• Journal of Environmental Science International
• /
• v.7 no.3
• /
• pp.401-408
• /
• 1998

An experimental research was preformed for the development of an effective process for zinc oxide waste(zinc ash) reuse. Zinc was selectively leached from zinc ash by 30 vol.% D2EHPA In kerosine solution, and the leaching velocity was quite fast. Zinc leached was stripped by sulfuric acid solutions, and the amount of zinc stripped was linearly Increased with the amount of sulfuric acid used. Zinc oxide fine particles were obtained by dropwise adding of sodium hydroxide solution to the resultant aqueous zinc solution at 85$^{\circ}C$.

• Journal of Digital Contents Society
• /
• v.10 no.4
• /
• pp.633-637
• /
• 2009

In this paper, we present the reuse module library generating algorithm and register-transfer (RT) library generating algorithm considering the power consumption of reuse module for field-programmable gate array (FPGA) technology mapping in order to implement into the circuit for calculating power consumption. To realize the circuit of calculation of power consumption, the FPGA is selected. Considering lookup table (LUT) conditions of selected FPGA, technology mapping process is conducted to minimize the total power consumption. With these information, the circuit is realized using suitable given power consumption among allocated results of modules.

• Korean Membrane Journal
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2000

In Kimchi (a salt-pickled and fermented food) manufacturing industry, the process of brining and rinsing the raw vegetable produces a vast amount of wastewater of high salinity. Instead of expensive and low-efficient conventional treatment system, brining wastewater reuse system was developed using hybrid chemical precipitation/microfiltration. In the microfiltration of chemically treated brining wastewater, comparison of flux, backwashing frequency and energy consumption was made between dead-end and crossflow filtration mode. The optimum location of neutralization step in this system was also discussed in connection with the microfiltration performance. The quality test of Kimchi prepared by the reuse system confirmed the new approach was successful in terms of water/raw material(salt) saving and wastewater reduction.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.04b
• /
• pp.1-12
• /
• 1999

In Kimchi (a salt-pickled and fermented food) manufacturing industry, the process of brining and rinsing the raw vegetable produces a vast amount of wastewater of high salinity. Instead of expensive and low-efficient conventional treatment system, brining wastewater reuse system was developed using hybrid chemical precipitation / microfiltration. In the microfiltration of chemically treated brining wastewater, comparison of flux, backwashing frequency and energy consumption was made between dead-end and crossflow filtration mode. The optimum location of neutralization step in this system was also discussed in connection with the micro filtration performance. The quality test of Kimchi prepared by the reuse system conformed the new approach was successful in terms of water/raw material (salt) savings and wastewater reduction.

• The Journal of Society for e-Business Studies
• /
• v.5 no.2
• /
• pp.49-60
• /
• 2000

A major topic in the field of network and telecommunications is doing business on the Word Wide Web(WWW), which is called Electronic Commerce(EC). Another major topic is blending Artificial Intelligent techniques with the WWW. To provide customer with the information of goods in suit with a customer liking, we propose multi agent system which is consist of customer agent and search agent etc. Also we use case-based reasoning for customer liking searching the information of goods and training through the reuse. This reuse make efficient management of information and a process of operation. In the relation between customer and goods, if there are some goods which is not search from case-base reasoning, we calculate satisfaction function for customer purchase goods. And to provide customer with the information of goods in the first of satisfaction function, This EC system can always provide the information of goods which is satisfied to customer.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.95-97
• /
• 2003

The main purpose of this work is to investigate the performance of membranes for treatment of dyeing wastewater. The microfiltration (MF) membranes (titania-blended polysulfone & alumina) were prepared. The nanofiltration (NF) and reverse osmosis (RO) membranes were kindly supplied by the Sae-Han. In order to reuse the wastewater for dyeing, the effluents were treated by the high flux RO and the fouling resistant RO (FRM) membranes. Also, the NF membrane was used for water reuse in rinsing.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.96-104
• /
• 1997

The objective of this research project was to develop the wooden footpath block to reuse of wood waste. Some physical and mechanical properties of the wooden block such as water absorption, thickness swelling, modulus of rupture, internal bond, density profile and impact resistance were studied. Water absorption and thickness swelling of the wooden block were greatly reduced when the wooden block was pressed inside the forming device than by conventional hot pressing. Also, Modulus of rupture and internal bond of the wooden block were increased greatly when the pressing was completed inside the forming device. The density profile of the wooden block was improved up to 93.5%, minimum to average density ratio. The wooden block manufactured in this study have excellent physical and mechanical prperties in comparison with existing wood based materials. So, these wooden blocks are applicable to footpth block or other exterior members.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.289-296
• /
• 2005

Purpose of this research is to quantitatively and qualitatively investigate the blow down wastewater produced from Yeosu Industrial Complex. Approximately, 38,325,000 tons/year of wastewater is produced, processed and finally discharged. Six representative companies, namely, A, B, C, D, E, F were chosen for this study. Each company produce over 5,000 tons/day of wastewater. In total, 6,844 tons/day of blow down water is produced from these six companies, put together. However, companies A and C produce about 24% and 37% of blow down water, respectively. It was found that the blow down water had favorable qualities, except for its high conductivity, ranging from 230 to $1,700{\mu}s/cm$. It was evident that, this water can be suitable for reuse, for industrial purposes, if a suitable treatment, for example, RO membrane process is adopted to remove high conductivity.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.597-600
• /
• 2010

소프트웨어 재사용(Software Reuse)은 소프트웨어 생산성을 높이는 방법임에도 불구하고 내장형 소프트웨어 개발 분야에서의 적용은 많은 어려움이 있다. 내장형 소프트웨어는 개발된 소프트웨어의 실행환경이 서로 다르고, 하드웨어 의존성이 높기 때문이다. 국방 분야에서의 내장형 소프트웨어는 보안성이라는 특성상 타 프로젝트의 모범사례를 적용하는 데는 정보 공유의 어려움이 있어 왔다. 본 논문에서는 MIL-STD-498에 기반하여 국방 분야의 내장형 소프트웨어 재사용 프로세스에 관해 연구하고 적용 결과를 제시하였다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.1
• /
• pp.41-47
• /
• 2018

Radioactive substances, especially $^{137}Cs$ discharged in the course of Nuclear Power Plant Accident or maintenance of power plants, cause contamination of the soil. For habitation of residents and reuse of industrial land, it is inevitably necessary to decontaminate the soil. This study examines a soil washing process that has actually been used for washing of radioactive-contaminated soil. The soil washing process uses a washing agent to weaken surface tension of the soil and cesium, separating cesium from the soil. In this study, in order to raise the efficiency of the process, a flocculating agent was added to the washing water to remove fine soil and cesium. The cesium concentrations before and after applying the flocculating agent to cesium solution were measured through ICP-OES. When using 0.1 g of J-AF flocculating agent in the experiment, the maximum Cs removal performance was approximately 88%; the minimum value was 67%. Species combinations between cesium and soil were predicted using Visual MINTEQ Code; the ability to reuse the washing water or not, and the removal rate of the fine soil, determined via measurement of the turbidity after applying the flocculating agent, were determined.