• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.2
• /
• pp.107-114
• /
• 2022

In order to classify 3D film images as right or wrong, it is necessary to detect the pattern in a 3D film image. However, if the contrast of the pixels in the 3D film image is low, it is not easy to classify as the right and wrong 3D film images because the pattern in the image might not be clear. In this paper, we propose a method of classifying 3D film images as right or wrong by comparing the width at a specific frequency of each histogram after obtaining the histogram. Since, it is classified using the width of the histogram, the analysis process is not complicated. From the experiment, the histograms of right and wrong 3D film images were distinctly different, and the proposed algorithm reflects these features, and showed that all 3D film images were accurately classified at a specific frequency of the histogram. The performance of the proposed algorithm was verified to be the best through the comparison test with the other methods such as image subtraction, otsu thresholding, canny edge detection, morphological geodesic active contour, and support vector machines, and it was shown that excellent classification accuracy could be obtained without detecting the patterns in 3D film images.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.65-78
• /
• 2008

In case of cut-slopes or shallow-depth tunnels, sliding along with discontinuities or rotation could play a critical role in judging stability. Although numerical analysis is widely used to check the stability of these cut-slopes and shallow-depth tunnels in early design process, common analysis programs are based on continuum model. Performing continuum model analysis regarding discontinuities is possible by reducing overall strength of jointed rock mass. It is also possible by applying ubiquitous joint model to Mohr-Coulomb failure criteria. In numerical analysis of cut-slope, main geotechnical properties such as cohesion, friction angle and elastic modulus can be evaluated by empirical equations. This study tried to compare two main systems, RMR and GSI system by applying them to in-situ hazardous cut-slopes. In addition, this study applied ubiquitous joint model to simulation model with inputs derived by RMR and GSI system to compare with displacements obtained by in-situ monitoring. To sum up, numerical analysis mixed with GSI inputs and ubiquitous joint model proved to provide most reliable results which were similar to actual displacements and their patterns.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.217-228
• /
• 2009

Data analysis applications typically aggregate data across many dimensions looking for unusual patterns in data. Even though such applications are usually possible with standard structured query language (SQL) queries, the queries may become very complex. A complex query may result in many scans of the base table, leading to poor performance. Because online analytical processing (OLAP) queries are usually complex, it is desired to define a new operator for aggregation, called the data cube or simply cube. Data cube supports OLAP tasks like aggregation and sub-totals. Many aggregate functions can be used to construct a data cube. Those functions can be classified into three categories, the distributive, the algebraic, and the holistic. It has been thought that the distributive functions such as SUM, COUNT, MAX, and MIN can be used to construct a data cube, and also the algebraic function such as AVG can be used if the function is replaced to an intermediate function. It is believed that even though AVG is not distributive, but the intermediate function (SUM, COUNT) is distributive, and AVG can certainly be computed from (SUM, COUNT). In this paper, however, it is found that the intermediate function (SUM COUNT) cannot be applied to OLAP cubes, and consequently the function leads to erroneous conclusions and decisions. The objective of this study is to identify some problems in applying aggregate function AVG to OLAP cubes, and to design a process for solving these problems.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.9
• /
• pp.11-19
• /
• 2009

A RAM-based Neural Net(RBNN) which has multi-discriminators is more effective than RBNN with a discriminator. Experience Sensitive Cumulative Neural Network and 3-D Neuro System(3DNS) that accumulate the features point improved the performance of BNN, which were enabled to train additional and repeated patterns and extract a generalized pattern. In recognition process of Neural Net with multi-discriminator, the selection of class was decided by the value of MRD which calculates the accumulated sum of each class. But they had a saturation problem of its memory cells caused by learning volume increment. Therefore, the decision of MRD has a low performance because recognition rate is decreased by saturation. In this paper, we propose the method which improve the MRD ability. The method consists of the optimum MRD and the matching ratio prototype to generalized image, the cumulative filter ratio, the gap of prototype response MRD. We experimented the performance using NIST database of NIST without preprocessor, and compared this model with 3DNS. The proposed MRD method has more performance of recognition rate and more stable system for distortion of input pattern than 3DNS.

• Environmental and Resource Economics Review
• /
• v.31 no.1
• /
• pp.113-139
• /
• 2022

The iron and steel industry is a manufacturing industry with the largest greenhouse gases emissions and has a great ripple effect on the national economy as a core material industry. This study internationally compared the decoupling patterns of greenhouse gases emissions in the iron and steel industry from 1990 to 2019, focusing on Korea, Japan, and Germany. In particular, unlike previous studies that considered only fuel combustion emissions, this study considered all fuel combustion emissions, industrial process emissions, and indirect emissions from the use of electricity and heat. As a result of the analysis, Korea is interpreted as expansive coupling, Japan as decoupling, and Germany as unclear. Therefore, the decoupling path that the Korean iron and steel industry should take should not be in Germany, but in the form of seeking a decoupling method similar to Japan or more effective than Japan. In addition, this study considered the characteristics of the iron and steel industry as much as possible and presented the causes of the decoupling analysis results and implications for the Korean iron and steel industry through comparison with Japan and Germany. In particular, four factors were suggested as factors which has promoted decoupling in Japan: high value-added of Japanese iron and steel products, development of energy efficiency technology in the Japanese iron and steel industry, strategic M&A of the Japanese iron and steel industry, and maintaining competitiveness according to the closed distribution structure of Japanese iron and steel products. The Korean iron and steel industry should also use the case of Japan as a benchmark to further increase added value through quality uprade and product diversification of iron and steel products, while at the same time making efforts to fundamentally reduce greenhouse gas emissions through the development of new technologies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.265-278
• /
• 2022

The global energy paradigm is rapidly changing by centering on carbon neutrality, and wind energy is positioning itself as a leader in renewable energy-based power sources. The success of onshore and offshore wind energy projects focuses on securing the economic feasibility of the project, which depends on securing high-quality wind resources and optimal arrangement of wind turbines. In the process of constructing the wind farm, the optimal arrangement method of wind turbines considering the main wind direction is important, and this is related to minimizing the wake effect caused by the fluid passing through the structure located on the windward side. The accuracy of the predictability of the wake effect is determined by the wake model and modeling technique that can properly simulate it. Therefore, in this paper, using WindSim, a commercial CFD model, the wake diffusion pattern is analyzed through the sensitivity study of each wake model of the proposed onshore wind farm located in the mountainous complex terrain in South Korea, and it is intended to be used as basic research data for wind energy projects in complex terrain in the future.

• Korea Science and Art Forum
• /
• v.30
• /
• pp.453-464
• /
• 2017

With the development of IT technology, various smart products and services have been spread in our daily life, providing users with convenience and emotional satisfaction. Particularly, input and output technologies, sensor technologies, and intelligent system technologies have offered new opportunities for diverse interaction patterns and new user experiences. This research started from the interest in the idea generation of product designers who need to combine various technological aspects with users' needs. The goal of this research is to propose an interaction design framework which can be used in an idea generation stage. To do so, first, the concept and characteristics of smart products were studied through literature reviews, and the interaction technologies, including input/output modality and context-aware technologies, were also investigated. Then, the frameworks that have been proposed in the deisgn fields were reviewed. This paper finally proposed the interaction design framework and explained its application to the idea generation, using several case studies. The proposed framework consists of four categories: product components, context-awareness elements, information input elements, and feedback output elements. Each of these are divided into several sub-categories, focused on users' needs. Sub-categories includes some elements of interaction, and each of the elements is explained with an existing smart product/system. The paper also describes how the proposed framework would be used in the idea generation process, using some design ideation examples. In the future study, more various concept ideas will be proposed through some elaborated case studies, and the framework is expected to be verified in terms of its possibility as an idea generation tool.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.723-734
• /
• 2008

In this paper, the problems and betterment plan in operating district units plan are studied by selecting typal case locations based on the types of district units plan of the city of Busan. According to the types, 4 locations of 'type of maintaining preexisting district' and 3 of 'type of managing preexisting district' are selected as case locations, based on a scale and characteristics of each location.In systematical aspects of the case locations, indiscreet upward adjustment of the locations, insignificant participation of the citizens and patternization were recognized as problems. And setting accurate standards for target and range of alteration in line with usage plan of the locations would be necessarily urgent. So through the analysing process of the problems arisen from the case locations I would suggests necessary solutions to improve the effectiveness of the district units plan. And In planning aspects, the similarity between the basic directions and the object, batch-application of the density plan, inadequacy of the usage plan, allocations and patterns of structures, and color planning were recognized to have problematic points. Consequently distinguished specific operating-guidelines would be necessary to achieve the basic directions and the object of district units plan. Furthermore, the building-to-land ratio and floor space index are needed to be exactly calculated through providing accurate and logical standards for appropriate development density of structures.

• Sim-seong Yeon-gu
• /
• v.30 no.1
• /
• pp.1-30
• /
• 2015

The Red Book contains C.G. Jung's insightful comment on life suggesting the thoughts of the Eastern philosophers, particularly that of Lao Zi. The author reviewed Jung's commentaries in the Red Book in comparison with Lao Zi Dao De Jing. Jung's comments on the image of despised Surpreme Being, on the Simplicity, the attitudes of 'the Spirit of the Depth' toward intellectual knowledges and speech, toward the small and the mockered one resemble to what Lao Zi spoke on Dao in his Dao De Jing. The 'good and evil' are regarded by both C.G. Jung and Lao Zi as two poles in one total psyche. The favorite words of Lao Zi : 'emptiness' or 'empty' are frequently mentioned in the Red Book. The investigation in this concern revealed that C.G. Jung, contrary to Lao Zi has applied the word 'emptiness' mostly as the opposite to the fullness. C.G. Jung's way of encountering with the darkest side of soul in the Hell and his bold confrontation to the authoritative person such as Philemon, above all, the intensity of his experiences in the state of the utmost tension between the opposites are extraordinarily impressive and somehow strange when regarded from traditional eastern way of behavior such as I-You relationship and the patterns of emotional life based on Confucian tradition. Confucius never talked about the prodigies, feasts of strength and disorders or spirits. Lao Zi never mentioned infernal cruelty. Noteworthy is however, both have enough experienced the cruelty of life and conflicts in the reality and what they spoke was not a process in search for solution but the final proposals for the solution of human agony. C.G. Jung was, like great shaman in central and East-Asia forced to go through inferno in his unique way and from these experiences obtained the insight which resembles not only to Lao Zi but also to wisdoms from the western philosophies and also from the Christianity.

• Journal of Life Science
• /
• v.34 no.7
• /
• pp.453-464
• /
• 2024

The fermentation of ganjang is known to be greatly influenced by the microbial communities derived from its primary ingredients, meju and sea salt. This study investigated the effects of changes in meju size on the distribution and correlation of microbial communities in ganjang fermentation, to enhance its fermentation process. Ganjang was prepared using whole meju and meju divided into thirds, and samples were collected at 7-day intervals over a period of 28 days for microbial community analysis based on 16S rRNA gene sequencing. At the genus level, during fermentation, ganjang made with whole meju exhibited a dominance of Chromohalobacter (day 7), Pediococcus (day 14), Bacillus (day 21), and Pediococcus (day 28), whereas ganjang made with meju divided into thirds consistently showed a Pediococcus predominance over the 28 days. Beta-diversity analysis of microbial communities in ganjang with different meju sizes revealed significant separation of microbial communities at fermentation days 7 and 14 but not at days 21 and 28 across all experimental groups. The linear discriminant analysis effect size (LEfSe) was determined to identify biomarkers contributing to microbial community differences at days 7 and 14, showing that on day 7, potentially halophilic microbes such as Gammaproteobacteria, Firmicutes, Oceanospirillales, Halomonadaceae, Bacilli, and Chromohalobacter were prominent, whereas on day 14, lactic acid bacteria such as Pediococcus acidilactici, Lactobacillaceae, Pediococcus, Bacilli, Leuconostocaceae, and Weissella were predominant. Furthermore, correlation analysis of microbial communities at the genus and species levels revealed differences in correlation patterns between meju sizes, suggesting that meju size may influence microbial interactions within ganjang.