• 산업경영시스템학회지
• /
• 제24권63호
• /
• pp.101-110
• /
• 2001

This study is concern with the design of experiment planning for quality improvement in flow shop manufacturing system. In this study, the procedure of two stage experiment planning are proposed and applied to the manufacturing process of Li/$MnO_2$ batteries. The result of in this paper is that, compared with the current process conditions, 52% of the insulation inspection process, 81.6% of the first premier discharge process, 98.5% of the second premier discharge process, 84.7% of O.C.V./C.C.V. process, and 86.2% of voltage inspection process are decreased. After a given period of time, the life of the batteries extends to 75 hours, which means the 15% improvement in capacity. In case that the proposed methods are applied to the process Improvements of the flow shop manufacturing system, the much effected in experimental cost- saving and quality improvement.

• 경영과학
• /
• 제24권1호
• /
• pp.147-160
• /
• 2007

Six Sigma's concept has long been used as an effective way of restructuring the management process of a firm. In literature regarding Six Sigma, a number of successful cases were reported, where Six Sigma based management activities could enhance firm's strategic performance dramatically for year. However, there exist very few researches investigating the effect of Six Sigma on process innovation and quality improvement. Therefore this study propose a research model testing whether Six Sigma innovation could improve process innovation and quality improvement by industrial classification. We collected 332 valid questionnaires from expert in Six Sigma activities, and applied PLS. Empirical results showed that Six Sigma activities could contribute to process innovation and quality improvement.

• 산경연구논집
• /
• 제10권7호
• /
• pp.71-82
• /
• 2019

Purpose - This study aims to identify the priorities of medical service quality improvement by customer satisfaction characteristics and potential customer satisfaction improvement (PCSI) index based on the dualistic quality classification of Kano Model (1984) for Comprehensive Health Screeening Center in General Hospitals and Centers only for Comprehensive Health Screening and suggest a direction for future improvement. Research design, data, and methodology - Through advanced research on health screening medical service quality, this study set four service quality factors, including tangible, human, process and supportive factors, and 39 measurement items. Based on these items, the study used 117 questions, which consist of dualistic quality factors, customer satisfaction coefficients, positive and negative questions for PCSI index and questions for current satisfaction. 300 effective samples were collected for adults in their 20s who experienced health screening service in Seoul, Gyeonggi-do and Incheon within the past two years. Collected data were input in the quality evaluation duality table to categorize quality factors and calculate customer satisfaction coefficients by Timko(1993). The study also analyzed PCSI index in comparison with current satisfaction and identified priorities in quality improvement. Results - It was found that the most urgent factors to improve the quality in both groups were adequate waiting hours and emergency response for complications, which are process factors classified as unitary quality. It is urgently needed to improve the quality as the PCSI index was high in supportive factors (complaint response team) as attractive quality in Comprehensive Health Screening Center in General Hospitals and in process factors (prevention of infection) as unitary quality in Centers only for Comprehensive Health Screening. As the PCSI index was low in space use as a tangible factor, it was found that the current level can be maintained instead of improvement. Conclusions - To improve the health screening medical service quality, it is required to focus on process factors (adequate waiting hours, emergency response for complications, prevention of infection) and supportive factors (complaint response team) among service qualities perceived by users. It is proposed to ensure continuous efforts to manage and reinforce priorities as a direction for future improvement in health screening service.

• 한국정보처리학회논문지
• /
• 제6권10호
• /
• pp.2680-2692
• /
• 1999

Software quality is classified by quality of process and product. In experience of Quality Management, it is known that quality level of product as it depends on goodness and badness of process and organization. As a result, improvement of software process has been important subject. According as this trends, ISO 12207 is publicated as standard of software life cycle process by ISO. For UML based object oriented development process, it is necessary that we should research detailed definition of activity and task of ISO 12207 process which is added, deleted or tailored in according to organization and project characteristics. In this thesis, by according with ISO 12207 software life cycle process, UML based object oriented development process is proposed. This process is composed of 7 steps and 19 activities including development phase, activity and product to improve quality of reliability. Usefulness of object oriented process for improvement of software quality is proved at three ways, which are comparative analysis of process characteristics, SPICE process evaluation and SPICE rick analysis.

• International Journal of Quality Innovation
• /
• 제3권2호
• /
• pp.38-45
• /
• 2002

Continuous quality improvement is now the focus of research and application in quality engineering. To achieve continuous improvement, it's necessary to integrate quality tools and to plan, design and control the whole process of creating quality. Based on the extensive literature review and the philosophy of concurrent quality engineering, the paper analyzes the relationships among major quality tools such as QFD, FMEA, DOE and SPC and presents a basic model and structure for the integration of quality tools.

• 산업경영시스템학회지
• /
• 제11권18호
• /
• pp.7-15
• /
• 1988

This study is concerned with selecting mutually dependent quality improvement alternatives with resource constraints. These qualify improvement alternatives art different fro the tradition at alternatives which are independent from each other. In other words, selection of any improvement alternative requires other related specific improvement. Also the overall product quality in a multi stage manufacturing process is characterized by a complex multiplication method rather than a simple addition method which dose not allow to solve a linear knapsack problem despite its popularity in the traditional study. This study suggests a non-linear integer programming model for selecting mutually dependent quality improvement alternatives in multi-stage manufacturing process. In order to apply the model to selecting alternatives. This study also suggests a heuristic mode1 based on a dynamic programming model which is more practical than the non-linear integer programming model. The logic of the heuristic model enables 1) to estimate improvement effectiveness values on all improvement alternatives specifically defined for this study. 2) to arrange the effectiveness values in a descending order, and 3) to select the best one among the alternatives based on their forward and backward linkage relationships. This process repeats to selects other best alternatives within the resource constraints. This process is presented in a Computer programming in Appendix A. Alsc a numerical example of model application is presented in Chapter 4.

• 품질경영학회지
• /
• 제30권1호
• /
• pp.61-73
• /
• 2002

The Quality Function Deployment(QFD) is a Quality Management technique to maximize customers' satisfaction by reflecting customer requirements into all business processes, including concept definition, product planning, parts planning, process planning, production planning, and sales planning. The basic concept of the QFD is to translate customers' requirements appropriately into engineering characteristics, into parts characteristics, into process characteristics, and into specific requirements and activities in production. In this study, we reviewed and analyzed the application process of the QFD to the development of A2 FATC (Full Automatic Temperature Controller), an automotive component developed and produced by company A. It has been reported that by applying the QFD to the development of A2 FATC, company A. achieved 34% improvement in control robustness quality characteristic, 27% improvement in deviation quality characteristic, and 30% improvement in overall quality characteristics.

• 품질경영학회지
• /
• 제33권3호
• /
• pp.19-30
• /
• 2005

Recently many organization to become survival in changing marketplace, they must commit to implementing tools, systems, and quality management techniques. In this paper we develop process method of Team's problem-solving to reduce in failure costs. This paper suggest the step process how to measure quality cost reasonably that works in all types organizations. Or what is continuous improvement? Continuous improvement can be described as the continuous reduction of variation. Variation has many sources(machines, methods, materials, measurements, people, and environments) and cause(special & common in organization). As quality cost are not the answer to every organization financial, or quality-related problem, it's real results are designing & implementing quality cost system might be the answer.

• 한국경영정보학회:학술대회논문집
• /
• 한국경영정보학회 2007년도 International Conference
• /
• pp.582-587
• /
• 2007

ERP system is a good one because it provides required data to the Board of Directors at the right time, but needs to collect many data in this system. Nevertheless, increase in data leads to the system's quality deterioration which makes companies to carry out quality improvement. In order to solve quality deterioration problem, a company's quality improvement director must execute under acknowledgement of the relationships between sectors to be improved, which are DBMS, Application, System, Data Management, Archiving, and Reorganization. But in many cases, these relationships are ignored due to massive size of each of the sectors, resulting fragmental quality improvement operation. This case paper proposes a solution to effectively solve quality deterioration problem created by the massive data produced while operating ERP System(constructed by SAP package and web). First, it defines the sectors where quality improvements are vital, and lists out things to be considered. Then, by analysing the working process of these sectors, proposes the most efficient order of the improvement process. This case will eventually help the company's quality improvement director to execute quality improvement most effectively without trials and errors, which is this paper's ultimate goal.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.279-288
• /
• 2013

The purpose of this study is to present a case study of six sigma quality improvement practice in cooling fan motor(CFM) manufacturing processes. In this study, the CFM manufacturing process of automobile parts not relevant to the target process rate of the process point of view, in order to reduce the system to solve the problem of localized resolution procedures of six sigma DMAIC methodology was applied to study. In conclusion, this study's field D in order to improve the initial rate of inadequate quality management best practices by applying the method of Six Sigma quality CFM failure through stabilization schemes were proposed cost reduction.To be CFM product to satisfy customers based on continuous monitoring of the effective field of claims quality management system is required.