• Journal of the Korean Operations Research and Management Science Society
• /
• v.14 no.1
• /
• pp.97-107
• /
• 1989

In this study three types of aggregation methods such as the Estimate-Talk-Consensus (ETC) process, the Estimate-Talk-Estimate (ETE) process, and as a new approach the Estimate-Talk-Leader's Estimate (ETLE) process are compared to find which one of the three group processes considered is more effective than others. We, also, investigate the effect of group size on the performance of the group processes. Some experiments were conducted. It was shown that both the ETC and the ETLE processes performed better than the ETE process in approaching correct estimates in this judgmental task. As the size group increased, only the ETC and the ETC processes were shown to result in positive effect.

• Journal of environmental and Sanitary engineering
• /
• v.7 no.1
• /
• pp.45-56
• /
• 1992

The Anaerbic Anoxic/oxic process is one of the biological treatment methods to remove nitrogen and phosphorus effectively which are nutritional elements for eutrophication. Supernatant of primary sediment of Anaerobic digester is used as a carbon source instead of methanol methanol supply in usual A$_{2}$/O process. The efficiency of the following treatment processes are as follow : 1) Changing recycle ratio in the usual A$_{2}$/O process without the stage of Anaerobic digester. 2) Changing recycle ratio in the usual A$_{2}$/O process with the supernatant supply of the Anaerobic digester. In the result of comparison, changing recycle ratio is almost no effect in the removal of phosphorus, however the effect of removal in nitrogenous substance are remarkable, and the effect of Anaerobic digester is not as effective as expected because the BOD removed in the digester partly, the rate of phosphorus to the BOD exceed pertinent range.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.7 s.238
• /
• pp.1022-1027
• /
• 2005

In this study, ball milling process was applied to reduce the particle size of bio-material down to submicron size. The material used was Ibuprofen. The ball milling was performed at low temperature of about $-180^{\circ}C$. The effect of processing conditions (milling time, milling speed) on the particle size was determined. The results showed that the degree of crystallite of Ibuprofen was slightly reduced by the ball milling process. The results also showed that the size of Ibuprofen was significantly reduced by the ball milling process. The effect of milling time was significant within the milling time of six hours while it was small thereafter.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.6
• /
• pp.215-218
• /
• 2004

This paper presents a three-dimensional numerical simulation for thermal oxidation process. A new elasto-viscoplastic model for robust numerical oxidation simulation is proposed. The three-dimensional effects of oxidation process such as mask lifting effect and corner effects are analyzed. In nano-scale process, the oxidant diffusion is punched through to the other side of the mask. The mask is lifted so the thickness of oxide region is greatly enhanced. The compressive pressure during the oxidation is largest in the mask corner of the island structure. This is because the masked area near the corner is surrounded by an area larger than the others in the island structure. This stress induces the retardation of the oxide growth, especially at the masked corner in the island structure.

• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.143-149
• /
• 2017

Purpose: In recent years, weight reduction for improving fuel efficiency of the vehicle and cost reduction have been developed. The structure of suspension link is widely used as a single plate press structure which can reduce process and weight compared to existing pipe welding method. However, it was found that the lifetime of a single plate press structure is determined by initial defects that occurred during initial manufacturing rather than fatigue damage caused by driving. Methods: I research the mechanism of failure phenomenon of the single plate press assist arm of rear wheel. In addition, I investigate durability effect parameters to determine the link lifetime in inserting bush into single plate press process through durability test. Conclusion: I discover significant durability effect parameter in inserting bush into single plate press process. It is expected that the durability can be improved by suggesting a bush inserting process inspection guide for similar suspension link like single plate press structure.

• Journal of Power System Engineering
• /
• v.15 no.1
• /
• pp.51-56
• /
• 2011

The various process parameters of thermal spray process affects on quality of Ni-based coatings. Thus, there is need to analyze the effect of process parameters on quality of Ni-based coatings. In this paper, the effects of process parameters on hardness and wear rate of Ni-based coatings were investigated using 4 design of experiments. First, the Ni-based coatings were fabricated according to $L_9(3^4)$ orthogonal array. The hardness tests and the wear tests were performed on the Ni-based coatings. The analysis of variance for the hardness and wear rate were carried out. As a results, the acetylene gas flow and the powder feed rate were identified as main factors effected on the hardness and the oxygen gas flow and the acetylene gas flow were identified as main factors effected on the wear rate. The full factorial experiments design with different levels was applied for investigation of effect of these main factors.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.102-107
• /
• 2017

This study focuses on the effect of the elasticity modulus of jig material on blade edge shape in the grinding process of a sapphire medical knife. The ELID grinding process was applied as the edge-grinding method for sapphire material. Carbon steel and copper have been selected as the hard and soft jig materials, respectively. The blade edge created by ELID grinding was measured by a surface roughness tester and optical microscope. The shape of the ground edge and surface roughness were compared using the measurement results. As a result, it was found that chipping in the blade edge of the sapphire knife occurred more than in the case of jig material with a high-elasticity modulus because of the high normal force in the grinding process. Moreover, the maximum height surface roughness, $R_{max}$,of the ground surface was higher in the case of the jig material with a high-elasticity modulus due to the difference in elasticelongation. It was considered to lead to chipping from the notch effect.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.87-96
• /
• 2015

Purpose - Several domestic telecommunication companies have made a considerable effort to continuously grow and survive, and they have strived to thrive in the midst of mature market competition. To overcome this challenging situation and to grow continuously, while still meeting customer needs that are becoming more diverse and complicated with the passage of time, extensive support for internal marketing is essential. Without such internal support, companies face serious limitations and market roadblocks. The communication industry is a high-level service industry and a basic communications industry characteristic is its significant dependence on the employees delivering the services. Therefore, entrepreneurs in the information/communications industry, as well as existing competitors, should look to satisfy external customers through critical investment in internal customers (employees). Therefore, it is important for research to examine how internal factors influence technology innovation and service quality, which are the key drivers for companies that are seeking leading market positions. Research design, data, and methodology - The purpose of this study is to analyze the relationship of technology innovation and perceived service quality with the internal marketing factors in the communication industry and to offer suitable and effective internal marketing suggestions. The independent variables of this study are internal communication, education and training, the support of the executives, reward systems, and empowerment. The dependent variables are technology innovation and perceived service quality. Utilizing these, this paper studies the influence of internal marketing factors on technology innovation and perceived service quality. Results - The study results revealed the following. First, the identified internal marketing factors have a positive effect on technology innovation. Among the five internal marketing factors, three had a significant effect on product innovation, empowerment, the support of executives, and education and training, in this order. Second, the internal marketing factors also had a positive effect on the process innovation of technology innovation. The marketing factors, the support of executives, empowerment, internal communication, and education and training, in this order, significantly affect process innovation. Third, technology innovation had a positive effect on perceived service quality. All of the five service quality factors, namely, tangibles, reliability, assurance, responsibility, and empathy, in this order, significantly affect product innovation. Additionally, tangibles, reliability, responsibility, empathy, and assurance, in this order, significantly affect process innovation. Fourth, product and process innovation significantly affect tangibles and reliability in technology innovation. To enhance tangibles and reliability, process innovation should first be enhanced. Fifth, product and process innovation significantly affect responsibility and empathy in technology innovation. To enhance the responsibility and empathy, process innovation should first be enhanced. Sixth, product and process innovation significantly affect assurance in technology innovation. To enhance the assurance, product innovation should first be enhanced. Conclusions - According to the results, a company's internal marketing factors have a positive and significant effect on technology innovation and, further, product and process innovation have a positive and significant effect on the perceived serviced quality.

• Geomechanics and Engineering
• /
• v.32 no.1
• /
• pp.85-96
• /
• 2023

Microbially induced carbonate precipitation (MICP) is extensively discussed as a promising topic for ground stabilization. The practical effect of stabilizing the expansive soil is presented in this paper with a logical process from the bacterial activity to the treatment technology. Temperature, pH, shaking frequency, and inoculation amount are discussed to evaluate the bacterial activity. The physic-mechanic properties are also evaluated to discuss the effect of the MICP process on expansive soil. Results indicate that the MICP method achieves the mitigation of expansion. The treated soil has a low proportion of fine particles (< 5 ㎛), the plasticity index significantly decreases, and strength values improve much. MICP process has a significant cementation effect on the soil matrix. Moreover, the infiltration model test presents the coating effect on the topsoil. According to the relation between the CaCO₃ content and the treatment effect, the topsoil has better treatment than the deeper soil.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.4
• /
• pp.38-45
• /
• 1997

A new dynamic model for the cutting process inb the end milling process is developed. This model, which describes the dynamic response of the end mill, the chip load geometry including tool runout, the dependence of the cutting forces on the chip load, is used to predict the dynamic cutting force during the end milling process. In order to predict accurately cutting forces and tool vibration, the model which uses instantaneous specific cutting force, inclueds both regenerative effect and penetration effect, The model is verified through comparisons of model predicted cutting force with measured cutting force obtained from machining experiments.