• International journal of advanced smart convergence
• /
• 제10권1호
• /
• pp.159-165
• /
• 2021

Electronic devices used in the mobile environments fabricated under the plasma conditions in high vacuum system. Especially for the development of advanced electronic devices, high quality plasma as the process conditions are required. For this purpose, the variable conductance throttle valves for controllable plasma employed to the high vacuum system. In this study, we analyzed the effects of throttle valve applications on vacuum characteristics simulated to obtain the optimum design modelling for plasma conditions of high vacuum system. We used commercial simulator of vacuum system, VacSim(multi) on this study. Reliability of simulator verified by simulation of the commercially available models of high vacuum system. Simulated vacuum characteristics of the proposed modelling agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve schematized as the modelling of throttle valve for the constant process-pressure of below 10-3 torr. Simulation results plotted as pump down curve of chamber, variable valve conductance and conductance logic of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably in plasma process.

• 한국학교수학회논문집
• /
• 제4권2호
• /
• pp.27-32
• /
• 2001

The paper describes some principles how we design the mathematics curriculum through mathematical Modelling. since the motivation for modelling is that it give us a cheap and rapid method of answering illposed problem concerning the real world situations. The experiment was focussed on the possibility that they can involved in modelling problem sets and carry modelling process. The main principles could be described as follows. principle 1. we as a teacher should introduce the modelling problems which have many constraints at the begining situation, but later eliminate those constraints possibly. principle 2. we should avoid the modelling real situations which contain the huge data collection in the classroom, but those could be involved in the mathematics club and job oriented problem solving. principle 3. Analysis of modelling situations should be much emphasized in those process of mathematics curriculum principle 4. As a matter of decision, the teachers should have their own activities that do mathematics curriculum free. principle 5. New strategies appropriate in solving modelling problem could be developed, so that these could contain those of polya's heusistics

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.24-27
• /
• 1995

This paper presents, step-by-step, the capabilities that a general-purpose simulation environment, such as Simulab/Matlab,provides for an intuitive and sfficient modelling of grinding processes. Starting from a revision of the different approaches which can go found in the technical literature the paper begins with the well-known block-diagram forst presented by Snoyes and how the different parameters for the simulation are introduced in the model(machine,grinding wheel and process parameters). Special attention is paid to the fact that nonlinear phenomena can easily be include.

• 소성∙가공
• /
• 제3권1호
• /
• pp.110-119
• /
• 1994

In this paper, a new forming process of large-size forgings of converged nozzle-shape is developed by the experimental study using the incremental forging method and combined forming method. The development of the forming process is focused on the manufacturing of large-size forgings by the press with medium load capacity. Various related processes are proposed and modelling experiments using plasticine are carried out. Thus, the incremental forging method for expanding is recommanded from the study of formability and forming load, etc. The selected process is then subjected to modelling experiments of lead and the design parameters such as preform for final process, die-width of the upper die and reduction amount of each stroke are determined. In order to verify the effectiveness of the selected process, 1/7 scale prototype experiment of the real material is carried out. Forgings of converged nozzle shape can be produced by the developed process within the limit loads and with the simple tools.

• 대한수학교육학회지:학교수학
• /
• 제9권1호
• /
• pp.65-97
• /
• 2007

본 연구에서는 수학적 모델링에 관한 주제로 국내 학회지에 실린 총 11편의 선행 연구 및 22편의 석사학위논문을 대상으로 그 밖의 국내외 문헌을 참조하여 수학적 모델링에 관한 이해를 도모하고자 하였다. 우선, 수학적 모델링의 의미와 과정을 살펴보고, 수학적 모델링과 문제해결의 관계를 살펴보았는데, 그 결과 수학적 모델링의 중요성을 부각시키기 위한 노력 내지 의도 하에 문제해결의 진정한 의미가 다소 축소되고 간과되는 경향이 있음을 알 수 있었다. 이어서 수학적 모델링의 주요 특징을 탐색해 보고, 수학적 모델링 문제와 문제해결에서 정의되는 문제의 관계를 살펴보았는데, 이는 문제해결에서의 수학 외적 소재를 수반하는 문제의 의미 내지 범주가 보다 분명히 밝혀질 때 두 문제 사이의 범주 및 관계도 정립될 수 있을 것으로 나타났다. 결과적으로, 본 연구에서는 문제해결 문제와의 비교를 떠나 수학적 모델링 문제 자체가 지니고 있는 특징을 간추려 제시하였다. 끝으로, 수학적 모델링 과정의 전반적인 이해를 돕기 위하여 폴리아의 문제해결 과정과 연계지어 간략히 제시하였다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.295-300
• /
• 1998

Recently graphical modelling is being studied as a useful process analysis tool for exploratory causal analysis. Graphical modelling is a presentation method that uses graphs to describe statistical models of the structures of multivariate data. This paper describes an application of this graphical modeling with two cases from the automotive parts industry. One case is the unbalance problem of the pulley, an automotive generator part. There is multivariate data of the product from each of the processes which are connected in the series. By means of exploratory causal analysis between the variables using graphical modeling, the key processes which causes the variation of the final characteristics and their mechanism of the causal relationship have become clear. Another case is, also, the unbalanced problem of automotive starter parts which consists of many parts and is manufactured by complex machinery and assembling process. By means of the similar technique, the key processes are obtained easily and the results are reasonable from technical knowledge.

• 한국전자거래학회지
• /
• 제10권1호
• /
• pp.41-60
• /
• 2005

본 논문에서는 국방CALS의 구현을 위한 표준방법론인 ID EF1/1X를 무기체계 연구개발 절차에 적용하여 연구개발 수행과정에서의 연구목표, 정보의 입력, 산출, 제약조건에 대한 정보모델링을 제시하였다. ID EF1/1X를 실행하는 프로그램인 SmartER를 이용하여 연구개발 수행기관 내부에 존재하는 모든 정보자원의 관리에 대한 요구분석을 실시하여 관리해야 할 정보를 식별한 후 TO-BE모델에 대한 정보모델링을 제시한 것이다. ID EF 적용대상인 무기체계 연구개발의 절차는 개념연구, 탐색개발, 체계개발, 그리고 시제품 제작을 거쳐 연구개발 결과 보고서 작성 단계로 구성되어 있다. 본 연구의 정보모델링 결과로 무기체계 통합데이터베이스(IWSDB)를 이용하여 정보를 공유하고 연구개발업무를 수행하는 것을 제시하였다. 무기체계 연구개발사업과 같은 대형 체계개발 사업에 대한 프로세스의 효율성을 기하기 위해서 적절한 방법론으로 알려진 IDEF에 대한 본격적인 연구가 진행되어 국방CALS를 구현하는 계기가 되었으면 한다.

• 한국실내디자인학회논문집
• /
• 제19권1호
• /
• pp.137-147
• /
• 2010

The purpose of this study is to research a method of creating a new type of boundary by repeated disposition of single unit of modularized membrane successively. In the contemporary architectural indoor space, more highly dimensional analysis of boundary is required and the necessity of establishing boundary of a new concept that may satisfy cultural value, social value and artistic value as a whole as well as aesthetic and functional merit has been increased. In order to create a membrane that may fulfil the requirements of the diversified programs of space like this, an approach of complicated mechanism and high-dimensional calculation are required. At this time, digital GA modelling, parametric modelling technique may expand its range of possibility. One thing to be noted at this juncture is that indefinite expandability involved in digital modelling technique, modelling by grid of absolute and relative coordinates and convenience of systematization may surpass limitation of analogue or simple numerical calculation being progressed in the past. And in order to create solid process including unit modelling or pattern formation, Precise calculation process of computer is necessitated inevitably.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.75-82
• /
• 2019

Few studies have been conducted regarding theoretical turning force modelling while considering cutting constant. In this paper, a new cutting force modelling technique was suggested which considers the specific cutting force coefficients for turning. The specific cutting force is the multiplication of the cutting force coefficient and uncut chip thickness. This parameter was used for experimental modelling and prediction of theoretical cutting force. These coefficients, which can be obtained by fitting measured average forces in several conditions, were used for the formulation of three theoretical cutting forces for turning. The cutting force mechanism was verified in this research and its results were compared with each of the experimental and theoretical forces. The deviation of force was incurred by a small amount in this model and the predicted force considering feed rate, nose radius, and radial depth shows a physical behavior in main force, normal force, and feeding force, respectively. Therefore, this modelling technique can be used to effectively predict three turning forces with different tool geometries considering cutting force coefficients.

• Coupled systems mechanics
• /
• 제11권1호
• /
• pp.79-91
• /
• 2022

Models for water treatment processes include simulation, i.e., modelling of water quality, flow hydraulics, process controls and design. Water treatment processes are inherently dynamic because of the large variations in the influent water flow rate, concentration and composition. Moreover, these variations are to a large extent not possible to control. Mathematical models and computer simulations are essential to describe, predict and control the complicated interactions of the water treatment processes. An accurate description of such systems can therefore result in highly complex models, which may not be very useful from a practical, operational point of view. The main objective is to combine knowledge of the process dynamics with mathematical methods for processes estimation and identification. Good modelling practice is way to obtain this objective and to improve water treatment processes(its understanding, design, control and performance- efficiency). By synthesize of existing knowledge and experience on good modelling practices and principles the aim is to help address the critical strategic gaps and weaknessesin water treatment models application.