• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1816-1819
• /
• 2003

As a result of milling operation, we expect to have burr at the outward edge of workpiece. Also, it causes undesirable problems such as deburring cost, low quality of machined surface, and bottleneck in manufacturing process. Though it is impossible to totally remove burr in machining, it is necessary to plan a machining process that minimizes the occurrence of burr. In this paper, a scheme is proposed which identifies the tool path of the milling operation with minimum burr. In the previous research, a Burr Expert System was developed where the feature identification, the cutting condition identification, and the analysis on exit burr formation are the key steps in the program. The Burr Expert System predicts which portion of workpiece would have the exit burr in advance so that we can calculate the burr length of each milling operation. Here, the critical angle determines whether the burr analyzed is an exit burr or not. So the burr minimization scheme becomes to minimize the burr with critical angle. By iterating all the possible tool paths in certain milling operation, we can identify the tool path with minimum burr.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.529-537
• /
• 2017

Membrane filtration process is an advanced water treatment technology that has excellently removes turbidity and microorganisms. However, it is known that it has problems such as low economic efficiency and the operating stability. Therefore, this study was to evaluate on the economical feasibility and operational stability comparison of membrane and sand filtration process in Im-sil drinking water treatment plant. For the economic analysis of each process, the electricity cost and chemical consumption were compared. In the case of electric power consumption, electricity cost is $68.67KRW/m^3$ for sand filtration and $79.98KRW/m^3$ for membrane filtration, respectively. Therefore, membrane filtration process was about 16% higher than sand filtration process of electricity cost. While, the coagulant usage in the membrane filtration process was 43% lower than the sand filtration process. Thus, comparing the operation costs of the two processes, there is no significant difference in the operating cost of the membrane filtration process and the sand filtration process as $85.94KRW/m^3$ and $79.71KRW/m^3$ respectively (the sum of electricity and chemical cost). As a result of operating the membrane filtration process for 3 years including the winter season and the high turbidity period, the filtrated water turbidity was stable to less than 0.025 NTU irrespective of changes in the turbidity of raw water. And the CIP(Clean In Place) cycle turned out to be more than 1 year. Based on the results of this study, the membrane filtration process showed high performance of water quality, and it was also determined to have the economics and operation stability.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.12
• /
• pp.909-918
• /
• 2018

Sports event is core product of sports business and the scale of sports event business is steadily increasing. For the successful operation of sports events, it is necessary to analyze the stackholder in stage according to the Function Area(FA) in the process of hosting / preparation / operation. This study is a study to define stakeholder by analyzing sports event process of sports events horizontally and vertically. This study consists of three categories : 1) investigation, 2) analysis and systematization of core processes, 3) analysis stakeholder. As a result of the analysis, the core stakeholders in the stage of hosting(bid) were analyzed as local organizations and committees including the promotion TF team, government organizations, domestic and foreign competition associations, national and international sports organizations (committees), and bid committees. Stakeholders in the stage of preparation / operation include stakeholders from organizational committees, various sports committees, international organizations and international organizations, governments and local governments, related companies and businesses, media, sponsors, donors or volunteers, athletes, teams and spectators.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.319.2-319
• /
• 2002

removal from operation of power units of nuclear stations in the various counties last decade the usual phenomenon. Good practice on a successful conclusion from operation of power units in Japan. USA is turned out. Germany, Russia and other countries. The features inherent in the Chernobyl atomic power station make this process especial, unique.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.674-680
• /
• 2005

The top spindle, end coupling and slipper metal are important components of the hot rolling process and are used for transmission of heavy rotational power. In this study, kinematic analysis is conducted using finite element method for hot rolling process under slipper metal combination types and operation situations. The structural analysis is performed by applying the combination type, rotational boundary condition of top spindle, end coupling and slipper metal. This study aims to minimize the mechanical problems which might happen in the production process.

• Journal of Wetlands Research
• /
• v.15 no.4
• /
• pp.453-460
• /
• 2013

Rural area sewage distribution rate is 40 % less than urban area. Previous research results announced that one of the reason in water resource pollution was caused of low rural area sewage distribution rate. Analysis on operation result of 11 RCSTP in Bong-hwa area which is located at the upper region of An-dong Dam and Im-ha Dam. Based on operation result, an analysis on characteristics of wastewater in Bong-hwa and treatment efficiency of installed treatment process was conducted. The wastewater influent of Bong-hwa contained high organic matter and nutrient than those of urban area. Treatment process showed totally stable treatment efficiency. But, The treatment efficiency for nutrient showed high fluctuation. This result means which is need to operation condition control of nutrient treatment when operating RCSTP.

• Transactions of Materials Processing
• /
• v.8 no.6
• /
• pp.541-553
• /
• 1999

Cold forging is a special type of forging process in which metal is forced to flow plastically under compressive force into a variety of shapes in room temperature. Gear blank, which is produced by cold forging, is concerned with the production method of transmission gear. Based on the results of simulation of the current four-stage process, the gear blank forging process for improving the conventional process sequence is designed. The rigid plastic finite element analysis for improving the conventional process. The new process consists of three stage operations with one annealing treatment after first operation. Based on the results of simulation of the proposed process, a required equipment could be selected. The new designed process appears to be more economical in producing the gear blank.

• Journal of Information Technology Applications and Management
• /
• v.15 no.1
• /
• pp.83-97
• /
• 2008

Today's competitive global market makes most enterprise endeavor to specialize their business areas, and co-operate with trading partners in supply chain by the forms of collaboration, information and business process sharing. However, even the supply chain plan generated by co-operation often fails to be executed successfully, because it was generated without capacities of suppliers and more over nested suppliers. To overcome this limitation, the supply chain plan of an enterprise should be generated truly integrated way. In this paper, we classify business patterns based on scenarios about quotation processing and supply chain planning in self-integrated environment. And we present business process models about four business patterns and describe them, which are classified by whether request for quotation includes information about price, required time periods, and quantity for each required time period and whether it is received from customer or sent to supplier. In addition, we describe the types of supply chain planning problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.669-675
• /
• 1991

Based on process analysis as well as extensive operation experience, two fuzzy expert control algorithms, for startup and control, are proposed for a supercritical fluid extraction process which has high interacting multivariable structure. In the proposed algorithms, a new simple defuzzification method which only requires four fundamental arithmetic rules is also presented. Through numerical simulations, control performance using the proposed control algorithm is compared with that of a different fuzzy algorithm by an other researcher and that of conventional PID-type controllers which are tuned by well-known optimal criteria. Also, the proposed control algorithm has been tested to the bench scale supercritical fluid extraction process. As a consequence, the proposed fuzzy expert controller has shown fast and robust control performance while the other controllers show sluggish and/or highly oscillatory responses.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.76-83
• /
• 2001

In this study, the static and dynamic characteristics of turning process was modelled and the analytic realization of regen-erative chatter mechanism was discussed. In this regard, we have discussed on the comparative assessment of recursive times series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision turning operation. In this study, simulation and experimental work were performed to show the malfunction behaviors. For this purpose, new Recursive Extended Instrument Variable Method(REIVM) was adopted for the on-line system identification and monitoring of a machining process. Also, we can apply REIVE algorithms in real process for the detection of chatter frequency and dynamic property and analyze the stability lobe of the system by changing a parameter of cutting dynamics in regenerative chatter mechanics, if it is stable or unstable, Also, The stability lobe of chatter was analysed.