• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.54-59
• /
• 2012

This study dealt with effect of the grinding in SCM420H planetary gears. The hardness, tooth profile, lead and roughness of the gear surface can be improved by grinding process. Therein, the grinding techniques are widely used especially as one of the physical surface improvement methods. As the results, the gear grinding process reduced vibration and noise, and increased the life of the gear. And the gear grinding improved the surface of gear tooth in a short time and low cost, thus, it is a very important process in manufacturing industry. But nowadays, it is hard to find the detail information of gear grinding process. The test piece is a planetary gear which is used in the industrial machine. The manufacture process of the test piece contains hobbing, shaving, carburizing and grinding. This study investigated the effect of the grinding process to the physiognomy and the fatigue strength of test piece which was made by SCM420H.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.113-123
• /
• 1998

The present study is to investigate the effect of experimental parameters on the heat transfer characteristics of a spherical capsule storage system using paraffins. N-Tetradecane and mixture of n-Tetradecane 40% and n-Hexadecane 60% were used as paraffins. Water with inorganic material was also tested for the comparison. The experimental parameters were varied for the Reynolds number from 8 to 16 and for the inlet temperature from -7 to 2$^{\circ}C$. Measured local temperatures of spherical capsules in the storage tank were utilized to calculate charging and discharging times, dimensionless thermal storage amount, and the average heat transfer coefficients in the tank. Local charging and discharging times in the storage tank were significantly different. The effect of inlet temperature on charging time was larger than that on discharging time, but the effect of Reynolds number on charging time was smaller than that on discharging time. Charging time of paraffins was faster by 11~72% than that of water with inorganic material, but little difference of discharging time was found among them. The effect of Reynolds number on the dimensionless thermal storage was less during charging process and more during discharging process than the effect of inlet temperature. The effect of the inlet temperature and the Reynolds number on the average heat transfer coefficient of the storage tank was stronger during discharging process than during charging process. The average heat transfer coefficients of the spherical capsule system using paraffins were larger by 40% than those using water.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.1
• /
• pp.57-65
• /
• 2009

The purpose of Defense Acquisition Project is that the superior weapons validated needs and performance are supplied to military user with limited financial resources and time. The Warship Acquisition Project is not only like this, But also has special characteristics of long project period and first-constructed ship's operation employment. So, The Warship Acquisition Project need systematic and efficient procedure & management. And this paper researches System engineering application of imaginary WIG(Wing-In-Ground Effect) ship acquisition project based Systems Engineering Handbook ver.3.1 published by INCOSE, the lead of field. The Imaginary WIG(Wing-In-Ground Effect) ship acquisition project applied the four processes(technical project, Enterprise & Agreement, Enabling Systems), the basis of INCOSE Engineering Handbook ver.3.1, and the each process output compared with DAPA(Defense Acquisition Program Administration)'s warship acquisition procedure.

• Management Science and Financial Engineering
• /
• v.9 no.2
• /
• pp.21-45
• /
• 2003

Various organizational factors effect successful implementation of IT enabled business transformation. Among them, the most critical success factor is deemed to overcoming change management problem. Lots of studies have been made on implementation methodologies and business process formalizations to encourage organizational members to accept new business process changes. However, the logic of process redesign still depends on qualitative problem solving techniques mostly depending on basically human intuition such as brainstorming, cause-and-effect analysis, and so on. In this paper, we develop algorithmic procedure applicable to designing various business process changes such as process automation, business process resequencing, and more radical process integration. The framework is employed from dynamic programming approach in the literature, which is based on the decision making paradigm of organizations to abstract business processes as quantitative decision models. As such, our research can fill the gap of limited development of theory based analytic methodologies for business process design, by providing objective rationale to reach the consensus among the organizational members including senior management.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.4
• /
• pp.303-307
• /
• 2007

This paper investigated the effect of the pad buffing process on the material removal characteristics and pad stabilization during silicon chemical mechanical polishing. The pads surface were controlled by the buffing process using a buffer made by the sandpaper. The buffing process is based on abrasive machining by using a high speed sandpaper. The controlled pad by the buffing process show less deformation deviation and stable material removal rate during the CMP process. In addition, the controlled pad ensure better uniformity of removal rate than comparative pads. As a result of monitoring, the controlled pad by the buffing process demonstrated constant and stable friction force signals from initial polishing stage. Therefore, the tufting process could control the pad surface to be uniform and improve the performance of the polishing pad.

• Korean Journal of Pharmacognosy
• /
• v.44 no.1
• /
• pp.41-46
• /
• 2013

Alzheimer's disease (AD), most common form of dementia is characterized that memory deficit and loss of cognitive function. The Codonopsis lanceolata (C.lanceolata) was treated by high hydrostatic pressure process and fermentation. This study was evaluated cognitive enhancing effect C.lanceolata extract by high hydrostatic pressure process and fermentation and compared with common C.lanceolata extract using Morris water maze and passive avoidance test. And their neuroprotective effect on glutamate induced oxidative stress in HT22 cell was investigated by MTT assay. High hydrostatic pressure process and fermented C.lanceolata extract (HFCE) and common C.lanceolata extract (CCE) (100 and 300 mg/kg) were administered to mice. Results showed HFCE enhanced cognitive function than CCE as shown by decrease in escape latency time. HFCE increased the latency time of the passive avoidance test compared to CCE. Furthermore, HFCE showed significant neuroprotective effect against glutamate cytotoxicity in HT22 cells. These results indicate that high hydrostatic pressure process and fermented more improve spatial cognitive ability of C. laanceolata.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.490-495
• /
• 2012

The catalytic effect induced by activated carbon (AC) was evaluated during the phenol treatment using an ozone/AC ($O_{3}/AC$) process. In the case of the addition of AC to the ozone only process, the decomposition efficiency of dissolved ozone and phenol increased with increasing the amount of AC input. It was that the OH radical generated from the decomposition of dissolved ozone by AC had an effect on the removal of phenol. It was shown as the catalytic effect of AC ([$\Delta$phenol]/$[{\Delta}O_{3}]_{AC}$) in this study. The maximum catalytic effect was approximately 2.13 under 10~40 g/L of AC input. It approached to the maximum catalytic effect after 40 min of reaction with 10 and 20 g/L of AC input, while the reaction time reached to the maximum catalytic effect under 30 and 40 g/L of AC input was approximately 20 min. Moreover, the removal ratios of total organic carbon (TOC) for ozone only process and ozone/AC process were 0.23 and 0.63 respectively.

• Korean Management Science Review
• /
• v.10 no.2
• /
• pp.111-120
• /
• 1993

The most important factors for a product to survive in the market are cost and quality. In recent years, quality proceeds to cost. There are many techniques of use to improve the quality of a product. One of the techniques is applying statistical methods (especially Taguchi method) to real operational conditions for a continuous manufacturing process in P company. There are 91 factors to control in the process. So, we predetermined 7 main effect factors and 6 interactive effect factors by statistical methods and advices of engineers. With these 13 factors, we determined the optimal level of operations for the process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5098-5103
• /
• 2012

This study examines the effect of information systems through communication and process competency to increase customer relationship competency. This study focuses on the effect of information systems which help internal customers for their work to satisfy the external customers. Based on the data collected by KRIVET and the Ministry of employment and labor, information systems, communication, process competency, and customer relationship competency are examined. The result showed that information system has an influence on communication and process competency, significantly. Process competency affect customer relationship competency positively while communication does not. However, communication has a positive influence on process competency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.118-119
• /
• 2009

This paper presents the feature profile evolution silicon deep trench etching, which is very crucial for the commercial wafer process application. The silicon deep trenches were etched with the SF6 gas & Hbr gas based process recipe. The optimized silicon deep trench process resulted in vertical profiles (87o~90o) with loading effect of < 1%. The process recipes were developed for the silicon deep trench etching applications. This scheme provides vertically profiles without notching of top corner was observed. In this study, the production of SF6 gas based silicon deep trench etch process much more strongly than expected on the basis of Hbr gas trench process that have been investigated by scanning electron microscope (SEM). Based on the test results, it is concluded that the silicon deep trench etching shows the sufficient profile for practical MOS FET silicon deep trench technology process.