• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.197-204
• /
• 1997

The development of computer-integrated design systems that fully support structural design process needs the computerization of structural design at the preliminary design stage. The objective of this paper is to develop a prototype system for preliminary design of reinforced concrete structures. This study focuses on the development of a natural design process oriented GUI(Graphic User Interface) and a representation of an experienced knowledge. The prototype system has been currently implemented using the objected-oriented programming concepts, the program language(i.e.,Visual C++) and the expert shell(i.e., Intelligent Rules Element).

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2003년도 추계학술대회
• /
• pp.233-240
• /
• 2003

To develop high-quality software systems satisfying the customer's needs, user-centered design (UCD) process has been emphasized in the area of human-computer interaction. And component-based development (CBD) has been extensively studied to realize a systematic software reuse, thereby reducing the time-to-market and the development cost. Balanced integration of user-centered design process and CBD process will be a promising way for successful software construction, which effectively achieves three goals: the quality of software, the cost of software development, and the time-to-market. However, traditional CBD methodology seems to lack the concept of user-centered design process and the relevant methods. This paper proposes a way of incorporating user-centered design process into a CBD methodology. Firstly, this paper gives the brief introduction of UCD. Secondly, we explain typical UCD activities and methods along the phase of systems development lifecycle and propose the use of usability maturity model (UMM) for integrating UCD activities and methods with those of CBD methodology. Finally, as a case study, we describe the results of comparing the UCD activities to the activities of MaRMI-III, which has been developed as a CBD methodology at ETRI.

• 인간식물환경학회지
• /
• 제23권1호
• /
• pp.23-33
• /
• 2020

This study starts from the awareness of the problem that consumers are isolated from the standing spray product planning, and thus suggests effective designs and methods to the new standing spray design process. The ultimate purpose of this study is to suggest practicable new standing spray design outputs. Service design is based on customer experience, and thus it is intangible, process-centered and based on various relations. Applying the service design to the development of new standing spray designs has the following significance. (1) Service design is an effective method for maximizing customer-centered experience. The customer-centered method of service design promotes practicability of new standing spray design. (2) Service design solves various problems by mediating opinions among various stakeholders. Effective and practicable solutions could not be found for new standing spray design despite various efforts that had been made for a long time. Since each step of the process is approached separately, it is necessary to take an overview of the whole process like service design. (3) Service design lays stress on process in which stakeholders participate. Participation and collaboration among stakeholders in the new standing spray design process will improve their satisfaction and enthusiasm to implement the new system.

• 디자인학연구
• /
• 제13권
• /
• pp.27-42
• /
• 1996

With the rapid development of nowadays technologies, the environment of product development is experiencing structural changes than ever. Manufacturers are put under never-experienced pressures to launch their products in the market both faster and less expensively than their competitors while continuously improving product quality These pressures have given birth to so-called, Concurrent Engineering which is a systematic approach to the integrated, concurrent design of products and their related processes, including manufacture and support. Most manufactiring companies now recognize the importance of concurrent engineering and put heavy emphasis on the research and impementation of concurrent engineering. However, with this fundamental change in the process of product development, designers rarely pay attention to this newly demanding process. Designers still stay in the middle of process, satisfying their roles in dealing with aesthetic points of product. Designers badly need to incorporate the concept of concurrent engineering to design to design process and to adapt to this new environment. With these backgrounds, the study sets the objective to understand the nature of concurrent engineering and explore the possibility of it's application to industrial design. Particularly this study focuses on how the concept of concurrent engineering can be applied from the stage of form development to prototyping. At first, background, objectives, and scope of the study are discussed as an introductory part. It is followed by reviewing theories of concurrent engineering such as definition, history, technologies, examples, state of art and so on. Subsequently industrial design is viewed in terms of concurrent engineering and problems in industrial design are identified. Base on the findinss of precedent part of study, new process of industrial design incorporating concurrent engineering is developed. For the demonstration of new process, a case study of design of palm-top printer is introduced. Case study shows how the sketch, and forms can be transformed into prototyping with the simultaneous cooperation with engineering and other related specialists. Finally the study in summarized and future studies are prospected.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.35-41
• /
• 2013

Nowadays, automated modeling system for steel margin based on interactive user interface has been developed and applied to the production design stage. The system could increase design efficiency and minimize human error owing to recent CAD technique. However, there has been no approach to the pre-nesting design stage at all in early modeling process especially where ship model should be handled at more than two design stages using AVEVA Marine. A designer of the design stage needs artificial intelligence system beyond modeling automation when 3D model must be prepared in early modeling process using AVEVA Marine because they have focused on 2D nesting traditionally. In addition, they have a hard time figuring out the model prepared in previous design stage and modifying the model for steel purchase size in early modeling process. In this paper, artificial intelligence modeling system for automated application of steel margin in early modeling process using AVEVA Marine is developed in order to apply to the pre-nesting design stage that can detect effective segments before a calculation to find if a segment locates near block butt boundaries by filtering noise segments among lines, curves and surface intersections based on IT big data analysis.

• 한국실내디자인학회논문집
• /
• 제15권5호
• /
• pp.265-272
• /
• 2006

Traditionally exhibition design as been restricted to architectural, interior, and lighting design, but recently it has begun to overlap into environmental, performance, and installation art. Exhibition design also increasingly involves the application of film, fashion, and the new media. In the past, exhibits were arranged and displayed for the visitor to view directly, but with the development of more effective exhibit media a connection has been created between the exhibit and the visitor. However exhibition design has reached the limits of continuous growth without background theory, when now it must take Into consideration the museum's activation and the importance of the exhibition's design. Exhibition design has developed and grown rapidly since the Taejeon Expo in 1993, but it is a difficult development without a theoretical structure. The flow of exhibition design must be systemized, as the systemization of the transition process of exhibition design has not yet been achieved. This study aims to present an arrangement of exhibition design flow, and to investigate the variation factors in the transition process of exhibition design and exhibit medium development, based on the 18 year history of the Independence Hall that introduced the first systematic planning of an exhibition in 1987.

• 패션비즈니스
• /
• 제17권4호
• /
• pp.58-74
• /
• 2013

This research is a case study for the planning process and production process of design project done through industry-university collaboration research. Proposed for the design process and result for the development of the corporation's promotional fashion items. In addition, during the 3-month study period, went through the research process of a number of design, planning, meetings, discussions, and colorway, sample production and selection. The study was carried out using mainly necktie and scarf, the ones one can make use of the best among men's and women's fashion items as fashion items for promotion. The design work was done using Adobe Photoshop CS5, Adobe Illustrator CS5, Texpro 11 version programs. This study is a design development case study where design research experts and the persons in charge from the company took part in for the PR the company demands, and wish it to be used as a basis material for improving company image as a fashion product for the PR of a company.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.763-767
• /
• 2002

This paper explores a structuring method for solid modeling processes of an automobile automatic transmission-lever design. The aim of this work is to establish standard procedures to minimize iterations and trial and errors during the product development process to increase development time and costs. The design of the transmission-lever is periodically required to be changed with the model change of an automobile. The transmission-lever design process has mainly depended on the designer's experience. It causes to make difficulties to handle the dependency of components. The design process can be improved by resolving the dependency problem using the DSM. The process of applying the DSM provides a systematic way for the solid modeling of transmission-lever by the consideration of geometry dependency.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.824-836
• /
• 2008

Relaxed static stability(RSS) concept has been applied to improve aerodynamic performance of modern version supersonic jet fighter aircraft. Therefore, flight control systems are necessary to stabilize an unstable aircraft, and provides adequate handling qualities and achieve performance enhancements. Standard FCSDVP (Flight Control System Design and Verification Process) is provided to reduce development period of the flight control system. In addition, if this process is employed in developing flight control system, it reduces the trial and error for development and verification of flight control system. This paper addresses the flight control system design and verification process for the RSS aircraft utilizing design goal based on military specifications, linear and nonlinear system design and verification based on universal software, handling quality test based on HILS(Hardware In-the-Loop Simulator) environment, and ground and flight test results to verify aircraft dynamic flight responses.

• 한국컴퓨터정보학회논문지
• /
• 제4권4호
• /
• pp.113-119
• /
• 1999

최근에 설계패턴 방법이 효율적이고 실용적인 재사용 기법으로 부각되고 있다. 설계패턴은 특정 도메인에 대한 여러 어플리케이션들 간의 공통된 행위들을 지닌 클래스들의 집합으로, 재사용성을 증가시키고, 어플리케이션 개발 시간을 단축시키는 효과를 가지고 있다. 그러나 설계패턴을 구축하기 위한 체계적인 개발 프로세스와 세부적인 개발 지침에 대한 연구가 충분히 이루어지지 않은 상태이다. 본 논문에서는 설계패턴을 기반으로 한 인트라넷 어플리케이션 구조의 모델링 기법을 제시한다. 제시된 모델링 기법의 프로세스는 영역분석, 네비게이션 설계. 인터페이스 설계, 행위영역 설계로 구성되어 있으며 각 단계는 논리적인 개발 업무들로 정의된다. 제시된 프로세스를 적용함으로서 보다 효율적인 인트라넷 모델링이 될 수 있다.