• International journal of advanced smart convergence
• /
• v.10 no.1
• /
• pp.159-165
• /
• 2021

Electronic devices used in the mobile environments fabricated under the plasma conditions in high vacuum system. Especially for the development of advanced electronic devices, high quality plasma as the process conditions are required. For this purpose, the variable conductance throttle valves for controllable plasma employed to the high vacuum system. In this study, we analyzed the effects of throttle valve applications on vacuum characteristics simulated to obtain the optimum design modelling for plasma conditions of high vacuum system. We used commercial simulator of vacuum system, VacSim(multi) on this study. Reliability of simulator verified by simulation of the commercially available models of high vacuum system. Simulated vacuum characteristics of the proposed modelling agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve schematized as the modelling of throttle valve for the constant process-pressure of below 10-3 torr. Simulation results plotted as pump down curve of chamber, variable valve conductance and conductance logic of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably in plasma process.

• Journal of the Korean School Mathematics Society
• /
• v.4 no.2
• /
• pp.27-32
• /
• 2001

The paper describes some principles how we design the mathematics curriculum through mathematical Modelling. since the motivation for modelling is that it give us a cheap and rapid method of answering illposed problem concerning the real world situations. The experiment was focussed on the possibility that they can involved in modelling problem sets and carry modelling process. The main principles could be described as follows. principle 1. we as a teacher should introduce the modelling problems which have many constraints at the begining situation, but later eliminate those constraints possibly. principle 2. we should avoid the modelling real situations which contain the huge data collection in the classroom, but those could be involved in the mathematics club and job oriented problem solving. principle 3. Analysis of modelling situations should be much emphasized in those process of mathematics curriculum principle 4. As a matter of decision, the teachers should have their own activities that do mathematics curriculum free. principle 5. New strategies appropriate in solving modelling problem could be developed, so that these could contain those of polya's heusistics

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.24-27
• /
• 1995

This paper presents, step-by-step, the capabilities that a general-purpose simulation environment, such as Simulab/Matlab,provides for an intuitive and sfficient modelling of grinding processes. Starting from a revision of the different approaches which can go found in the technical literature the paper begins with the well-known block-diagram forst presented by Snoyes and how the different parameters for the simulation are introduced in the model(machine,grinding wheel and process parameters). Special attention is paid to the fact that nonlinear phenomena can easily be include.

• Transactions of Materials Processing
• /
• v.3 no.1
• /
• pp.110-119
• /
• 1994

In this paper, a new forming process of large-size forgings of converged nozzle-shape is developed by the experimental study using the incremental forging method and combined forming method. The development of the forming process is focused on the manufacturing of large-size forgings by the press with medium load capacity. Various related processes are proposed and modelling experiments using plasticine are carried out. Thus, the incremental forging method for expanding is recommanded from the study of formability and forming load, etc. The selected process is then subjected to modelling experiments of lead and the design parameters such as preform for final process, die-width of the upper die and reduction amount of each stroke are determined. In order to verify the effectiveness of the selected process, 1/7 scale prototype experiment of the real material is carried out. Forgings of converged nozzle shape can be produced by the developed process within the limit loads and with the simple tools.

• School Mathematics
• /
• v.9 no.1
• /
• pp.65-97
• /
• 2007

Problem solving and mathematical applications have been increasingly emphasized in school mathematics over the past ten years. Recently it is recommended that mathematical applications and modeling situations be incorporated into the secondary school curriculum. Many researches on this approach have been conducted in Korea. But unfortunately two thirds of these researches have been studied by graduate students. Therefore, more professional researchers should be concerned with the study related to mathematical modelling activity. This study is planning to investigate and establish i) the concepts and meanings of mathematical model, mathematical modelling, and mathematical modelling process, ii) the properties of problem situations introduced and dealt with in mathematical modelling activity, and iii) relationship between mathematical modelling activity and problem solving activity, and so on. To accomplish this, this study is based on the analysis and comparison of 11 articles published in domestic journals and 22 domestic master papers.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.295-300
• /
• 1998

Recently graphical modelling is being studied as a useful process analysis tool for exploratory causal analysis. Graphical modelling is a presentation method that uses graphs to describe statistical models of the structures of multivariate data. This paper describes an application of this graphical modeling with two cases from the automotive parts industry. One case is the unbalance problem of the pulley, an automotive generator part. There is multivariate data of the product from each of the processes which are connected in the series. By means of exploratory causal analysis between the variables using graphical modeling, the key processes which causes the variation of the final characteristics and their mechanism of the causal relationship have become clear. Another case is, also, the unbalanced problem of automotive starter parts which consists of many parts and is manufactured by complex machinery and assembling process. By means of the similar technique, the key processes are obtained easily and the results are reasonable from technical knowledge.

• The Journal of Society for e-Business Studies
• /
• v.10 no.1
• /
• pp.41-60
• /
• 2005

IDEF(Integrated Definition) method, a standard methodology of CALS process modelling, was applied to the weapon system R&D process to provide information modelling by analysing about goal, input, output and constraints in the R&D process. The information to be managed in R&D institutes was identified by using SmartER which is the automation program of IDEF1/1X and obtained information modelling for TO-BE model. The work process of weapon system R&D consists of the concept study phase, the exploration development phase, the system development phase, the prototype manufacturing phase, and the report writing of R&D results phase. The information modelling of weapon system R&D is the R&D work process with information sharing by means of IWSDB Since IDEF is suitable for large scale system development like weapon system R&D, further studies on IDEF would be required to achieve the goal of defense CALS.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.137-147
• /
• 2010

The purpose of this study is to research a method of creating a new type of boundary by repeated disposition of single unit of modularized membrane successively. In the contemporary architectural indoor space, more highly dimensional analysis of boundary is required and the necessity of establishing boundary of a new concept that may satisfy cultural value, social value and artistic value as a whole as well as aesthetic and functional merit has been increased. In order to create a membrane that may fulfil the requirements of the diversified programs of space like this, an approach of complicated mechanism and high-dimensional calculation are required. At this time, digital GA modelling, parametric modelling technique may expand its range of possibility. One thing to be noted at this juncture is that indefinite expandability involved in digital modelling technique, modelling by grid of absolute and relative coordinates and convenience of systematization may surpass limitation of analogue or simple numerical calculation being progressed in the past. And in order to create solid process including unit modelling or pattern formation, Precise calculation process of computer is necessitated inevitably.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.10
• /
• pp.75-82
• /
• 2019

Few studies have been conducted regarding theoretical turning force modelling while considering cutting constant. In this paper, a new cutting force modelling technique was suggested which considers the specific cutting force coefficients for turning. The specific cutting force is the multiplication of the cutting force coefficient and uncut chip thickness. This parameter was used for experimental modelling and prediction of theoretical cutting force. These coefficients, which can be obtained by fitting measured average forces in several conditions, were used for the formulation of three theoretical cutting forces for turning. The cutting force mechanism was verified in this research and its results were compared with each of the experimental and theoretical forces. The deviation of force was incurred by a small amount in this model and the predicted force considering feed rate, nose radius, and radial depth shows a physical behavior in main force, normal force, and feeding force, respectively. Therefore, this modelling technique can be used to effectively predict three turning forces with different tool geometries considering cutting force coefficients.

• Coupled systems mechanics
• /
• v.11 no.1
• /
• pp.79-91
• /
• 2022

Models for water treatment processes include simulation, i.e., modelling of water quality, flow hydraulics, process controls and design. Water treatment processes are inherently dynamic because of the large variations in the influent water flow rate, concentration and composition. Moreover, these variations are to a large extent not possible to control. Mathematical models and computer simulations are essential to describe, predict and control the complicated interactions of the water treatment processes. An accurate description of such systems can therefore result in highly complex models, which may not be very useful from a practical, operational point of view. The main objective is to combine knowledge of the process dynamics with mathematical methods for processes estimation and identification. Good modelling practice is way to obtain this objective and to improve water treatment processes(its understanding, design, control and performance- efficiency). By synthesize of existing knowledge and experience on good modelling practices and principles the aim is to help address the critical strategic gaps and weaknessesin water treatment models application.