• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.92-93
• /
• 2006

In recent time there are vigorous requirement for the use of thick steel plate in various industrial fields including shipbuilding industry. Application of TMCP steel plates, especially, is increase progressively. As a welding process for thick steel plate assembly high heat input welding method is used. However, HAZ softening of TMCP steel plates has a possibility to reduce the strength of welded joint. In this study, therefore, tensile strength of TMCP welds had softened HAZ was examined using numerical calculation and experiment.

• 오토저널
• /
• 제6권2호
• /
• pp.1-6
• /
• 1984

복잡한 연소과정의 예측을 위한 이론적인 연구는 Gosman, Spalding, Patankar등의 수치해석방 법을 이용하여 진행된 것들이 많다. 현재 이분야에 응용되는 일반적인 Program으로는 Boundary Layer Type의 방정식을 이용한 One-Dimensional Program (GENMIX 4, Revised GENMIX) 등이 있으나 Parabolic Type이므로 주방향에 수직된 방향으로 동일한 값이 2개 이상 존재할 수 있는 Elliptic현상을 설명하기에는 어려움이 있다. 그러므로 비록 기억용량(Computation Storage) 및 계산시간(Running Time)에 불리한 점이 있기는 하나 Elliptic상황을 해석해야만 할 경우가 있다. 본 해설은 Patankar의 Elliptic "SIMPLE" Program을 연소 해석과정에 이용되는 방법을 간단한 연소과정의 예로서 설명하는 것으로 연소과정의 연구보다도 Program의 응용성에 중점을 두었다. 따라서 실제의 물리적인 연소 mechanism에서 많은 가정을 도입하여 문제를 단순화 시켰으며 실제의 연소문제에 충분한 접근을 위해서는 turbulence-modeling과 radiation heat flux가 본 해설에 덧붙여져서 논의되어야 한다. 논의되어야 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.940-945
• /
• 1998

Recently, serious cracking problems have been reported in this country while the process of actual massive concrete construction. he hydration heat arising from the chemical reaction of cement with water causes temperature differentials in between inside and outside of a structural member, and these temperature differentials induce thermal stresses. In this paper, we described on the practical application and quality control of the mass concrete mixed with fly-ash. This project is investigating adiabatic temperature rise test of concrete, mock-up test in the laboratory, ad B/P before placing the mass concrete in site. As a result, we can be prevent temperature cracking from the cement hydration heat of mass concrete and also can be showed up secure quality control flow chart of mass concrete.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.406-411
• /
• 2003

This paper deals with the effect of laser material processing on the EMU production technique. Material processing with lasers takes advantage of all the characteristics of laser light. The high energy density and directionality achieved with lasers permits strong localized heat- or photo-treatment of materials with spatial resolution below one micrometer. The pulsed and mono-chromatic light allows the control of depth of heat treatment or selective excitation. The laser beam can be moved to process large areas, is a sterile tool and is no subject to wear and tear. Using laser processing have taken more interests in EMU production for improving the rigidity, weight reduction, crash durability, and cost savings so that their application to auto-bodies has been increased.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.25-32
• /
• 1998

The forced cooling system is designed to shorten the overhaul time of steam turbine, which is important in view of economic concern of utility companies, Forced cooling of the hot turbine is achieved by suction of air flow into the turbine after the turbine shuts down. The heat transfer process by suction of air flow can cause thermal stress due to the thermal gradients. In this paper, the analysis of heat transfer is performed to calculate the air flow rate. Based on the prediction of cyclic fatigue damage and the experience, the cooling equipment is designed for shortening the cooling time of steam turbine.

• International Journal of Computer Science & Network Security
• /
• 제22권12호
• /
• pp.178-184
• /
• 2022

Renewable energy sources based on solar radiation, wind energy, geothermal energy, and biomass energy have now reached the level of industrial application. A new way to generate electricity using low-potential heat is to install a hydro-steam turbine. In hydro-steam turbines, hot water is supplied directly to turbine rotor nozzles without prior separation into steam and water in separators, which significantly increases the efficiency of hot water energy use. Such turbines are suggested to be used as autonomous energy sources in geothermal heating systems, heating water boilers and cooling systems of chemical reactors, metallurgical furnaces, etc. The authors conclude that the installation of hydro-steam turbines in heating plants and process boiler plants can also be effective if the used exhaust steam-water mixture at the turbine outlet is used to heat the network water or as return water.

• 소성∙가공
• /
• 제17권8호
• /
• pp.570-578
• /
• 2008

A flexible forming apparatus is composed a number of punches which have spherical pin tip shape instead of conventional solid die. The flexible forming tool consisted of punch array in a matrix form was proposed as an alternative forming method to substitute the conventional line heating method which use heat source to induce residual stress along specified heating lines. In this study, application of the flexible forming process to the small scale curved plate forming was conducted. Numerical simulations for both solid and flexible die forming process were carried out to compare the shape of the products between flexible and conventional die forming process. In addition, spring-back analysis was conducted to figure out the feasibility of the flexible forming process comparing with the die forming process in view of final configuration of the specimens. Moreover, experiment was also carried out to confirm the formability of the process. Consequently, it was confirmed that the flexible die forming method has capability and feasibility to manufacture the curved plates for shipbuilding.

• 대한기계학회논문집B
• /
• 제20권3호
• /
• pp.988-1004
• /
• 1996

The characteristics of flow and oxygen concentration are numerically studied in Czochralski 8" silicon crystal growing process considering radiative heat transfer. The analysis of net radiative heat flux on all relevant surfaces shows growing crystal affects the heater power. Furthermore, the variation of the radiative heat flux along the crystal surface in the growing direction is confirmed and should be a cause of thermal stress and defect of the crystal. The calculated distributions of temperature and, heat flux along the wall boundaries including melt/crystal interface, free surface and crucible wall indicate that the frequently used assumption of the thermal boundary conditions of insulated crucible bottom and constant temperature at crucible side wall is not suitable to meet the real physical boundary conditions. It is necessary, therefore, to calculate radiative heat transfer simultaneously with the melt flow in order to simulate the real CZ crystal growth. If only natural convection is considered, the oxygen concentration on the melt/crystal interface decreases and becomes uniform by the application of a cusp magnetic filed. The heater power needed also increases with increasing the magnetic field. For the case of counter rotation of the crystal and crucible, the magnetic field suppresses azimutal flow produced by the crucible rotation, which results in the higher oxygen concentration near the interface.

• 식품과학과 산업
• /
• 제53권3호
• /
• pp.284-294
• /
• 2020

고전압 펄스 전기장 기술은 전기 에너지를 활용한 친환경적 비가열 공정 기술로서 꾸준히 업계의 관심을 받고 있다. 장치에 대한 이해의 부족과 장비가격에 대한 부담으로 실제 상업적 적용이 크게 증가하지 않고 있으나 가열 공정을 대체할 수 있는 기술로서의 가능성은 지속적으로 제기되고 있다. PEF 공정을 이용한 식품의 살균은 지금까지는 대부분 과일 및 야채 주스 등 저점도의 액체 식품의 살균에 대해 적용되어 왔으나 최근에는 고점도의 스무디, 고농도 단백질 음료, 혼합 주스, 알코올 음료 등으로 적용 범위가 확대되었으며, 분말, 생육 등 고체 식품의 살균에 대한 연구도 진행되고 있다. 살균 이외에도 색소, 유용성분의 추출 및 회수, 생리활성물질의 활성화, 건조의 전처리 등의 식품 공정뿐만 아니라 씨앗의 발아율 증가, 육제품의 육질 변화, 전분의 물성 변화 등에 대한 적용이 연구되면서 기존의 식품 공정을 보완 또는 대체할 수 있는 기술로서 기대되고 있다.

• 대한심미치과학회지
• /
• 제7권1호
• /
• pp.6-17
• /
• 1998

치아미백은 100여년전 이상부터 시행되어 왔으나, 지난 4반세기 동안의 생활치아 미백술의 표준적인 방법은 과산화수소와 열원을 사용하거나, 열원과 광원을 복합해서 사용하는 것이었다. 이 술식의 단점은 술식의 복잡성, 많은 비용, 결과의 불확실성과 환자의 불편이었다. 1989년 3월에 치과계에서는 Haywood와 Heyman에 의해 발표된 새로운 생활치아 미백술(Night Guard Vital Bleaching)을 도입했다. 치아구조에 대한 carbamide peroxide의 화학적 효과를 알고 있었으면 수년 전에 개발되었을 아주 간단한 치료술식이다. 이 방법은 시술이 쉽고, 사용 되는 재료의 높은 안전성, 낮은 치료비, 높은 성공률로 최근 다시 치아미백 붐을 일으키는데 일조를 하고 있으며, 생활치아 미백술의 표준적인 방법으로 신속히 자리잡아가고 있다.