• Composites Research
• /
• v.36 no.3
• /
• pp.167-172
• /
• 2023

The manufacturing technology of composite material is applicable with filler characteristics maintaining low cost, flexibility, and easy process to develope the various functional composite materials. To realize functional composites, various researches on the high performance of composite materials using graphene as a filler is being actively conducted. In this study, physical and chemical properties were investigated using graphene to improve high functional properties. Graphene oxide (GO) was prepared using graphane nanoplatelet (GNP), and reduced graphene oxide (R-GO) was formed by reducing GO. The physical properties of GO and R-GO were analyzed, and the reliability of the manufactured method was reviewed by comparing that of GNP results. As a result of analysis by Raman spectroscopy, in the case of R-GO, it was confirmed that the intensity of D-peak and G-peak decreased compared to GO, and an increase of 0.08 was observed through the ratio of ID/IG. For the FTIR results, GO and RGO has a repeating C-C and C=C connection structure unlike GNP. GO and R-GO show clear peaks for C-O bond, C=C bond, C=O bond, and O-H bonding. As a result of X-ray diffraction analysis, GNP showed a wide diffraction peak at 25.86° of (002) plane characteristics, whereas GO and R-GO showed peaks corresponding to (001) and (100) planes. It was also found that the interlayer distance of GO increased by about 2.6 times compared to GNP.

• Journal of Service Research and Studies
• /
• v.11 no.3
• /
• pp.75-97
• /
• 2021

This study was conducted to derive a society and education system model that will improve the happiness and sustainability of human society. An ideological model for making human society a happy society was derived, and a society and education system structure and operation model based on this was presented. A fair society, a justice society, a mutually considerate society, and a society where individuals are happy are the conditions for a sustainable society. After analyzing the current situation of freedom and equality pursued by capitalism and democracy, which are currently adopted by most societies, an improvement model was derived from the perspective of a sustainable society. The cost of freedom and equality were analyzed and a new alternative system was discussed. The social solidarity and class mobility issues were discussed together and servicism was derived as an alternative solution. It is a system in which two opposing opponents of individual freedom and social norms form a symmetrical balance, and material and spiritual values are balanced. Servicism is a dynamic balance model. That is, the dimensions of time and space are involved. It is a model that maintains a thorough balance through a dialectical process as time and space change, and one value can dominate the other at a specific time or space. The service-oriented society and education system is a system that simultaneously pursues the goals of individual happiness and sustainable development of the social community.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.249-258
• /
• 2008

Korean engineering firms need to improve their performance in order to stay competitive in the globalize environments which has been led by some international movements including World Trade Organization (WTO) and Free Trade Agreements (FTA). There have been various activities and researches focusing on how to improve competitiveness of Korean engineering firms and the out-of-fashion Engineering Project Delivery System (EPDS) has repetitively identified as one of main barriers to deter advancements of Korean engineering industry. Therefore, this research attempted to investigate global standards of EPDS such as International Federation of Consulting Engineers (FIDIC), American Federal Acquisition Regulations (FAR), Brooks Act, and so on. The procedures of international EPDSs along with a few case studies were comprehensively analyzed and compared with Korean EPDS in order to propose recommendations of improving Korean EPDS. Some major differences between international and Korean EPDS were identified and they includes emphasis on qualifications of engineers and/or firms rather than their proposed cost, extensive use of long and short-list, common use of negotiation process, etc. Research findings are envisioned to guide the Korean public engineering sector to innovate Korean EPDS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.122-124
• /
• 2022

Handling Passenger Traffic is the main challenge for designing an elevator group-control algorithm. Advanced control systems such as Hyundai's Destination Selection System(DSS) lets passengers select the destination by pressing on a selecting screen, and the systems have shown great efficiency. However, the algorithm cannot be applied to the general elevator control system due to the expensive cost of the technology. Often many elevator systems use Nearest Car(NC) algorithms based on the SCAN algorithm, which results in time efficiency problems. In this paper, we designed an elevator group-control algorithm for specific buildings that have approximate timetable data for most of the passengers in the building. In that way, it is possible to predict the destination and the location of passenger calls. The algorithm consists of two parts; the waiting function and the assignment function. They evaluate elevators' actions with respect to the calls and the overall situation. 10 different timetables are created in reference to a real timetable following midday traffic and interfloor traffic. The specific coefficients in the function are set by going through the genetic algorithm process that represents the best algorithm. As result, the average waiting time has shortened by a noticeable amount and the efficiency was close to the known DSS result. Finally, we analyzed the algorithm by evaluating the meaning of each coefficient result from the genetic algorithm.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.111-111
• /
• 2022

According to data from the Ministry of Environment, food waste accounted for 27% of the nation5 s household waste in 2020, and 4.67 million tons of food waste is being discharged per year. According to the Food Waste Direct Landfill Prohibition Act, food waste must be incinerated, composted, fodder, and decomposed before landfilling. The cost of incineration and landfilling of food waste is considerable. Therefore, through the process of turning food waste into fertilizer, we are going to investigate the limit of crop application and the change in the growth of crops during continuous use of food waste fertilizer. This study investigated the growth of lettuce such as shoot length, root length, leaf number, fresh weight, and dry weight after treating lettuce with food waste dry powder mixed fertilizer. The experiment was carried out continuously in 2021 (1st year) and 2022 (2nd year), and the treatment groups were set to No Treatment (NT), Chemical Fertilizer (CF), Mixed Fertilizer (MF×1), and Mixed Fertilizer×2 (MF×2), was repeated 3 times. As a result of the 1st year growth survey, there was no significant difference between NT and CF in the case of shoot length, but MF×1 and MF×2 were significantly decreased compared to NT. Root length was not significantly different in all treatment groups. As for the leaf number, there was no significant difference between NT and MF×1, but CF and MF×2 were significantly decreased compared to NT. In fresh weight, MF×1 and MF×2 were significantly decreased compared to NT, and in the case of dry weight, there was no significant difference between NT, MF×1, and MF×2. As a result of the 2nd year growth survey, there was a significant difference in CF and MF×2 in leaf number, but there was no significant difference in all treatment groups with respect to shoot length, root length, fresh weight, and dry weight. Through continuous additional research, it is necessary to confirm the change in soil composition and the growth of crops due to food waste fertilizer treatment.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.394-407
• /
• 2023

Ecological restoration is an ecological technology that diagnoses problematic ecological spaces and restores the damaged ecosystem to a healthy appearance similar to its original appearance based on reference information obtained by analyzing intact nature. To achieve successful restoration, the project must be carried out in respect of a series of procedures. However, in Korea, restoration projects are usually actively promoted regardless of diagnostic evaluation, which wastes cost and energy, and the effect is not significant. As the reference information is not utilized, ecological restoration to return the damaged nature makes features different greatly from the appearance of nature, causing another damage. As the restoration effect is not evaluated, it is impossible to determine whether it is successful or not, and as a result, even if the project continues, there is no development and no effect. However, advanced societies have not only made academic progress by respecting these procedures but also have great economic effects along with the improvement of environmental conditions as ecological restoration has become an industry. Therefore, the international society recognizes ecological restoration as an important means of solving environmental problems at the global level, including climate change, and international organizations are actively promoting projects to treat the injured planet. However, most of the restoration projects promoted in Korea were evaluated below the level as a result of the evaluation of the effect. Nevertheless, those who have led low-quality projects are blocking plans to establish ecological restoration as a new industry that can contribute significantly to improving these levels, and thus the problem is expected to worsen. To solve this problem, it is necessary to filter out defective businesses by introducing a strict and correct project evaluation system by dividing it into before and after. Furthermore, it is necessary to establish ecological restoration as an industry and leave the process in the principles of the market.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.841-849
• /
• 2023

Construction projects have risks due to various factors such as construction delays and construction accidents. Based on these construction risks, the method of calculating the construction period of the construction project is mainly made by subjective judgment that relies on supervisor experience. In addition, unreasonable shortening construction to meet construction project schedules delayed by construction delays and construction disasters causes negative consequences such as poor construction, and economic losses are caused by the absence of infrastructure due to delayed schedules. Data-based scientific approaches and statistical analysis are needed to solve the risks of such construction projects. Data collected in actual construction projects is stored in unstructured text, so to apply data-based risks, data pre-processing involves a lot of manpower and cost, so basic data through a data classification model using text mining is required. Therefore, in this study, a document-based data generation classification model for risk management was developed through a data classification model based on SVM (Support Vector Machine) by collecting construction project documents and utilizing text mining. Through quantitative analysis through future research results, it is expected that risk management will be possible by being used as efficient and objective basic data for construction project process management.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.1-12
• /
• 2023

In the current era of the global mobile smart device revolution, electronic devices are required in all spaces that people interact with. The establishment of the internet of things (IoT) among smart devices has been recognized as a crucial objective to advance towards creating a comfortable and sustainable future society. In-mold electronic (IME) processes have gained significant industrial significance due to their ability to utilize conventional high-volume methods, which involve printing functional inks on 2D substrates, thermoforming them into 3D shapes, and injection-molded, manufacturing low-cost, lightweight, and functional components or devices. In this article, we provide an overview of IME and its latest advances in application. We review biomimetic nanomaterials for constructing self-supporting biosensor electronic materials on the body, energy storage devices, self-powered devices, and bio-monitoring technology from the perspective of in-mold electronic devices. We anticipate that IME device technology will play a critical role in establishing a human-machine interface (HMI) by converging with the rapidly growing flexible printed electronics technology, which is an integral component of the fourth industrial revolution.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.62-69
• /
• 2023

The use of low-grade coal is continuously increasing with the development of combustion technology and cost reduction for coal used in thermal power plants . During combustion, the latent heat of evaporation due to moisture is large, and there is a risk of spontaneous combustion and dust explosion during the process of storing and pulverizing coal. This study compared and evaluated the minimum explosive concentration and explosive strength of four types of coal dust-fine, coal dust-coarse, wood pallet+organic dust, and wood chip with coal powder collected from domestic power plant D. The minimum explosive concentration of coal dust was measured according to JIS Z 8818:2002, and the explosion strength was tested according to ASTM E1226 using a Siwek 20 L Chamber Apparatus. As a result of the minimum explosive concentration test, it was found that coal dust-fine has a risk of dust explosion, and since an explosion occurs at a dust concentration of 130 g/m³ of wood chips, it was found that there is a risk of explosion at the lowest dust concentration. According to the dust explosion class standard, Kst is less than 200 bar m/s, and all samples fall under the explosion class St 1, and the dust has a low risk of explosion.

• Membrane Journal
• /
• v.34 no.1
• /
• pp.70-78
• /
• 2024

A photo-crosslinked anion exchange membrane (AEM) based on quaternary-aminated polyacrylates was developed for reverse electrodialysis (RED). Although reverse electrodialysis is a clean and renewable energy generation system, the low power output and high membrane cost are serious obstacles to its commercialization. Cross-linked AEMs without any polymer supporters were fabricated through photo-crosslinking between polymer-typed acrylates with anion conducting groups, in particular, polymer-typed acrylates were synthesized based on engineering plastic with outstanding mechanical and chemical property. The fabricated membranes showed outstanding physical, chemical, and electrochemical properties. The area resistance of the fabricated membranes (CQAPPOA-20, CQAPPOA-35, and CQAPPOA-50) were ~50% lower than that of AMV (2.6 Ω cm²). Moreover, the transport number of CQAPPOA-35 wase comparable to that of AMV, despite the thin thickness (40 ㎛) of the fabricated membranes. The RED stack with the CQAPPOA-35 membrane provided an excellent maximum power density of 2.327 W m^-2 at a flow rate of 100 mL min^-1, which is 15% higher than that (2.026 W m^-2) of the RED stack with the AMV membrane. Considering easy fabrication process by UV photo-crosslinking and outstanding RED stack properties, the CQAPPOA-35 membrane is a promising candidate for REDs.