• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.299-307
• /
• 2016

In order to clarify the availability of heat treatment for catechu dyeing, effect of color developing by heating process on cotton fabrics dyed with catechu extract was investigated. Dyed fabrics were heated various time(min) at $150^{\circ}C$. The cases of non-mordanting and mordanting were compared, and examined the effect of sodium acetate as an agent to promote the color developing to fabrics. Experiments with after-mordanting method showed that various colors can be obtained using catechu. K/S values of dyed fabrics with Al, Cu, Fe mordant were higher than the case of no mordant. The fabric by Cu mordanting showed 3 times to the case of no mordant. Fabrics dyed with catechu by mordanting lowered $L^*$ value while there was little change in $a^*$, $b^*$ value as the heating process progressed. Therefore, K/S values were increased due to heating process. The effects of adding sodium acetate in dyeing bath on dyed fabrics were shown higher K/S values, and the $L^*$ values were lower than those without sodium acetate according to heating time increase. The result show sodium acetate had a promoting effect on the color developing to the fabrics by heating process, it was very effective.

• Korean System Dynamics Review
• /
• v.13 no.4
• /
• pp.33-55
• /
• 2012

The research is to identify important diffusion factors and their effects on green car diffusion process using system dynamics perspectives and a causal-loop analysis. Through a deep review on previous research, we have found the important factors of green car diffusion process. Price, driving range, network effect, recharge system, fuel cost had important facilitation on consumer attraction and green car diffusion. Based on the review, we have constructed a causal loop diagram explaining hybrid car diffusion process. We have found 3 important reinforcing loops in the causal loop diagram. Loop for learning & economies of scale(supply side), loop for network effect(consumer side), and loop for battery development(technology side) had most significant roles in the whole diffusion process. Through a deliberate analysis on the 3 causal loops, we have found meaningful results. First, there seems to exist a critical mass in the diffusion. Second, of the 3 loops, the battery technology had most significant role. Third, not consumer installed base but sales must be a standard to decide whether the critical mass is achieved or not. Based on these findings, several meaningful implications are suggested for the government and corporations related to the green car industries.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.10
• /
• pp.87-95
• /
• 2021

This study aims to demonstrate the impact of BPR in reducing cost in international business organizations by analyzing the impact of decentralization, re-engineering organizational structures, re-engineering human resources, industrial process technology, improving total quality standards, and value engineering. The study population includes all the international business organizations operating in the Middle East, with the condition that they operate in at least four countries. The results showed that there is a significant effect of all dimensions of BPR in reducing costs in international business organizations operating in the Middle East. When studying the impact of the dimensions combined, the moral effect appeared at each processes (decentralization, re-engineering of human resources and industrial process technology), while the moral effect did not appear in (rebuilding organizational structures, improving total quality standards, and value engineering). This does not negate the importance of the impact of these dimensions, but rather shows a disparity between dimensions in reducing cost, when studying its combined effect. The study recommends that organizations should adopt modern management accounting methods, including value engineering, in order to identify and enhance activities that add value to the organization's operations, as well as identify and eliminate non-value adding activities, in order to reduce costs.

• Korean Journal of Culture and Social Issue
• /
• v.27 no.3
• /
• pp.325-350
• /
• 2021

The purpose of this study was to examine the mediating effect of the parent-adolescent career congruence process in the association between the parent-adolescent relationship and career identity of South Korean college students. In particular, we investigated which kind of career congruence process mediates the positive effect of the interdependent parent-adolescent relationship (in support of emotional bond and filial piety) and the independent parent-adolescent relationship (in support of independence and autonomy) on career identity. Data of 509 college students were analyzed for this study, and parallel multiple mediation analysis was performed. As a result, the complementary and attunement congruence process fully mediated the relationship between parent-adolescent affective bonding and career identity. Authoritative filial piety had a negative direct effect on career identity, but a positive indirect effect by mediating the complementary and attunement congruence process. The mediation analysis showed that both complementary and attunement congruence process fully mediated the association between independent parent-adolescent relationship and career identity. However, family intrusion had only a negative direct effect on career identity. On the other hand, the supplementary congruence process did not have significant mediating effects between all types of parent-adolescent relationships and career identity. Also, the supplementary congruence process had a negative direct effect on career identity. Based on these results, we discussed culturally universal and culturally specific characteristics of the relationship between parent-adolescent relationships and career identity, along with the limitations and recommendations for future research.

• Journal of Power System Engineering
• /
• v.4 no.2
• /
• pp.40-45
• /
• 2000

Some engineering materials are often known to have considerable spatial variation in their resisting strength and other properties. The objective of this study is to investigate the averaging effect and the applicability of extremal statistic for the statistical size effect. In the present study, it is assumed that the material property is a stationary random process in space. The theoretical autocorrelation function of the material strength are discussed for several correlation lengths. And, in order to investigate the statistical size effect, the material properties was simulated by using the non-Gaussian random process method. The material properties were plotted on the Weibull probability papers. The main results are summarized as follows: The autocorrelation function of the material properties are almost independent of the averaging length. The variance decreases with increasing the averaging length. As correlation length is smaller, the slope is larger. And also, it was found that Weibull statistics based on the weakest-link model could not explain the spatial variation of material properties with respect to the size effect satisfactory.

• Journal of the Korean Society of Combustion
• /
• v.3 no.1
• /
• pp.11-19
• /
• 1998

The influence of oxidant addition on soot formation is investigated experimentally with ethylene, propane and mixture fuel co-flow diffusion flames. Oxidant addition into fuel shows the increase of integrated soot volume fractions for ethylene, ethylene/ethane and ethylene/methane mixture flames. However, the increase of integrated soot volume fraction with oxidant addition was not significant for propane and ethylene/propane mixture flames. This discrepancy is explained with $C_2\;and\;C_3$ chemistry at the early stage of soot formation process. The oxidant addition increases the concentration of $C_3H_3$ in the soot formation region, and therefore, enhances soot formation process. A new soot formation rate model that includes both dilution effect and chemical effect of oxygen is suggested to interpret the increase of integrated soot volume fractions with oxidant addition into ethylene. Also, the role of adiabatic flame temperature for the chemical effect of oxygen addition into fuel was reviewed. The influence of oxidant or diluent addition into fuel on soot formation process are the fuel dilution effect, the adiabatic flame temperature altering effect and/or the chemical effect of oxygen. Their relative importance could change with fuel structure and adiabatic flame temperature.

• Journal of Distribution Science
• /
• v.21 no.9
• /
• pp.23-34
• /
• 2023

Purpose: This study aims to determine the effect of business processes, quality of human resources and organizational culture and its distribution in creating value to achieve competitive advantage. Research Design, Data, and Methodology: Data collection in this study was carried out by distributing questionnaires to 90 employees of Delivery service companies in Makassar City. Partial Least Square (PLS) analysis was used as data analysis. Result: this study indicates that business processes do not directly affect competitive advantage, but business processes will have an effect if they go through the value creation process as an intervening variable, while the quality of human resources and work environment have a direct effect on competitive advantage and have a direct effect on Value creation. The quality of human resources and organizational culture also have an indirect effect on competitive advantage through the value creation process. This research also indicates that value creation has an effect on competitive advantage. Conclusion: Competitive advantage will be realized if organizational processes run well, company management that able to carry out good organizational processes and able to create a conducive organizational culture, will be able to distribute company resources to create value that leads to achieving competitive advantage for companies in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2440-2450
• /
• 2009

The aim of the study is to look at the impact of 'NPD process planning proficiency' on NPD performance. In particular, the current study examines this effect at firm's level (NPD program), rather than at the level of individual project. This study investigate the impact of process planning proficiency considering other NPD proficiencies (i.e. marketing and technical proficiency). In addition to the main effect of process planning proficiency, the current study investigates the interaction effect between process planning proficiency and marketing proficiency (or technical proficiency). Based on a cross-industry sample of 103 Korean manufacturers, this study examines the impact of NPD process planning proficiency on product family performance. The current study focuses on platform projects which play a critical role on product family's successes. NPD process planning proficiency has significant impact on both NPD technical and commercial performance. Technical proficiency is not directly associated with NPD performance. However, this study finds the interaction effects of technical proficiency with process planning proficiency on NPD performance.

• YAKHAK HOEJI
• /
• v.57 no.5
• /
• pp.323-329
• /
• 2013

This study was designed to determine and compare the cognitive enhancing effect of various Codonopsis lanceolata extracts by steaming, fermentation and high hydrostatic pressure process. We prepared water extract of C. lanceolata, steamed C. lanceolata, steamed and fermented C. lanceolata and C.lanceolata by high hydrostatic pressure process and fermentation. Cognitive enhancing effect of extracts was evaluated in scopolamine-induced memory impairment mice using by passive avoidance test and Morris water maze tests. MTT assay was conducted to investigate neuroprotective effect on glutamate induced cell death in HT22 cells. Steamed and fermented C. lanceolata water extract decreased escape latency in Morris water maze test and increased the latency time of the passive avoidance test compared to other extracts. Furthermore, the steamed and fermented C. lanceolata water extract showed neuroprotective effect. These results suggest that steaming and fermentation process more improve cognitive enhancing effect of C. lanceolata than other process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.9
• /
• pp.1400-1413
• /
• 1997

Semi-solid forging(SSF) process of A356 aluminium alloy has been studied to assess the effect of process variables on the component integrity. Semi-solid material(SSM) was fabricated by mechanical and electro-magnetic stirring process. The fabricated SSM by using mechanical stirring process has been carried out on cooling rate of 0.022.deg. C/sec 0.0094.deg. C/sec and stirring speed n=600, 1000 rpm, respectively. The fabricated SSM by using electro-magnetic stirring process is supplied by Pechiney. The holding time and temperature in the semi-solid state before forging also affects the globular microstructure of alloy. Therefore, the influence of these two parameters is discussed in terms of the microstructure of alloy. The SSF process has been conducted with three different die temperatures($T_{die}$=250.deg. C, 300.deg. C, 350.deg. C) and two kinds of gate types(straight gate and orifice gate). This paper is to investigate the influence of gate shapes of die on filling phenomena in SSF process more deeply. The mechanical properties of forged components were also investigated for variation of process conditions such as die temperature, gate shape and SSM.