• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.13-20
• /
• 2011

The high fuel flexibility of Micro Gas Turbine(MGT) has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and landfill as a fuel for gas turbines has increased. We researched the influence of firing landfill gas(LFG) on the performance and operating characteristics of a micro gas turbine combined heat and power system. $CH_4$ and $CO_2$ simultaneous recovery process has been developed for field plant scale to provide an isothermal, low operating cost method for carrying out the contaminants removal in Land Fill Gas(LFG) by liquid phase catalyst for introduce into the green house for the purpose of $CO_2$ rich cultivation of the plants. Methane purification and carbon dioxide stripping by muti panel autocirculation bubble lift column reactor utilizing Fe-EDTA was conducted for evaluate optimum conditions for land fill gas. Based on inflow rate of LFG as 0.207 $m^3$/min, 5.5 kg/$cm^2$, we designed reactor system for 70% $CH_4$ and 27% $CO_2$ gas introduce into MGT system with $H_2S$ 99% removal efficiency. A green house designed for four different carbon dioxide concentration from ambient air to 1500 ppm by utilizing the exhaust gas and hot water from MGT system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.597-607
• /
• 1998

Processing is generally employed to alter the physical and chemical properties of feeds used in pig diets, using hammer/roller mills, pellet mills and extruders/expanders. The reported optimum particle sizes of corn are approximately $500{\mu}m$, $500-700{\mu}m$, $400-600{\mu}m$, for nursery, growing-finishing, and breeder pigs respectively. Optimum particle size of grains are affected by diet complexity. There was a trend towards reducing particle size in order to increase ADG in pigs fed a simple diet, though such was not the case for pigs fed a complex diet. Uniformity of particle size also affects the nutritional values of swine feeds. Uniform particle sizes would consistently give greater nutrient digestibilities. In terms of pellet quality, it is reported that a higher incidence of fmes in pelleted feeds has a direct correlation with poorer feed conversion ratio in pigs. Particle and pellet sizes are also very important for pelleting in terms of grinding, digestibility, stomach ulceration and pellet durability. A particle size of $600{\mu}m$, or slightly less, seemed optimal for com in fmishing pigs, and the 5/32 in. diameter pellets supported the best efficiencies of gain during nursery and finishing phases. Extruder and/or expander processes would allow the feed industry an increased flexibility to utilize a wider spectrum of feed ingredients, and improve pellet quality of finished feeds. It would appear that extruded or expanded diets containing highly digestible ingredients have little effect on the growth performance of pigs, and the feeding values of the feeds over pelleted diets were not improved as pigs grew. The extruder or expander is much more effective than a pelletizer in salmonella control. Gastric ulcerations and/or keratinizations were consistently reported in pigs fed mash and processed diets containing finely ground grains, whereas carcass quality was not affected by diet processing methods such as pelleting, extruding or expanding. In corn- or sorghum-based diets, the electrical energy consumption is 4-5 times higher in the expanding than in the pelleting process. But the expander's processing cost was half of that shown by an extruder. Finally, the decision of which feed processing technology to adopt would depend on the processing cost, and any potential improvement in growth performance and digestibilities of nutrients should offset the increased operating and capital costs related to the extruder/expander technology over mash or pelleting processes in pigs.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.333-338
• /
• 2012

Human resource management is bringing the various changes with the IT technology. In particular, if HRM is non-scientific method such as group management, physical plant, working hours constraints, personal contacts, etc, the current enterprise human resources management(e-HRM) appeared in the individual dimension management, virtual workspace (for example: smart work center, home work, etc.), working time flexibility and elasticity, computer-based statistical data and the scientific method of analysis and management has been a big difference in the sense. Therefore, depending on changes in the environment, companies have introduced a variety of techniques as RFID card, fingerprint time & attendance systems in order to build more efficient and strategic human resource management system. In this paper, time and attendance, access control management system was developed using multi camera for 2D and 3D face recognition technology-based for efficient enterprise human resource management. We had an issue with existing 2D-style face-recognition technology for lighting and the attitude, and got more than 90% recognition rate against the poor readability. In addition, 3D face recognition has computational complexities, so we could improve hybrid video recognition and the speed using 3D and 2D in parallel.

• Informatization Policy
• /
• v.24 no.2
• /
• pp.87-104
• /
• 2017

The Fourth Industrial Revolution, which is based on the development of information and communication technology (ICT), is expected to replace human knowledge work, which will cause problems of mass unemployment and wide income gap from job polarization. Furthermore, the change is expected to be rapid and wide, demanding proactive measures to respond to such abrupt social changes. However, previous literatures assume that the traditional form of employment will continue and provide limited solutions only. On the other hand, the Fourth Industrial Revolution will enable transition to the Prosumer Economy, which will ultimately lead consumers to become producers through increased job flexibility. If the prosumer economy arrives and the consumers become producers, it will no longer be the matter of finding workplace but rather, the matter of finding the work itself. In this regard, the new technologies of the Fourth Industrial Revolution can be the fundamental solution to such job issues. This paper suggests stable transition to the Prosumer Economy in order to solve the job issues in the age of the Fourth Industrial Revolution. In order to effectively support the process, this paper suggests first, ensuring the amount of education by shortening labor time; second, facilitating life-time education through free online education service; and third, closing the digital divide through mandatory use of the e-government system.

• Management & Information Systems Review
• /
• v.36 no.1
• /
• pp.215-232
• /
• 2017

[Purpose] The purpose of this study is to point out the issue of pensions and retirement income tax which were amended from 2012 to 2016 and present a rational and intellectual improvement to this issue. [Methodology] This study was carried out a literature survey about the tax laws of pension income and retirement income. In order to confirm the differences between the case-by-case tax burden, calculated the effect of tax burden by presenting the examples in the case of retirement income. [Findings] It is necessary to apply the differential multiples in accordance with the seniority when leaving the company rather than applying the five times or 12 times in the tax base as the current retirement income tax. Also, It should be given the flexibility of pension income to ease the requirements of inevitable temporary receipt of a pension income. In addition, it is needed to expand separate taxation threshold which is current 12 million won. Finally, the annual limit of tax incentives for IRP should be increased significantly more than the current 7 million won. [Implications] The improvement of the study is to offer suggestions on the revision of retirement income and pension income taxation to the tax authorities or National Pension Service and retirement pension providers. The result of this study is expected to be used as reference to develop policy options on the legislative process.

• Journal of the Korean School Mathematics Society
• /
• v.6 no.1
• /
• pp.1-17
• /
• 2003

In this paper, we study the methods of improving an ability of a creative solving mathematical problem belonging to an educational system which every province office of education has adopted for the mathematically talented students. Especially, we give an attention on a preferential reaction in teaching styles according to student's LQ., the relationship between student's LQ. and an ability of creative solving mathematical problems, and seeking for an appropriative teaching methods of the improvement ability of a creative solving problem. As results, we have the followings; 1. The group having excellent students who have a higher intelligential ability prefers inquiry learning which is composed of several sub-groups to a teacher-centered instruction. 2. The correlation coefficient between student's LQ. and an ability creative solving of mathematical is not high. 3. Although the contents and the model of thematic inquiry learning don't have a great influence on the divergent thinking (ex. fluency, flexibility, originality), they affect greatly the convergent thinking - a creative mathematical - problem solving ability. Accordingly, our results show that we should use a variety of mathematical teaching materials apart from our regular textbooks used in schools to improve a creative mathematical problem solving ability in the process of thematic inquiry learning. Also we can see that an inquiry learning which stimulates student's participation and discussion can be a desirable model in the thematic mathematical classroom activities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.338-351
• /
• 2016

Park planning is done in a way to satisfy various expectations, including providing green space and offering urban space with specific and detailed strategies. This study focuses on large-scale parks that have been built since 2000 or that are going to be built. Their significance in the city was analyzed along with strategic characteristics for designing urban parks, and implications are suggested. First, the design aspects of urban parks have gradually tended towards flexibility for adapting to the diverse surrounding environments. Relating the parks to the surrounding area is realized through connection with facilities or planning to process the border area smoothly. Second, unlike in the past, urban parks are not just simply used as a resting space but play other productive and complex roles in the urban space for healing in the community. Third, six design strategies are being applied in these parks through mutually complex relations. Relations with external parties and planning inside the parks add more importance to the park for the community. Fourth, the changes of vertical time are reflected in park planning strategies and tend to form a floor plan. This is associated with growing park planning and is being realized as a major characteristic in urban park planning strategies.

• Journal of Distribution Science
• /
• v.12 no.2
• /
• pp.95-103
• /
• 2014

Purpose - Korea has a better geographical location than other nations in the Northeast Asian region. This means that Korea has an opportunity to become the center of international physical distribution in Northeast Asia. Korea should take advantage of this opportunity by exploring appropriate strategies to achieve this goal, assuming government willingness, with a view to capitalizing on the geographical advantage of the Korean peninsula and constructing a comprehensive physical distribution network system. If we prepare for this scenario, Korea could become the center of international physical distribution in Northeast Asia. Research design, data, and methodology - This study has the purpose of determining how shipping companies form partnerships with third-party logistics providers, and the relevant implications. The survey methods used were personal interview and a questionnaire distributed through e-mail, fax, mail, and telephone. A total of 600 questionnaires were distributed, out of which 285 were returned. Of the collected questionnaires, 10 were excluded because of insufficient content, leaving 275 to be used in the study as available valid samples. The data that was collected from these samples was analyzed using the data coating process and by employing a statistical package program. Results - Flexible policies, administration, and systems will be needed to create better business practices. In this dissertation, first and foremost, the results reveal that in order to become the center of Northeast Asian logistics, Korea must transition into a new paradigm based on the current economic and social systems that have stemmed from bureaucracy, inflexibility, chauvinism, and egalitarianism. Flexible policies, administration, and systems will be required to create better business practices. Domestic logistics corporations need to occupy a strategic logistics hub, create a logistics network, and activate value-added logistics business strategies by ensuring significant manpower and by building a logistics information system to strengthen their competitive edge, creating an improved system. Conclusions - In this dissertation, first and foremost, we point out that in order to become a center of North East Logistics, Korea should change to a new paradigm from the old one based on current economic and social systems that have stemmed from bureaucracy, inflexibility, chauvinism, and egalitarianism. More reasonable business laws, systems, and policies based on market-driven flexibility and transparency should be created. Moreover, social norms and rules should be reasonably established, to accomplish political and social security. Korea has to cultivate a culture of tolerance for foreign companies. This involves a change of paradigm for the development of the capital city and satellite cities. It will take a powerful task force or organization to plan and execute the vision that aims to meet these needs, accomplish the necessary goals, use the appropriate system effectively, and make Korea a key country in the field of Northeast Asian logistics.

• Strategy21
• /
• s.30
• /
• pp.236-262
• /
• 2012

Morgenthau claims that in international relations, there are the economic, political, and military powers that enable a nation to achieve its political and diplomatic goals. This paper explores the possibility of resolving international conflicts with naval power. First, the theoretical and historical perspective, naval power was used as a final resort to force a nation's political or diplomatic objective on an enemy nation when negotiations failed, and this was done through the physical and psychological destruction of the enemy by naval power. But as the use of military power has decreased because of the invention of the nuclear weapon, the existence of a large and capable navy deterrent has become one of the most useful military options among a nation's diplomatic measures. In other words, he focused on the political usefulness of naval power as a deterrent and coercive diplomatic tool for persuading other nations to acquiesce, rather than using naval power and actual military action as a final resort. The reason for this is that compared to army and air force, navy's flexibility, continuity, and the ability to deter are greater. The navy provides excellent accessibility through its wide mobility on the sea, and it has been shown through research that the navy possesses a political usefulness that facilitates the solution of conflicts through presence, naval intervention, and naval blockade. On the other hand, among the factors that could improve the influence of the navy are alliance relations, a reliable and powerful navy, carrots and sticks that it would have to deal with in the case of successful or unsuccessful negotiations, and support from international opinion. On this paper I introduce E.N.Luttwak's naval suasion theory. By the his theory, there are two mode of naval suasion. One is latent naval suasion the other is active suasion. Latent suasion there are deterrent mode and supportive mode. Active naval suasion there are coercive mode and supportive mode. Coercive mode has positive and negative. The limitations of naval suasion have been identified as follows. First, because the objective of the use of naval power is persuading enemy nations, the results are unpredictable. Second, the leaders of all countries possess limited understanding on the complexities of naval power and therefore lack understanding of the usefulness of naval power when choosing options. Third, in case of failure through naval suasion, prestige and reputation of a nation can be damaged. Finally, the following are additional possible research topic. First, a research on the decision making process of choosing naval power as a measure to resolve conflicts is needed. Lastly, research on the size of the navy and types of ships required for efficient naval suasion is needed. Today's world requires cooperative security regime so that middle class navy also requires political use of naval power in solving international conflicts. Therefore, additional research on this topic is needed.

• Journal of the Korean Society of Costume
• /
• v.44
• /
• pp.181-199
• /
• 1999

The industry of modern clothing has deviated from the overflow of commercialism and the standardization and nowadays is going toward pursuing art, creativity, and high added value. This trend brings the return of the natural materials from the synthetic textiles and increases the value of old and handmade fabrics. Finally, the handmade-paper, which is a natural material, comes to be reconsidered as a new material for the clothing. Therefore, as the natural materials and the manufacture of handmade clothing are rising again, the qualitative improvement and globalization of clothing industry should be first realized through the developments of creative and various clothing materials and new expressing techniques. The above investigation and study have been synthesized and analyzed as follows: First, through the study on the origin of the paper clothing, its historical background and the process of its development, we've learned these two facts following : the paper clothing of the East in the past mostly had practiced meanings. On the other hand, in the West it had meanings which were raised the artist's emotions and beauty-consciousness to the artistic level by the various kinds of expressing methods. Second, handmade-paper was manufactured by the embedding method, which mixed mulberry pulp, gauze, corn, hair, sisal, silk and so on. It was found that handmade-paper had the affluent and proper texture as the clothing material and was be able to control the clarity through the variation of thickness. It was also confirmed that the creative and original texture with hand-worked molding beauty was obtained by the use of handmade-paper. Third, when the handmade-paper is used, the molding beauty of plane, relievo, and solid can be freely pursued, and various and effective molding conformation can be constructed by the effect of superposition and repetition. Also, because the maximum discretion from the various optional manufacturing methods is allowed, the molding beauty can be maximized when the clothes are manufactured with handmade-paper. Fourth, the gauze with strong drape was combined to overcome the stiffness and the tearing of the paper. As a result, the durability and the wearability of the paper were strengthened and thus the thus the applications as the clothing material were enlarged. In conclusion, in order to enhance the value, creativity, practicality, and artistic sense of the design for modern clothing, the clothes made of handmade-paper should be more studied. Moreover, for the generalization of paper clothes, the studies on the development of practical paper with paper with water resistance, post-treatment after dyeing, flexibility, and durability should be done. I really hope that this study will be the motive to provoke the possibility of handmade-paper as new clothing material in not only practical sense but also artistic sense.