• 한국연초학회지
• /
• 제22권2호
• /
• pp.164-169
• /
• 2000

The reconstituted tobacco leaves(RTL) playa major part in the control of the low density and tar cigarette. Reconstituted tobacco manufactured by the papermaking process has much higher filling power than homogenized tobacco manufactured by slurry and rolling process. Fragile reconstituted tobaccos are liable to lead to small particles detrimental for filling power so they must be properly flexible. This work was conducted to determine the effect of CaCO$_3$ addition in paper-making process on the filling power and the flexibility of the reconstituted tobacco and to obtain the fundamental informations for improving the quality of domestic reconstituted tobacco. We analyzed the wood fiber species, the filler level, the fiber length, the fineness level and observed the surface of the RTL. From the obtained results, we could determine that foreign reconstituted tobacco was manufactured by blending softwood with hardwood and over 8% of calcium carbonate at the addition level. The domestic RTL has much higher fine fiber level by 23.2 % than that of foreign, so the refining treatment process and the condition must be reoptimized for the improvement of RTL quality.

• 한국주거학회논문집
• /
• 제27권6호
• /
• pp.137-144
• /
• 2016

In modular architecture, manufacturing drawing which includes whole information for modular unit production is essential since works for modular unit have to be performed in manufacturing factory not construction field. Although the manufacturing drawing is important as known it is insufficient to utilize the manufacturing drawing in modular architecture project and this makes modular unit low-quality with re-work and work time delay. To prevent low-quality modular unit caused by insufficient manufacturing drawing, in this research firstly manufacturing drawing's current situation and error cases in manufacturing phase of past modular housing project were analyzed, and correlation between reduction of errors occurance frequency and improving manufacturing drawing was verified. Secondly manufacturing drawing improvement factors were deducted in interior, furniture, mechanical work phase which errors' occurance rate is high and the way of deducting manufacturing drawing lists and contents were suggested with light-weight work as an example in case of new type of errors occurance. A series of research process can contribute to good-quality modular unit by errors reduction. As a result of research, about half of errors occurance can be reduced with suggested manufacturing drawing improvement factors. And the manufacturing drawing process can contribute to modular production which have uniform quality.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.149-169
• /
• 2020

Purpose: This study analyzes the characteristics of the Quality Management performed by SMEs in the Defense Industry in supply chains and analyzes the effect of the continuous improvement activities based on cooperation. Especially, for Military Supplies, the suitability of products is usually decided by judging their conformity to the specification, and from this structural characteristic, this study would analyze the structural relationship of systematic improvement activities with Supply Chain Quality Management(SCQM) and Business Performance(BP). Methods: Continuous improvement activities(CI) have significance as the driver force for the promotion of Quality Management. Thus, this study analyzed the causal relationships from the perspective of the process among CI, SCQM and BP. For an analysis of the structural characteristics and causal relationships among the constituents, AMOS was used, and 297 companies in the Defense Industry were utilized as samples. Results: It turned out that CI had significant impacts on Management Infra(MGT_Infra), Process Management(PM), Human Resources Management(HRM) and Communication(COMU) and had an indirect impact on the enterprises' financial performance through the parameters of HRM and Communication. Meanwhile, it turned out that between CI and non-financial performance, there was a direct effect, and there was also an indirect effect through the variables of the Management Infra and Communication. Conclusion: It turned out that CI had a positive effect on SCQM as a proactive driver and that they had significant relationships with BP(financial, Non-financial), both financial performance and non-financial performance. However, PM did not have a significant relationship of effect with BP because of the character appearing by the evaluation method of military supplies for the conformity to the specifications.

• 품질경영학회지
• /
• 제38권2호
• /
• pp.180-189
• /
• 2010

For the success of total six sigma innovation, it is necessary to improve the suppliers' quality in the supply chain. This paper presents the deployment and support system of six sigma innovation for supply chain quality improvement, with the application to an aerospace production company. The process of project selection, project implementation, financial effect verification, benefit sharing is presented. This paper will benefit the companies which are going to enhance all the companies in the supply chain via six sigma activities.

• 대한안전경영과학회지
• /
• 제15권2호
• /
• pp.243-253
• /
• 2013

This research paper introduces the application and implementation of medical decision metrics that classifies medical decision-making into four different metrics using statistical diagnostic tools, such as confusion matrix, normal distribution, Bayesian prediction and Receiver Operating Curve(ROC). In this study, the metrics are developed based on cross-section study, cohort study and case-control study done by systematic literature review and reformulated the structure of type I error, type II error, confidence level and power of detection. The study proposed implementation strategies for 10 quality improvement activities via 14 medical decision metrics which consider specificity and sensitivity in terms of ${\alpha}$ and ${\beta}$. Examples of ROC implication are depicted in this paper with a useful guidelines to implement a continuous quality improvement, not only in a variable acceptance sampling in Quality Control(QC) but also in a supplier grading score chart in Supplier Chain Management(SCM) quality. This research paper is the first to apply and implement medical decision-making tools as quality improvement activities. These proposed models will help quality practitioners to enhance the process and product quality level.

• 한국의료질향상학회지
• /
• 제8권2호
• /
• pp.218-231
• /
• 2001

Background : The purpose of this study was to investigate the understanding and the attitude of Korean hospital CEOs toward the healthcare quality improvement. Methods : A mailed questionnaire survey to the CEOs of hospitals with 400 beds or more was conducted between September 15 and October 30, 2000. Of the 108 hospitals eligible for the study, 58 participated, yielding a response rate of 54 percent. Result : The hospital CEOs have expressed that their hospital management was arduous job, and they had been pressured by increasing competitions among healthcare providers. They indicated that the low fees of health insurance made their hospital management difficult. The results also indicated that there was general consensus that the improvement of service quality was important in encouraging their organizations, but the investment of manpower and equipment ranked higher than the improvement of service quality. The majority of the CEOs have good understanding about quality improvement activities. However the facts that in general QI must be focused at the process of services and customer satisfaction, meanwhile quality improvement activities are helpful for the organizational productivity embarrassed them. The hospital CEOs responded that there were successful changes in terms of quality of care, patient satisfaction, and process efficiency after QI activities, but no increase in patient number and profit. Lack of understanding to QI activities and limited budget seem to attribute unsatisfactory outcomes. Conclusion : The majority of Korean hospital CEOs have a good understanding and attitude about QI activities. As mentioned in the result, despite of several limitations, several facts regarding the CEOs of hospital in Korean can be elucidated. (1) The general cognition of the QI project is relatively high, and it is accepted with positive concern, (2) the priority of the QI project, however, is not set higher than other projects and (3) the specific concepts of the actual QI project such as customer (patient)-focused work driving, the recognition of the work accomplishment, and the importance of rewards have not sufficiently understood.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2001년도 추계공동학술대회 논문자료집 정보화 젼략 패러다임의 변화에 대한 보기술의 대응
• /
• pp.133-135
• /
• 2001

• Journal of Multimedia Information System
• /
• 제4권1호
• /
• pp.19-26
• /
• 2017

The compression of video for both full HD and UHD requires the inclusion of extra vertical lines to every video frame, named as the DTV essential hidden area (DEHA), for the effective functioning of the MPEG-2/4/H encoder, stream, and decoder. However, while the encoding/decoding process is dependent on the DEHA, the DEHA is conventionally viewed as a redundancy in terms of channel utilization or storage efficiency. This paper proposes a block mode DEHA method to more effectively utilize the DEHA. Partitioning video block images and then evenly filling the representative DEHA macroblocks with the average DC coefficient of the active video macroblock can minimize the amount of DEHA data entering the compressed video stream. Theoretically, this process results in smaller DEHA data entering the video stream. Experimental testing of the proposed block mode DEHA method revealed a slight improvement in the quality of the active video. Outside of this technological improvement to video quality, the attractiveness of the proposed DEHA method is also heightened by the ease that it can be implemented with existing video encoders.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.61-65
• /
• 2004

As technique that can contribute in quality improvement in design process to overcome shortcoming of traditional quality control, call design or development department quality control activity that is achieved to reduce gun damage shuddering at circle minimizing change or side effect of product performance as off-line quality control. This paper discuss optimal process design of investment projects expansion and replacement investment on each line or individual in the production. Generally optimal plant design has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Robust design is presented, which may be effective to the processes appraisal or improvement. We propose that should make a optimal plant design model for reducing field failure rate to assign by real data on different factors in plant system. Using this model, robust design of taguchi method used in this comprehensive method for reducing field failure rate in plant system.

• 품질경영학회지
• /
• 제44권1호
• /
• pp.153-166
• /
• 2016

Purpose: Government quality assurance (QA) activities in Korea, which is carried out by the Defense Agency for Technology and Quality, is not effective due to 1) the obscureness of the QA implementation method, 2) the gap between QA activities of provisions and those conducted in the fields, and 3) the variation in subjective judgement among the QA personnel. The purpose of this paper is to propose some suggestions to enhance the effectiveness of government QA activities for military supplies in the production stage. Methods: QA activities for military supplies are investigated and problematic aspects are deduced for the production stage. To secure the effectiveness of the QA activities, Defense Contract Management Agency of the United Sates is benchmarked and five improvement methods are presented. Results: Five improvement aspects are 1) reflecting special terms and conditions of government mandatory inspection in contract, 2) classifying QA personnel, 3) making use of data collection and analysis template compulsory, 4) providing checklist for process review, and 5) establishing guidelines for sampling plans for product examination. Conclusion: Suggestions of this paper can lead to consistency and balance in government QA activities, reducing military suppliers' complaints and enhancing the effectiveness of QA effort, and ultimately contributing to the quality improvement of military supplies.