptability of a supply chain network for healthcare SCM competitiveness, it was revealed that obtaining competitive capacities is possible through the implementation of logistics cooperation. Stronger partnerships such as logistics cooperation will lead to SCM competitive capacities. It will be necessary to strengthen SCM competitiveness by searching for a strategic approach among companies in a direction that can promote mutual partnerships among companies using the joint logistics system of medical institutes. In particular, it will be necessary to search for ways to utilize HCSM through big data analysis according to the construction of a logistics cooperation system.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.365-373
• /
• 2006

With a few exceptions, Korean lakes are artificially constructed for multi-purposes throughout the country. In the majority of cases, a lake is in a multiple series of reservoirs along a river or is an estuary Moreover, nutrient supplying activities (including sand extraction) and biomanipulation(esp., overfishing and fish introduction) are omnipresent in most cases. Furthermore, there is an Asian monsoon every year. In brief, europhication and algal blooms break out as a result of complicated causes. However limnological monitoring and scientific working programs are in the course of beginning. The question is what kind of strategy is desirable to establish a solid limnological database for the efficiency of the restoration process in each Korean reservoir We present light monitoring cases on the basis of algal and some physicochemical data in 2005. Do they give some useful informations despite their simplicity. Based on physicochemical factors and phytoplankton data using Utermohl method and Canonical Correspondence Analysis(CCA) were performed for Lake Cheongpyeong, Lake ASan, Lake Namyang, and Lake SapGyo. The results of CCA showed that Lake Cheongpyeong was different from the other three Lakes at estuary. Also each Lake at estuary was slightly different from one other. This result would encourage to initiate building an adequate Korean reservoir-ecosystem understanding and models for better ecological management despite the limited data. However, the results also indicate to sustain collecting ecological data and building database to interpret the Korean ecological reservoir model.

• Ocean Systems Engineering
• /
• v.6 no.1
• /
• pp.23-60
• /
• 2016

The major objective of this study was to develop further understanding of 3D nearshore hydrodynamics under a variety of wave and tidal forcing conditions. The main tool used was a comprehensive 3D numerical model - combining the flow module of Delft3D with the WAVE solver of XBeach - of nearshore hydro- and morphodynamics that can simulate flow, sediment transport, and morphological evolution. Surf-swash zone hydrodynamics were modeled using the 3D Navier-Stokes equations, combined with various turbulence models (${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES). Sediment transport and resulting foreshore profile changes were approximated using different sediment transport relations that consider both bed- and suspended-load transport of non-cohesive sediments. The numerical set-up was tested against field data, with good agreement found. Different numerical experiments under a range of bed characteristics and incident wave and tidal conditions were run to test the model's capability to reproduce 3D flow, wave propagation, sediment transport and morphodynamics in the nearshore at the field scale. The results were interpreted according to existing understanding of surf and swash zone processes. Our numerical experiments confirm that the angle between the crest line of the approaching wave and the shoreline defines the direction and strength of the longshore current, while the longshore current velocity varies across the nearshore zone. The model simulates the undertow, hydraulic cell and rip-current patterns generated by radiation stresses and longshore variability in wave heights. Numerical results show that a non-uniform seabed is crucial for generation of rip currents in the nearshore (when bed slope is uniform, rips are not generated). Increasing the wave height increases the peaks of eddy viscosity and TKE (turbulent kinetic energy), while increasing the tidal amplitude reduces these peaks. Wave and tide interaction has most striking effects on the foreshore profile with the formation of the intertidal bar. High values of eddy viscosity, TKE and wave set-up are spread offshore for coarser grain sizes. Beach profile steepness modifies the nearshore circulation pattern, significantly enhancing the vertical component of the flow. The local recirculation within the longshore current in the inshore region causes a transient offshore shift and strengthening of the longshore current. Overall, the analysis shows that, with reasonable hypotheses, it is possible to simulate the nearshore hydrodynamics subjected to oceanic forcing, consistent with existing understanding of this area. Part II of this work presents 3D nearshore morphodynamics induced by the tides and waves.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.526-534
• /
• 2011

In this study, proposed is the methodology to determine the upper limit for stiffness of rail pad for the ballasted and concrete track in high-speed railway in the viewpoint of running safety, considering the dynamic characteristics of train and track and the operation environment. For the track irregularity, one of the most important input parameters for traintrack interaction analysis, the reference vertical track irregularity PSDs(power spectral densities) for the ballasted and concrete track in a wide range of frequencies were proposed based on those presented in France and Germany and that obtained from the measured data at Kyeong-Bu 1st phase high-speed railway line. Using these reference PSD models, the input data for the vertical track irregularity data were regenerated by random generation process, and then, the wheel load reduction rates according to the stiffness of the rail pads have been calculated by the train-track interaction analysis technique. Finally, by comparing the wheel load reduction rates calculated with the derailment criteria prescribed in the Korean standards for railway vehicle safety criteria, the upper limits for the stiffness of rail pad have been proposed.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.696-703
• /
• 2016

The purpose of this study was to determine the optimum re-extraction conditions of ethanol from catechin in Korean green tea (Camellia sinensis L.) using response surface methodology (RSM). The experiments were carried out according to a five level and two variable central composite design (CCD). The two independent variables were solvent ratio to sample content (1, 4, 7, 10, 13 mL/g) and extraction temperature (-20, -10, 0, 10, $20^{\circ}C$) on the dependent variables including yield, epigallocatechin (EGC), epicathchin (EC), epigallocatechingallate (EGCG), epicatechingallate (ECG), total catechin and caffeine. ANOVA results showed that Coefficients of determination ($R^2$) of estimated models for dependent variables were ranged from 0.9054~0.9778, while $R^2$ of caffeine were estimated 0.8770. The optimum ranges for the maximized extraction including yield, EGC, EC, EGCG, ECG, caffeine and total catechin were 4.5~7.5 mL/g in ratio of ethanol to sample and $-8{\sim}8^{\circ}C$ in extraction temperature. The actual values of yield, EGC, EC, EGCG, ECG, caffeine and total catechin, respectively, at the optimized conditions were 35.02%, 13.31%, 3.978%, 19.11%, 4.29%, 5.30% and 40.68%.

• YAKHAK HOEJI
• /
• v.41 no.6
• /
• pp.737-748
• /
• 1997

Distribution of rhEGF in the skin, plasma and several organ tissues following topical application of $^{125}I-rhEGF$ (0.4${\mu}$Ci) solution in 25% Pluronic F-127 on 154$mm^2$ normal and damaged (burned and stripped) skins of hairless mice was examined. The radioactivity in the stripped skin tissues increased as a function of time, and was 10-20 times higher than that in the normal and burned skins. The fractions of intact drug in the skin tissues were 40-60% for the normal and burned skins, and 60-80% for the stripped skin. It indicates that the stratum corneum layer behaves as a barrier for the dermal penetration of the drug. The radioactivity in the plasma was much higher for the stripped skin than for the normal and burned skins. However, the concentration of intact drug in the stripped skin was comparable to those in the normal and burned skins indicating most severe degradation (or metabolism) of the drug in the stripped skin. As a result, the fraction of intact drug in the plasma was lowest for the stripped skin (<10%). Body organ distribution of the drug was much higher for the stripped skin. The concentration in the stomach. Both in total radioactivity and intact drug, showed more than 10-times higher value than in the other organs (liver, kidney and spleen). The fraction of intact drug in each organ tissue was below 10-20%. And generally lowest for the stripped skin. The lowest fraction of the drug for the stripped skin could not be explained by the activity of the aminopeptidases in the skin since it was lower for the stripped skin than for the normal skin. Thereover, the fraction of intact drug appears to be determined by the balance between dermal uptake and systemic elimination of the drug, for example. The mechanism of dermal uptake of rhEGF was examined by topical applying 200${\mu}$l of 25% Pluronic F-127 solution containing 0.4 ${\mu}$Ci of $^{125}I-rhEGF$ and 0.14${\mu}$Ci of $^{14}C$-inulin (a marker of passive diffusion). The radioactivity of $^{125}I-rhEGF$ at each sampling time point (0.5, 1, 2, 4 and 8hr) was correlated (p<0.05) with the corresponding radioactivity of $^{14}C$-inulin. It appears to indicate the rhEGF may be uptaken into the skins mainly by the passive diffusion. This hypothesis was supported by the constant specific binding of EGF to the skin homogenates regardless of the skin models. Receptor mediated endocytosis (RME) appears to contribute negligibly, if any, to the overall uptake process.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.5 no.4
• /
• pp.39-49
• /
• 2017

Purpose - This study is to propose a creative idea for constant business growth and development by examining characteristics of business outcomes by phase, which are "growth" and "erosion and stagnation," respectively. Research design, data, methodology - It is necessary to identify an occurrence of crisis and its diffusion with a dynamic model in order to identify a success and failure of businesses in an organic way, not on a binary structure. The static perspective is to understand a crisis as a simply one-time event or as a linear causation. Thus, it has a limited understanding of the overall situation and has limits to investigating a foundational cause and developing long-term countermeasures. On the contrary, the dynamic perspective is to understand the crisis as circulation process of the overall system. Thus, it divides elements of the crisis as external and internal ones to understand it as the causal relationship of each element. Results - During the growth period of Burger King, the company promoted its brand very successfully with aggressive and creative marketing activities. However, due to the founder's disposal of management rights and the following changes in the management, the company had no choice but to lose focus on its business philosophy and brand management, and eventually it had to face the big crisis (resonance) which was delisting from the stock market because of the external threat; well-being trend. However, Burger King resumed lifting on the stock exchange by making great efforts to clearly identify the current issues and seek solutions. Under the spirit of "perseverance" and its slogan "Have it your way" the company is now going head to head with McDonald's in the North American region and emerging countries. Conclusions - Then, what is the most crucial factor in the success and failure of businesses? Answers may vary, however, as learned from the case study of Burger King, corporations should inspect the present and focus on developing a long-term strategy for the future and actively fulfill the actions. McDonald's may not be able to innovate by itself in the future as it may become routinized to the growth. There will be chances of winning if we change conditions of individuals or organizations to an organic system in terms of being creative. There is a hopeful message here that an individual or small business may have more advantages in the era of the idea and innovation.