• Journal of The Korean Association For Science Education
• /
• v.22 no.3
• /
• pp.422-431
• /
• 2002

Because of the gap between the cognitive levels of the students and the curricular materials for the students to understand, the secondary school students feel science difficult and they get to avoid science as they go up to the higher grade. So it is absolutely needed to take the active measures to improve the cognitive development of the students through some special programs stimulating their cognitive process. This study investigated the effects of thinking science activity program devised for cognitive acceleration of the students. After implementing thinking science program to 181 7th grade students, the effectiveness of this program was examined through the analysis of covariance of both experimental and control groups. The result of the study showed that the cognitive level of the students in experiment group dealt with thinking science program was more accelerated than that of the students in control group who were just taught regular science curriculum. Especially, the effect was clear to the students in stages 1 and 2B. It was also found that the percentage of the students who promoted from concrete operational stage to formal operational stage was higher in experimental group than in control group. The results of the study implied that cognitive acceleration of the students might be possible through the specially designed materials such as thinking science program.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.57-71
• /
• 2016

The development of ocean industries is an existing and important problem for South Korea, which is mostly surrounded by sea and has a long coastline along three seas. It is necessary for researchers to make efforts to enhance its cost and time competitiveness, because many ocean-based activities have been carried out in harsh physical conditions when compared with land-based ones. One of these efforts to improve efficiency is to operate an Offshore Supply Base (OSB), which is a basic infrastructure required to develop ocean industries effectively. For this reason, the construction and operation of OSBs have become an issue in Korea. The relevant research is limited. Nevertheless, there are a few reports published by Korean research institution. They focus on promoting ocean industries and only mention the necessity of OSB as a promotion tool for the industries. This study on the other hand, addresses various issues on the construction of OSBs in Korea and suggests implications for them. To examine the conditions on the construction of OSBs in Korea, we conduct case studies of Houston and Singapore, the representative regions where a massive OSB has been constructed and operated. In addition, we use Analytic Hierarchy Process (AHP) to evaluate the relative priorities of the services provided by OSBs if constructed in Korea.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.289-298
• /
• 2014

Recently, the traditional paradigm in railroad technology is changing as more efficient and cost-effective electric vehicle (EV) technologies have emerged. The original concept of PRT (Personal Rapid Transit) proposed in the past has come to be regarded as unrealistic, but its feasibility is improving through the utilization of an EV platform. In particular, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. However, based on the inductive power transfer (IPT) technology, the fast charging of supercapacitors with high energy density can contribute to overcoming this technical challenge and promote the transition to electric-powered ground transportation by improving the appearance of cities. This study discusses the development process of a power supply system for PRT, including concept design, numerical analysis, and device manufacturing, along with performance predictions and evaluations. In terms of results, the system was found to meet the performance requirements for power supply modules on a test-bed.

• Journal of the Korean association of regional geographers
• /
• v.8 no.3
• /
• pp.314-325
• /
• 2002

The aims of this study is to find the facts of regional inequality and to suggest the desirable location of educational facilities and its related policies through the analysis of the distributional characteristics of high schools in Daegu viewing from public service facilities. The results are as follows. As of 2000 year, there are 76 high schools in operation in Daegu. The number of private high schools is more than that of national public ones in terms of their founders, and the number of general high schools outnumbers that of vocational high schools by their operational types. As a whole, the distribution of schools in Daegu is closely related to the population distribution(redistribution). In case of high schools, it shows that there is severe unevenness between demand and supply of educational facilities per district. The regional inequality of school facilities is getting worse by transfer and new establishment; inter-district transfer is mainly caused by the redistribution of population while intra-district transfer is accelerated by the pressure on better use of land. Recently there is a tendency that schools are newly established by public sector(national public schools) rather than by private sector(private schools). And the predilection or avoidance of a certain area in the process of choosing the site for transfer or new establishment of schools lead to inequality of education opportunities per district. In conclusion, the educational facilities should firstly be placed in the practice of public service facilities in terms of public welfare as well as the convenience of residents and regional inequality. Consequently, both construction of new high schools and the relocation of existing high schools have to be further activated. To achieve them, the role of public actions is particularly more important than that of private ones.

• The Journal of Fisheries Business Administration
• /
• v.35 no.2
• /
• pp.91-115
• /
• 2004

The main purpose of this study is to analyze the cooperative squid fisheries problems surrounding the $E128^{\circ}$, established by the 1965 Korea - Japan Fisheries Agreement which banned Korean large trawlers' fishing east to the $E128^{\circ}$ In fact, the moratorium was put on by Japans request. However, such issue did not occur until the filefish stock in the southern Korean sea, which was a major target fish species of the large trawl fisheries, The filefish stock collapsed completely around 1991 and at the same time most of bottom fish stocks in the East China Sea began to show a symptom of over - exploitation. Thus, the off - shore large trawlers learned to have a little opportunity of finding out alternative fish stocks as well as fishing grounds. Fortunately, at that time squid resource stock and consumption were on the increasing trend. The large trawl fisheries were able to economically exploit squid stock east to the $E128^{\circ}$ through cooperative fishing with squid angling light boats in the East and East - South Sea, even though such cooperative fishing activities violate the existing fishery laws apparently. Some important reasons that the large trawlers have continued the cooperative fishing seem to be because (ⅰ) squid resource stock has been on the increasing state over time, (ⅱ) the trawl fisheries have made a significant contribution to meeting domestic and export demands and stabilizing squid prices, and (ⅲ) they have kept domestic squid market from foreign competition. However, the new Korea - Japan fisheries agreement in 1998 provided a momentum of questioning the effectiveness of the $E128^{\circ}$ by the squid - related fisheries other than the squid angling. Serious conflicts between squid - related fisheries began to emerge and to be much intensified. Squid angling industries in the East opposed to large trawlers's efforts to formalize such illegal cooperative squid fishing activities. Their main argument was that such formalizing would definitely make the East coast squid prices lower and in turn their business performance would be worse off. The results of quantitative analysis suggest that the trawlers' massive landing may have a significant influence on lowering the east coast squid prices. Now, an important issue that the squid - related fisheries and the government are facing is to solve such complex squid fishing problems through a multi - participatory negotiation process, including price stabilization, total allowable catch level and its operation schemes, $E128^{\circ}$ rearrangement, and so on.

• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.131-144
• /
• 2015

Purpose: This study set out to propose plans for more efficient and effective clinical practice by investigating the current state of clinical practice in the field of dental technology and thus provide basic data to develop pre- and post-education programs for clinical practice. Methods: The subjects include dental technicians at dental technical laboratories that were appointed as the place of clinical practice by the Department of Dental Technology of G University. The survey period spanned from December 22, 2014 to January 20, 2015. Total 250 questionnaires were distributed to them, and 190(76.0%) were returned. After excluding 23 whose answers were uncertain or seemed to lack reliability, total 167(66.8%) were used in final analysis. Results: 1. The most frequent practice the student did during clinical practice was articulator attachment, which was followed by pin operation or model making, one's own task and practice, sand and crow sculpturing, burying, casting, and grinding. 2. In case of going through the entire process, porcelain had the most students at 39(23.4%), being followed by crown & bridge at 28(16.8%), clinical model at 23(13.8%), full denture at 17(10.2%), and partial denture at 17(10.2%) in the order. 3. Of the students, 59.8%(30.5% for reinforced basic practice; 29.3% for intensive practice education) said that intensive practice education should be reinforced in school; and 22.3% said that intensive theory and practice education was needed, which indicates that 82.6% voiced their opinion of reinforcing education around practice. 4. The students felt that they lacked diligence, passion, and theoretical knowledge somewhat and were relatively good at clinical adaptation and operational skills. Conclusion: The findings show that the students felt an absolute lack of practice education as the school education was focused on theory and national exams in the field of dental technology, thus raising a need to reinforce practice education. Of all the respondents, 62.9% said there was a need to improve the current education with a focus on jobs. In future, education of dental technology should work to bring up able dental technicians that can perform in clinical dental technology right after graduation by reinforcing job-based practice education.

• Clean Technology
• /
• v.20 no.4
• /
• pp.398-405
• /
• 2014

In the treatment of spent high energetic materials, the issues such as environmental pollution, safety as well as working capacity should be carefully considered and well examined. In this regard, incineration has been recommended as one of the most promising processes for the disposal of such explosives. Due to the fact that high energetic materials encompass various types and their different characteristics, the technology development dealing with various materials is not an easy task. In this study, rigorous modeling and dynamic simulation was carried out to predict dynamic physico-chemical phenomena for research department explosive (RDX). Plug flow reactor was employed to describe the incinerator with 263 elementary reactions and 43 chemical species. Simulation results showed that safe operations can be achieved mainly by controlling the reactor temperature. At 1,200 K, only thermal decomposition (combustion) occurred, whereas increasing temperature to 1,300 K, caused the reaction rates to increase drastically, which led to ignition. The temperature further increased to 3,000 K which was the maximum temperature recorded for the entire process. Case studies for different operating temperatures were also executed and it was concluded that the modeling approach and simulation results will serve as a basis for the effective design and operation of RDX incinerator.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.64-77
• /
• 2015

An effective method for produce munitions effectiveness data is to calculate weapon effectiveness indices in the US military's Joint Munitions Effectiveness Manuals (JMEM) and take advantage of the damage evaluation model (GFSM) and weapon Effectiveness Evaluation Model (Matrix Evaluator). However, a study about the Range Safety that can be applied in the live firing exercises is very insufficient in the case of ROK military. The Range Safety program is an element of the US Army Safety Program, and is the program responsible for developing policies and guidance to ensure the safe operation of live-fire ranges. The methodology of Weapon Danger Zone (WDZ) program is based on a combination of weapon modeling/simulation data and actual impact data. Also, each WDZ incorporates a probability distribution function which provides the information necessary to perform a quantitative risk assessment to evaluate the relative risk of an identified profile. A study of method to establish for K-Range Safety data is to develop manuals (pamphlet) will be a standard to ensure the effective and safe fire training at the ROK military education and training and environmental conditions. For example, WDZs are generated with the WDZ tool as part of the RMTK (Range Managers Tool Kit) package. The WDZ tool is a Geographic Information System-based application that is available to operational planners and range safety manager of Army and Marine Corps in both desktop and web-based versions. K-Range Safety Program based on US data is reflected in the Korean terrain by operating environments and training doctrine etc, and the range safety data are made. Thus, verification process on modified variables data is required. K-Range Safety rather than being produced by a single program, is an package safety activities and measures through weapon danger zone tool, SRP (The Sustainable Range Program), manuals, doctrine, terrain, climate, military defence M&S, weapon system development/operational test evaluation and analysis to continuously improving range safety zone. Distribution of this K-range safety pamphlet is available to Army users in electronic media only and is intended for the standing army and army reserve. Also publication and distribution to authorized users for marine corps commands are indicated in the table of allowances for publications. Therefore, this study proposes an efficient K-Range Safety Manual producing to calculate the danger zones that can be applied to the ROK military's live fire training by introducing of US Army weapons danger zone program and Range Safety Manual

• International Commerce and Information Review
• /
• v.14 no.4
• /
• pp.387-408
• /
• 2012

This paper have examined the descriptive and legal approaches to the comparison and analysis of major content of direct transport in FTA rules of origin and the primary judicial precedents that arose during the executing process of FTAs. Preferential tariff treatment shall be applied to a good satisfying the requirement of this agreement(annex, article etc.,) and which is transported directly between the territories of the exporting party and importing party. However, products may be transported through territories of non-parties, provided that they do not undergo operations other than unloading, reloading, splitting-up of consignments or any operation designed to preserve them in good condition. During this period the products shall remain under customs control in the country of transit. The low perception of firms on the rules of origin was found to lead to breaking the rule and thus taking up losses. The FTA major countries enacted penalty rules against the violation of the rules of origin and bring civil and criminal suits and administrative sanctions. The types and level of penalties are subject to their domestic laws of each of those nations. With better recognition of major content of direct transport in FTA rules of origin and well-prepared countermeasures, firms will be able to enhance competitive advantage while benefiting from preferential tariffs.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.1
• /
• pp.75-83
• /
• 2008

We propose a welfare interface using multiple fecial features tracking, which can efficiently implement various mouse operations. The proposed system consist of five modules: face detection, eye detection, mouth detection, facial feature tracking, and mouse control. The facial region is first obtained using skin-color model and connected-component analysis(CCs). Thereafter the eye regions are localized using neutral network(NN)-based texture classifier that discriminates the facial region into eye class and non-eye class, and then mouth region is localized using edge detector. Once eye and mouth regions are localized they are continuously and correctly tracking by mean-shift algorithm and template matching, respectively. Based on the tracking results, mouse operations such as movement or click are implemented. To assess the validity of the proposed system, it was applied to the interface system for web browser and was tested on a group of 25 users. The results show that our system have the accuracy of 99% and process more than 21 frame/sec on PC for the $320{\times}240$ size input image, as such it can supply a user-friendly and convenient access to a computer in real-time operation.