• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.162-168
• /
• 2008

Recently surround molding parts using stainless steel are applied to international and domestic high grade vehicles, but there are great difficulties in die manufacture because of springback and twist after forming process. To solve this problem, finding the method of reduction springback is very important. In this study the springback which might happen during making a die that produce stainless steel surround molding parts is predicted and the geometry of die which satisfy the tolerance between product and panel after forming and springback will be suggested using automatic die compensation module.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.198-206
• /
• 2011

This paper presents a new programmable compensation circuit (PCC) for a System-on-Chip (SoC). The PCC is integrated with $0.18-{\mu}m$ BiCMOS SiGe technology. It consists of RF Design-for-Testability (DFT) circuit, Resistor Array Bank (RAB) and digital signal processor (DSP). To verify performance of the PCC we built a 5-GHz low noise amplifier (LNA) with an on-chip RAB using the same technology. Proposed circuit helps it to provide DC output voltages, hence, making the RF system chain automatic. It automatically adjusts performance of an LNA with the processor in the SoC when it goes out of the normal range of operation. The PCC also compensates abnormal operation due to the unusual PVT (Process, Voltage and Thermal) variations in RF circuits.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.3
• /
• pp.248-254
• /
• 2006

It is necessary to improve the exactness and adaptation of the working environment for the intelligent robot system. The vision sensor have been studied for a long time at this points. However, it has many processes and difficulties for the real usages. This paper proposes a visual servoing in the virtual environment to support OLP(Off-Line-Programming) path compensation and supplement the problem of complexity of the old kinematical calibration. Initial robot path could be compensated by pixel differences between real and virtual image. This method removes the varies calibrations and 3D reconstruction process in real working space. To show the validity of the proposed approach, virtual space servoing with stereo camera is carried out with WTK and openGL library for a KUKA-6R manipulator and updated real robot path.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.911-914
• /
• 1995

Measurement and inspection of freeform surface are required in reverse design process. In the case of surface measurement using a touch probe, probe radius compensation affects measuring accuracy But current industrial practice depends upon an operator's experience to compensate for probe radius. In this paper, an on-the-machine measuring and inspection system for freeform surfface was developed. Probe radius compensation methodology was studied via modeling of B-spline surfaces based on digitized data. The accuracy and reliability of the measurement system was confirmed through various kinds of experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.367-372
• /
• 2012

The biggest factors that lower the machining accuracy are thermal deformation and chatter vibration. In this article, we introduce the study case of technology that can automatically compensate the errors of these factors of a machine during processing on the machine tool's CNC(Computerized Numerical Controller) in real time. This study is related to the detection and compensation of thermal deformation and chatter vibration that can compensate for faster and produce processed goods with more precision by autonomous compensation. In addition, this study is related to the active control of vibration during machining, monitoring of cutting force and auto recognition of machining axes origin. Thus, we attempt to introduce the related contents of the development we have made in this article.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.216-222
• /
• 1996

Since many typical 2.5 Gbps optical transmitter modules use a 50$\Omega$ characteristic impedance, they require relatively high voltage and high power sources compared to the 25$\Omega$ module. However, simple replacement of the 50$\Omega$ internal matching impedance with 25$\Omega$ results in bandwidth reduction and consequent problem of data transmitter module is proposed in order to expand the modulator bandwidth. From the calculated resutls based on accurate 3-dimensional inductance analysis, we have found that the series parasitic inductance is a dominant element limiting the bandwidth and the insertion of a 2.5pF capacitor in parallel to the 20$\Omega$ matching resiter can increase the 3 dB bandwidth about 1.4GHz wider. The time-domain results show the rise time (140 psec) without the compensation is greatly improved to 63 psec with the compensation. This capacitive ocmpensation can be implemented easily and be compatible with common manufacturing process of the optical transmitter module.

• Journal of electromagnetic engineering and science
• /
• v.7 no.3
• /
• pp.103-108
• /
• 2007

In this paper, a low-power 2.4 GHz front-end for sensor network application (IEEE 802.15.4 LR-WPAN) is designed in a 0.18 um CMOS process. A power supply circuit with a novel temperature-compensation scheme is presented. The simulation and measurement results show that the front-end (LNA, Mixer) can achieve a voltage gain of 35.3 dB and a noise figure(NF) of 3.1 dB while consuming 5.04 mW (LNA: 2.16 mW, Mixer: 2.88 mW) of power at $27^{\circ}C$. The NF includes the loss of BALUN and BPF. The low-IF architecture is used. The voltage gain, noise figure and third-order intercept point (IIP3) variations over -45$^{\circ}C$ to 85$^{\circ}C$ are less than 0.2 dB, 0.25 dB and 1.5 dB, respectively.

• Korean Business Review
• /
• v.22 no.1
• /
• pp.27-44
• /
• 2009

This paper compares the accounting standards for stock option of Japan and Korea. Especially, tire setting process of accounting standards for stock option, accounting methods and disclosures for stock option in two countries are analyzed. The results provide that two countries shaw different characteristics in accounting standards for stock option. First, in Japan, acquired services are reported as compensation costs and capital adjustments. On the other hand, in Korea, in case of cash-settled share- based payment transactions, acquired services are reported as compensation costs and capital adjustments, but in case of equity-settled share- based payment transactions, acquired services are reported as compensation costs and debt. Second, when tire stock option rights are abandoned, they are reported as extraordinary items in Japan and are reported as other surplus in Korea. Third, though both countries do not choose specific stock option pricing model, Japan prefers Black-Sholes Model and Korea regards binomial model as proper model.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.457-458
• /
• 2008

This paper presents an output common mode current compensation method to achieve both constant Gm and constant gain. A conventional rail-to-rail CMOS op-amp with constant Gm was designed by using complementary differential input stage and current compensation skills. But it doesn't operate constant gain, because of output resistance variation. With $0.18{\mu}m$ CMOS process, the simulation results show that the differential gain variation can achieve less than 1.3dB. And a 60dB gain, a 13.5MHz unity gain-frequency, and 1mW power consumption, when operating at 1.8V and 10pF load.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.179.6-179
• /
• 2001

This paper proposes the recognition method of the strip shape using the Least-Square method and the distinction method of the asymmetric shape and the compensation method upon the shape control values for the stainless steel cold rolling mill. This paper proposes the shape recognition method before control and the compensation method to minimize the fluctuation of the shape deviation and to get symmetric shape. This paper shows on line test results to verify the performance of the control method for the process. The experiments have been performed with respect to various material type, thickness, and strip width. The performance of the proposed method is obtained excellent quality and high productivity as results.