• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.125-135
• /
• 1993

The safe and efficient operation of nuclear plants is recognized to be accomplished through the application of plant automation using digital technology, which is one of main targets of the next generation nuclear plants. For plant level automation, it is first required that each major subsystem be digitalized, and the steam generator water level control system is discussed in this study. The transfer functions between inputs and the level are derived by employing the thermal hydraulic model of the steam generator and are applied to the analysis of the current three-element control system. Since the control scheme in this study includes the steam generator itself as a process plant, the system order is high and the numerical instability arises in digitalizing. Together with this, the unreliability of the feedwater feedback signal at low power level leads to the proposal of a two-element control system with a proper digital controller. The digital PI controller developed for this system has the initial power adaptive gain and integration time constant. And it makes the overall system response satisfy the stability and other necessary control specifications simultaneously. Since the two-element control system using this controller depends on the initial power only, it is simple to define and it shows a similar level response behavior to that of its corresponding analog system.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.201-214
• /
• 2020

This study aimed to early detect damaged trees by pine wilt disease using the vegetation indices of UAV images. The location data of 193 pine wilt disease trees were constructed through field surveys and vegetation index analyses of NDVI, GNDVI, NDRE and SAVI were performed using multi-spectral UAV images at the same time. K-Means algorithm was adopted to classify damaged trees and confusion matrix was used to compare and analyze the classification accuracy. The results of the study are summarized as follows. First, the overall accuracy of the classification was analyzed in order of NDVI (88.04%, Kappa coefficient 0.76) > GNDVI (86.01%, Kappa coefficient 0.72) > NDRE (77.35%, Kappa coefficient 0.55) > SAVI (76.84%, Kappa coefficient 0.54) and showed the highest accuracy of NDVI. Second, K-Means unsupervised classification method using NDVI or GNDVI is possible to some extent to find out the damaged trees. In particular, this technique is to help early detection of damaged trees due to its intensive operation, low user intervention and relatively simple analysis process. In the future, it is expected that the utilization of time series images or the application of deep learning techniques will increase the accuracy of classification.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.253-259
• /
• 2004

The sheetwise cadastral map data needs to become a Serial Cadastral Map (SCM) database for the promotion of the reliability of cadastral surveying, for the efficient operation of the Parcel Based Land Information System, and for the convenient use of land information as well. A large amount of money and time are required for the editing process of producing SCM DB in accordance with the $\ulcorner$Guideline for the Production of Serial Cadastral Maps$\lrcorner$ by the Ministry of Construction & Transportation if any of field surveying techniques is accompanied by. In addition, a boundary line that extends to a neat line does not meet the counterpart of the neighboring map sheet at a point. Such cases frequently occur and are much dependent upon the decisions of individuals in charge of editing or inspecting. The core processes of the research, firstly overlay SCM produced by the edition of the sheetwise cadastral maps with Autodesk Map on orthophoto images, secondly adjust the parcel boundaries which are delineated over more than one map sheet, and lastly compare the original boundary coordinates and areas with the corresponding adjusted ones and calculate root mean square errors (RMSEs). The research aims at promoting the quality of SCM by minimizing the inconsistency of parcel boundaries by means of the comparative analysis of the calculated RMSEs.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.5
• /
• pp.11-19
• /
• 2017

The purpose of this study is to analyze the efficiency of PV according to installation condition in the complex type buildings. For this purpose, annual performance of solar power generation in a certain area was investigated and various methods were conducted including post operation evaluation. In addition, we tried to find out influencing factors that affect the efficiency and sought to identify their relative impact of degree through the data analysis and site visits together. In the middle of this process we can draw up major considerations for the efficient photovoltaic power generation installation. In the mean while, previous studies are making something new related with method for efficiency enhancement and individual influential factors based on experimental environment rather than the empirical data site based. As a result of the study, it was confirmed that even if installed in the same area, the power generation efficiency is 1.5 times as high as the installation condition. Furthermore, statistical analyses were performed on azimuth, tilted angle and shade, which are variables affecting conversion efficiency, and it was statistically confirmed that all variables are meaningful factors that affect the conversion efficiency which is a dependent variable. The most influential factor is the azimuth, followed by the tilted angle and the shade factor. From this result, we expect to be able to provide installation guidelines for the solar power generation equipments on the rooftop zone.

• Journal of Educational Research in Mathematics
• /
• v.23 no.3
• /
• pp.373-388
• /
• 2013

This paper is to investigate how two elementary school teacher's belief mathematics as educational content, and teaching and learning mathematics as a part of educational methodology, and what the two teachers believe towards gifted children and their education, and what the classes demonstrate and its effects on the sociomathematical norms. To investigate this matter, the study has been conducted with two teachers who have long years of experience in teaching gifted children, but fall into different belief categories. The results of the study show that teacher A falls into the following category: the essentiality of mathematics as 'traditional', teaching mathematics as 'blended', and learning mathematics as 'traditional'. In addition, teacher A views mathematically gifted children as autonomous researchers with low achievement and believes that the teacher is a learning assistant. On the other hand, teacher B falls into the following category: the essentiality of mathematics as 'non-traditional', teaching mathematics as 'non-traditional, and learning mathematics as 'non-traditional.' Also, teacher B views mathematically gifted children as autonomous researchers with high achievement and believes that the teacher is a learning guide. In the teacher A's class for gifted elementary school students, problem solving rule and the answers were considered as important factors and sociomathematical norms that valued difficult arithmetic operation were demonstrated However, in the teacher B's class for gifted elementary school students, sociomathematical norms that valued the process of problem solving, mathematical explanations and justification more than the answers were demonstrated. Based on the results, the implications regarding the education of mathematically gifted students were investigated.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.3
• /
• pp.199-206
• /
• 2013

Electrowinning process in pyroprocessing recovers U (uranium) and TRU (Trans Uranium) elements simultaneously from spent fuels using a liquid cadmium cathode (LCC). When the solubility limit of U deposits over 2.35wt% in Cd, U dendrites were formed on the LCC surface during the electrodeposition at $500^{\circ}C$. Due to the high surface area of dendritic U, the deposits were not submerged into the liquid cadmium pool but grow out of the LCC crucible. Since the U dendrites act as a solid cathode, it prevents the co-deposition of U and TRUs. In this study, the electrodeposition of U onto a LCC was carried out at 440 and $500^{\circ}C$ to compare the morphology and component of U deposits. The U deposits at $440^{\circ}C$ have a specific shape and were stacked regularly at the center of the LCC pool, while the U dendrites (i.e., ${\alpha}$-phase) at $500^{\circ}C$ were grow out of the LCC crucible. Through the microscopic observation and XRD analysis, the electrodeposits at $440^{\circ}C$, which have a round shape, were identified as an intermetallic compound such as $UCd_{11}$. It can be concluded that the LCC electrowinning operation at $440^{\circ}C$ achieves the co-recovery of U and TRU without the formation of U dendrites.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.438-444
• /
• 2011

Purpose: Adipose-derived stromal cells (ASCs) are readily harvested from lipoaspirated tissue or subcutaneous adipose tissue fragments. The stromal vascular fraction (SVF) is a heterogeneous set of cell populations that surround and support adipose tissue, which includes the stromal cells, ASCs, that have the ability to differentiate into cells of several lineages and contains cells from the microvasculature. The mechanisms that drive the ASCs into the osteoblast lineage are still not clear, but the process has been more extensively studied in bone marrow stromal cells. The purpose of this study was to investigate the osteogenic capacity of adipose derived SVF cells and evaluate bone formation following implantation of SVF cells into the bone defect of human phalanx. Methods: Case 1 a 43-year-old male was wounded while using a press machine. After first operation, segmental bone defects of the left 3rd and 4th middle phalanx occurred. At first we injected the SVF cells combined with demineralized bone matrix (DBM) to defected 4th middle phalangeal bone lesion. We used P (L/DL)LA [Poly (70L-lactide-co-30DL-lactide) Co Polymer P (L/DL)LA] as a scaffold. Next, we implanted the SVF cells combined with DBM to repair left 3rd middle phalangeal bone defect in sequence. Case 2 was a 25-year-old man with crushing hand injury. Three months after the previous surgery, we implanted the SVF cells combined with DBM to restore right 3rd middle phalangeal bone defect by syringe injection. Radiographic images were taken at follow-up hospital visits and evaluated radiographically by means of computerized analysis of digital images. Results: The phalangeal bone defect was treated with autologous SVF cells isolated and applied in a single operative procedure in combination with DBM. The SVF cells were supported in place with mechanical fixation with a resorbable macroporous sheets acting as a soft tissue barrier. The radiographic appearance of the defect revealed a restoration to average bone density and stable position of pharyngeal bone. Densitometric evaluations for digital X-ray revealed improved bone densities in two cases with pharyngeal bone defects, that is, 65.2% for 4th finger of the case 1, 60.5% for 3rd finger of the case 1 and 60.1% for the case 2. Conclusion: This study demonstrated that adipose derived stromal vascular fraction cells have osteogenic potential in two clinical case studies. Thus, these reports show that cells from the SVF cells have potential in many areas of clinical cell therapy and regenerative medicine, albeit a lot of work is yet to be done.

• Journal of Korea Water Resources Association
• /
• v.46 no.5
• /
• pp.519-530
• /
• 2013

To provide a reliable tool for runoff simulations of ungauged watersheds upstream of reservoirs, a daily runoff simulation model, Tank model, is restructured, the parameter regionalization of the model is conducted, and the model's applicability is evaluated. Taking into account the characteristics of runoffs from the watersheds, a three-tank model is employed. The percolation process of the model's third tank is eliminated, considering the water budgets of the watersheds, and its evapotranspiration component is improved, reflecting the conditions of meteorological observation in South Korea. The sensitivity analysis of the model shows that the model's behaviors, varying with a sensitive parameter, ${\alpha}$, are reasonable. The regional parameter estimation equations are determined, using the characteristics and land uses of the watersheds as variables. The model is applied for the runoff simulations of three watersheds and the water stage simulation of one reservoir, and the simulation results are then compared with the observed values, which prove to be in close agreement with the observations. In addition, the results from simulating inflows of twenty-four reservoirs using the model show that the averages of evapotranspiration rate and runoff rate are 42.8% and 56.6%, respectively, which are resonable. Consequently, it is concluded that the model is practically applicable to simulating runoffs from watersheds upstream of reservoirs, and simulated inflow data are useful for watershed management and reservoir planning, design, and operation.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.4
• /
• pp.399-407
• /
• 2001

Objectives : To investigate the current status of hospital-based health promotion programs in Korea and to elucidate the factors which affect to the process of implementation. Methods : We conducted a mail survey of all 875 hospitals in Korea from March to May 2001. In reference to 12 specific kinds of health promotion programs, hospital CEOs were asked whether their hospital have such programs, whether they are fully staffed and whether the program is paid for by the patients. Contextual factors(location, hospital type, number of beds, length of operation, public/private status, economic level of the community, the level of competition) and organizational factors (the extent of market, compatibility with vision, formalization), strategic types of the CEOs (defender/analyser/prospector) were also surveyed. The relationships between each variable and the implementation of health promotion services, activation of services, and the target groups(patient/community resident) were analyzed by univariate analysis and the independent effects of these variables were examined with multiple logistic regression. Results : 100 of 125 hospitals responding (84.8%) had mere than one health promotion program. However, they showed fluctuations in the adoption rate of each programs, meaning that comprehensive health promotion services were not provided. Many programs were not fully staffed and few hospitals had paid programs. In factors affecting health promotion service implementation, private hospitals showed a higher rate in implementation than public hospitals. In contrast, when the competition among nearby hospitals was intense, the level of implementation of service lowered. In the strategic type of the CEOs, the prospectors were shown to have instituted more health promotion programs in their hospitals and the analysers had a greater tendency to have programs for community residents than the defenders. Conclusion . Considering the above results, contextual factors may contribute greatly to the introduction of health promotion services in Korean hospital, although the CEO's personal preference and organizational factors play a larger role in the activation of services. Additionally, the CEO's personal preference may be the major influencing factor in the introduction of programs for community residents.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.87-92
• /
• 2019

The purpose of this study is to investigate the preparation time of fire-fighting water for public fire hydrants and ground, underground fire hydrants. The equipment preparation time for stage 1 was 20.50 seconds for ground type and 24.67 seconds for underground type. The reason for this difference in preparation time is that an underground fire hydrant requires additional standpipes to connect to the main conduit of Paru and the underground hydrant, which open the manhole cover. Water tank Maintenance joint with water hose male coupling of the second stage was similar to that of the ground type of 48.50 seconds and underground water tipe of 49.00 seconds. This is because the operation of connecting the fire hose to the maintenance tank of the water tank car is the same. In the third stage, the water pipe connection was 43 seconds for ground type and 174.33 seconds for underground type. The reason why the time for connecting the water pipe to the fire hydrant is large difference is that the underground fire hydrant is opened by opening the manhole cover, After connecting the stand pipe to the fire hydrant, the additional process of connecting the water pipe to the stand pipe is required, which is considered to have greatly increased the time required. The opening of Water Control Valve and spindle Valve in the fourth stage was 66.50 seconds for the ground type and 78.83 seconds for the underground type. This difference is due to the fact that the spindle of the ground fire hydrant is located on the main body and can be easily opened, but the underground type is located next to the main body under the manhole and requires additional time to connect the opening equipment.