• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1924-1926
• /
• 2001

A novel wet release process ($\mu$ CARP - Micro Channel Assisted Release Process) for releasing an extreme large-area plate structure without etching hole is proposed and experimented. Etching holes in conventional process reduce a effective area and degrade an optical characteristics by a diffraction. In addition, as the area of a released structure increases, the stietion becomes more serious. The proposed process resolves these problems by the introduction of a micro fluidic channel beneath the structure which will be released. In this paper, a 5 mm${\times}$5mm-single crystal silicon plate structure was released by the proposed $\mu$CARP without etch holes on the structure. The variation in etching time with respect to the of the introduced micro channel is also examined. This process is expected to be beneficial for the actuator of a nano-scale data storage and the scanning mirror.

• The Mathematical Education
• /
• v.54 no.4
• /
• pp.365-383
• /
• 2015

Factorization asks the recognition of the structure of polynomials, compared to polynomial expansion with process characteristic. Therefore it makes students experience a lot of difficulties. This study aims to figure out causes of the difficulties by identifying students' cognitive characteristics in factorizing in the perspective of 'structure sense'. To do this, we gave six factorizing problems of three types to middle school students and selected six participants as interviewees based on the test results. They were classified into two categories, structure sense and non-structure sense. Through this interview, we figured out the interviewee's cognitive characteristics and the causes of difficulty in the perspective of structure sense. Furthermore, we suggested some didactical implications for encouraging structure sense in factorizing by identifying assistances and obstacles for recognition of structures.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.4
• /
• pp.61-68
• /
• 2002

This paper provides a method of consciousness structure analysis for research and development project evaluation using fuzzy structure modeling(FSM). Fuzzy structure modeling, which is a modeling method for consciousness structure, has a large number of pairwise comparison by human subjective judgement and is difficult to check the consistency index of denoting the precision for human judgement. Thus, in this paper, we analyzed the structure of consciousness by fuzzy structural modeling method, introducing the concept of pairwise comparison matrix in Analytic Hierarchy Process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.58-64
• /
• 2011

In this paper, research on the manufacturing technology of hexagonal structure core is investigated. Also the optimal forming process of the honeycomb core is developed and the rolling process is analyzed using finite element code, $DEFORM^{TM}$-3D. The standard honeycomb has a uniform hexagonal structure defined by the material, cell size, cell wall thickness and bulk density. Honeycomb core products can be made from any thin, flat material. The most common cell configuration is the hexagon but there are many other shapes for special applications. Because of the precision shape and the thin thickness, the honeycomb core is not easy to manufacture in the metal forming process. Through this study it was confirmed that after the rolling process, the section of honeycomb close to the standard shape can be obtained. This result is reflected to the manufacturing process design for the honeycomb core.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.180-186
• /
• 2002

The simulated die-casting process in which the traditional plaster casting process is combined with Rapid Prototyping technology is being used to produce Al, Mg, and Zn die-casting prototypes. Unlike in the die-casting process, molten metal in the conventional plaster casting process is fed via a gravity pour into a mold and the mold does not cool as quickly as a die-casting mold. The plaster castings have much larger and grosser grain structure as compared as the die-castings and the thin walls of the plaster mold cavity may not be completely fillet Because of lower mechanical properties induced by the large grain structure and incomplete Idling, the conventional plaster casting process is not suitable for the trial die-casting Process. In this work, an enhanced trial die-casting process has been developed in which molten metal in the plaster mold cavity is vibrated and pressurized simultaneously. Patterns for the casting are made by Rapid Prototyping technologies and then plaster molds, which have runner system, are made using these patterns. Imparted pressurized vibration to molten metal has made grain structure of castings much finer and improved fluidity of the molten metal enough to obtain complete filling at thin walls which can not be filled in the conventional plaster casting process.

• IE interfaces
• /
• v.17 no.2
• /
• pp.190-199
• /
• 2004

Recently, many enterprises are introducing a workflow management system for the successful implementation of BPR(Business Process Reengineering). Proposed in this study is the workflow management system which has a light-weight component structure and an XPDL(XML Process Definition Language) file interpretation facility. The XPDL is the standard process definition exchange format developed by WfMC(Workflow Management Coalition). The major causes of inefficiency at current implementations of workflow management systems are the centralized workflow engine structure and the use of proprietary workflow definition format among most solutions. The proposed light-weight component structure in this study is the intermediate structure that takes the strength of both centralized and distributed workflow engines. And a prototype workflow system which uses an XPDL process definition file as input is developed through the thorough analysis of functional requirements.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.851-856
• /
• 1996

Copper Phthalocyanine (CuPc) thin films were fabricated on the silicon wafers by plasma activated evaporation method and structural analysis were carried out with various spectroscopies. The CuPc films had dense and smooth morphology and they also showed good mechanical properties and chemical resistance. The main molecular structure of the CuPc, which is the conjugated aromatic heterocyclic ring structure, was maintained even in the plasma process. However, metal-ligand (Cu-N) bands were deformed by the plasma process and the structure became amorphous especially at higher process pressures. Oxygen impurities were incorporated in the film and carboxyl functional groups were formed at the peripheral benzene ring. The structure and morphology of the films were dependent on the process pressure but relatively irrespective of the RF power.

• Research in Mathematical Education
• /
• v.14 no.1
• /
• pp.33-50
• /
• 2010

The mathematical thinking which transforms important mathematical content and developed into mathematical structure is a vital process in building up mathematical ability as mathematical knowledge based on structure. Such process based on students' recognition of mathematical concept. Developing mathematical thinking into mathematical structure happens when different cognitive units are connected and compressed to form schema of solution, which could happen through some guided problems. The effort of arithmetic approach in problem solving did not necessarily provide students the structure schema of solution. The using of equation to solve the problem is based on the schema of building equation, and is not necessary recognizing the structure of the solution, as the recognition of structure may be lost in the process of simplification of algebraic expressions, leaving only the final numeric answer of the problem.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.105-108
• /
• 2003

Long length of Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor owders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. We designed and made a continuous Ic measurement system for Bi-2223/Ag HTS tape. We could achieve best Ic of 65 A at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process.

• Journal of Korean Society for Quality Management
• /
• v.11 no.2
• /
• pp.2-9
• /
• 1983

As will be seen, this paper is tries that the research on the mathematical structure of Markov process and Markovian sequential decision process (the policy improvement iteration method,) moreover, that it analyze the logic and the characteristic of behavior of mathematical model of Markov process. Therefore firstly, it classify, on research of mathematical structure of Markov process, the forward equation and backward equation of Chapman-kolmogorov equation and of kolmogorov differential equation, and then have survey on logic of equation systems or on the question of uniqueness and existence of solution of the equation. Secondly, it classify, at the Markovian sequential decision process, the case of discrete time parameter and the continuous time parameter, and then it explore the logic system of characteristic of the behavior, the value determination operation and the policy improvement routine.