• International journal of advanced smart convergence
• /
• v.13 no.1
• /
• pp.212-220
• /
• 2024

When a typhoon or natural disaster occurs, a significant number of orchard fruits fall. This has a great impact on the income of farmers. In this paper, we introduce an AI-based method to enhance low-quality raw images. Specifically, we focus on apple images, which are being used as AI training data. In this paper, we utilize both a basic program and an artificial intelligence model to conduct a general image process that determines the number of apples in an apple tree image. Our objective is to evaluate high and low performance based on the close proximity of the result to the actual number. The artificial intelligence models utilized in this study include the Convolutional Neural Network (CNN), VGG16, and RandomForest models, as well as a model utilizing traditional image processing techniques. The study found that 49 red apple fruits out of a total of 87 were identified in the apple tree image, resulting in a 62% hit rate after the general image process. The VGG16 model identified 61, corresponding to 88%, while the RandomForest model identified 32, corresponding to 83%. The CNN model identified 54, resulting in a 95% confirmation rate. Therefore, we aim to select an artificial intelligence model with outstanding performance and use a real-time object separation method employing artificial function and image processing techniques to identify orchard fruits. This application can notably enhance the income and convenience of orchard farmers.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.889-896
• /
• 2012

In this study, simulation results of nitrogen and phosphorus removals and microbial activities for an $A_2O$ process in wastewater treatment plant are presented by using Activated Sludge Models (ASMs). Simulations were performed using pre-calibrated model and layout implemented in GPS-X simulation software. The models were used to investigate variations of SRT, water temperature, DO and C/N ratio effect on nutrients removal and microbial activity. According to the simulated results, the successful nitrification required SRT higher than 10.3 days, whereas increase of $NO_3$-N loading in the anaerobic reactor caused phosphorus release by PAOs; the effluent $NH_4$-N showed rapid change between $12^{\circ}C$(21.7 mg/L) and $13^{\circ}C$(3.2 mg/L); the effluent phosphorus was increased up to 1.9 mg/L at water temperature of $25^{\circ}C$; the DO increase was positive for heterotrophs and autotrophs growths but negative for PAOs growth; the PAOs showed low activity when C/N ratio was lower than 2.5. The experimental results indicated that the calibrated models can assure the prediction quality of the ASMs and can be used to optimize the $A_2O$ process.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.61-69
• /
• 2008

In order to evaluate the performance of priority queues for future event list in discrete-event simulations, models representing patterns of enqueue and dequeue processes are required. The time complexities of diverse priority queue implementations can be compared using the performance models. This study aims at developing such performance models especially under the environment that a developed simulation model is used repeatedly for a long period. The developed performance model is based on multi-stage Markov process models; probabilistic patterns of enqueue and dequeue are considered by incorporating non-homogeneous transition probability. All necessary parameters in this performance model would be estimated by analyzing a results obtained by executing the simulation model. A case study with a war game simulation model shows how the parameters defined in muti-stage Markov process models are estimated.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.191-203
• /
• 2009

To provide dynamic services for users in ubiquitous computing environments by considering context in real-time, in our previous work we proposed Metaservice concept, the description specification and the process for building a Metaservice library. However, our previous process generates separated models - UML, OWL, OWL-S based models - from each step, so it did not provide the established method for translation between models. Moreover, it premises aid of experts in various ontology languages, ontology editing tools and the proposed Metaservice specification. In this paper, we design the translation process from domain ontology in OWL to Metaservice Library in OWL-S and develop a visual tool in order to enable non-experts to generate consistent models and to construct a Metaservice library. The purpose of the Metaservice Library translation process is to maintain consistency in all models and to automatically generate OWL-S code for Metaservice library by integrating existing OWL model and Metaservice model.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.70-75
• /
• 1993

We represent a method of 3-D object recognition using multi images in this paper. The recognition process is executed as follows. Object models as prior knowledgement are generated and stored on a computer. To extract features of a recognized object, three CCD cameras are set at vertices of a regular triangle and take images of an object to be recognized. By comparing extracted features with generated models, the object is recognized. In general, it is difficult to recognize 3-D objects because there are the following problems such as how to make the correspondence to both stereo images, generate and store an object model according to a recognition process, and effectively collate information gotten from input images. We resolve these problems using the method that the collation on the basis of features independent on the viewpoint, the generation of object models as enumerating some candidate models in an early recognition level, the execution a tight cooperative process among results gained by analyzing each image. We have made experiments based on real images in which polyhedral objects are used as objects to be recognized. Some of results reveal the usefulness of the proposed method.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.10a
• /
• pp.134-152
• /
• 1993

Many business forecasting problems are characterized by infrequent occurences, a large number of variables, presence of error, and great complexity. Because no forecasting models and tools are effective in handing these problems, managers often use the outcomes of past analogous cases to predict the outcome of the current one. They (1) observe significant attributes in describing a case, (2) identify the past cases similar in these attributes to the current case, and (3) predict the outcome of the current case based on those of the analogous cases identified through some mental simulation and adjustment. This process of forecasting can be termed forecasting-by-analogy. In spite of fairly frequent use of this forecasting process in practice, however, if has not been recognized as a primary forecasting tool, nor applied on a regular basis. In this paper, by automatizing this process using computer models, we develop a case-based forecasting system(CBFS), which identifies relevant cases and applies their outcomes to generate a forecast. We demonstrate the effectiveness of the CBFS in terms of its accuracy in predicting the outcome of the current problem based on the similar cases identified. We compare the forecasting accuracy of the CBFS with that of regression models developed by stepwise procedure under varied simulated problem conditions. The CBFS outperforms regression models in most comparisons. The CBFS could be used as an effective forecasting tool.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.2
• /
• pp.199-215
• /
• 1994

Many business forecasting problems are characterized by infrequent occurrences, a large number of variables, presence of error, and great complexity. Because no forecasting models and tools are effective in handing these problems, managers often use the outcomes of past analogous cases to predict the outcome of the current one. They (1) observe significant attributes in describing a case, (2) identify the past cases similar in these attributes to the current case, and (3) predict the outcome of the current case based on those of the analogous cases identified through some mental simulation and adjustment. This process of forecasting can be termed forecasting-by-analogy. In spite of fairly frequent use of this forecasting process in practice, however, it has not been recognized as a primary forecasting tool, nor applied on a regular basis. In this paper, by automatizing this process using computer models, we develop a case-based forecasting system (CBFS), which identifies relevant cases and applies their coutcomes to generate a forecast. We demonstrate the effectiveness of the CBFS in terms of its accuracy in predicting the outcome of the current problem based on the similar cases identified. We compare the forecasting accuracy of the CBFS with that of regression models developed by stepwise procedure under varied simulated problem conditions. The CBFS outperforms regression models in most comparisons. The CBFS could be used as an effective forecasting tool.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.6
• /
• pp.1518-1539
• /
• 2024

Artificial intelligence-enabled business models aim to improve decision-making, operational efficiency, innovation, and productivity. The presented systematic literature review is conducted to highlight elucidating the utilization of artificial intelligence (AI) methods and techniques within AI-enabled businesses, the significance and functions of AI-enabled organizational models and frameworks, and the design parameters employed in academic research studies within the AI-enabled business domain. We reviewed 39 empirical studies that were published between 2010 and 2023. The studies that were chosen are classified based on the artificial intelligence business technique, empirical research design, and SLR search protocol criteria. According to the findings, machine learning and artificial intelligence were reported as popular methods used for business process modelling in 19% of the studies. Healthcare was the most experimented business domain used for empirical evaluation in 28% of the primary research. The most common reason for using artificial intelligence in businesses was to improve business intelligence. 51% of main studies claimed to have been carried out as experiments. 53% of the research followed experimental guidelines and were repeatable. For the design of business process modelling, eighteen AI mythology were discovered, as well as seven types of AI modelling goals and principles for organisations. For AI-enabled business models, safety, security, and privacy are key concerns in society. The growth of AI is influencing novel forms of business.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.4
• /
• pp.59-78
• /
• 2003

Most regression models of anthropometric variables use stature and/or weight as regressors; however, these 'flat' regression models result in large errors for anthropometric variables having low correlations with the regressors. To develop more accurate regression models for anthropometric variables, this study proposed a method to estimate anthropometric variables in a hierarchical manner based on the relationships among the variables and a process to develop and improve corresponding regression models. By applying the proposed approach, a hierarchical estimation structure was constructed for 59 anthropometric variables selected for the occupant package design of a passenger car and corresponding regression models were developed with the 1988 US Army anthropometric survey data. The hierarchical regression models were compared with the corresponding flat regression models in terms of accuracy. As results, the standard errors of the hierarchical regression models decreased by 28% (4.3mm) on average compared with those of the flat models.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.135-145
• /
• 2011

Accurate process characterization and optimization are the first step for a successful advanced process control (APC), and they should be followed by continuous monitoring and control in order to run manufacturing processes most efficiently. In this paper, process characterization and recipe optimization methods with multiple outputs are presented in high density plasma-chemical vapor deposition (HDP-CVD) silicon dioxide deposition process. Five controllable process variables of Top $SiH_4$, Bottom $SiH_4$, $O_2$, Top RF Power, and Bottom RF Power, and two responses of interest, such as deposition rate and uniformity, are simultaneously considered employing both statistical response surface methodology (RSM) and neural networks (NNs) based genetic algorithm (GA). Statistically, two phases of experimental design was performed, and the established statistical models were optimized using performance index (PI). Artificial intelligently, NN process model with two outputs were established, and recipe synthesis was performed employing GA. Statistical RSM offers minimum numbers of experiment to build regression models and response surface models, but the analysis of the data need to satisfy underlying assumption and statistical data analysis capability. NN based-GA does not require any underlying assumption for data modeling; however, the selection of the input data for the model establishment is important for accurate model construction. Both statistical and artificial intelligent methods suggest competitive characterization and optimization results in HDP-CVD $SiO_2$ deposition process, and the NN based-GA method showed 26% uniformity improvement with 36% less $SiH_4$ gas usage yielding 20.8 ${\AA}/sec$ deposition rate.