• 한국경영과학회지
• /
• 제28권2호
• /
• pp.139-155
• /
• 2003

The aim of this study is to identify the data traffic capacity of 3G mobile communication networks, especially of cdma2000-1X networks. Three-layered ON/OFF traffic model is used to describe the dynamics of data traffics and the process of data transmission such as packet scheduling. We construct a simulator fully incorporating packet handling process of cdma2000-lX data network as well as three-layered ON/OFF traffic model describing the behavior of source data traffics. To get influence of traffic parameters on performance measures, the extensive simulations were performed for several data sets which are obtained from real trace data or previous studies. The experimental results show that the engineered throughput satisfying QoS criteria is approximately 25% of total capacity. Finally, some proposals to improve the system capacity are followed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.150-150
• /
• 2021

Soil erosion due to climate change is one of the global environmental issues. Especially, Korea is vulnerable to soil erosion as the frequency of extreme rainfall events and rainfall intensity are increasing. Soil erosion causes various problems such as reduced farmlands, deterioration of water quality in rivers, etc. To these severe problems, understanding the process of soil erosion is the first process. Then, it is necessary to quantify and analyze soil ersoion using an erosion model. Soil erosion models are divided into empirical, conceptual, and physics-based models according to the structures and characteristics of models. This study used GSSHA (Gridded Surface Subsurface Hydrologic Analysis), the physics-based erosion model, running on WMS (Watershed Modeling System) to analyze soil erosion vulnerability of the CheonCheon watershed. In addition, we compared the six sediment transport capacity formulas provided in the model and evaluated the equations fir on this study site. Therefore, this result can be as a primary tool for soil conservation management.

• 대한토목학회논문집
• /
• 제43권5호
• /
• pp.543-553
• /
• 2023

이 연구는 국내 공용 중인 교량 형식 중 건설 빈도가 가장 높은 RC 슬래브 교량의 공용내하력을 간단하게 평가할 수 있는 방안에 관한 것이다. 다수의 RC 슬래브 교량이 오랜 공용기간으로 인해 상당한 노후화가 진행된 상태지만, 교량의 규모 상 1, 2종 시설물에 포함되지 않아 그동안 안전 관리에 소홀한 측면이 있다. 기존의 이론적 선행연구에서는 실측 처짐 및 실측 고유진동수에 의해 도출된 처짐응답비와 강성저하율의 관계를 이용한 RC 슬래브 교량의 손상도 평가 프로세스(안)이 제시된 바 있다. 이 연구에서는 손상도 평가 프로세스(안)의 적정성을 검토하기 위해 실 교량에 대한 평가 결과를 시설물 안전법의 안전등급 및 Matsui의 노후도 지수와 비교·검토하였다. 또한 손상도 평가 프로세스(안)의 현장적용성을 향상시켜 실측 고유진동수만으로 개략적인 공용내하력을 평가하는 개선된 방안을 제시하였다. 연구결과, 10% 정도의 공용내하력 평가 결과의 오차를 허용하는 경우, 이 연구에서 제시된 방법은 노후화된 RC 슬래브 교량의 안전성 평가 및 유지보수 우선순위 산정 등에 효율적으로 활용될 수 있을 것으로 판단되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권2호
• /
• pp.54-59
• /
• 1999

An experimental study was carried out to improve the cooling capacity and performance of the pulse tube refrigerator. Three buffer pulse tube refrigerator was designed and fabricated, and the experimental apparatus operating process of the therr buffer pulse tube refrigerator and results obtained with the performance test. The cooldown characteristics and load characteristics are described. The lowest temperature measured in the three buffer pulse tube refrigerator was 88K and the cooling capacity at the optimum operating condition was 27 W at 120K.

• 품질경영학회지
• /
• 제20권2호
• /
• pp.118-128
• /
• 1992

The determination of appropriate buffer capacity is an important issue in the design of the advanced manufacturing systems and closely related to the system efficiency and flexibility. Work-in-process is usually not desirable. However, in reality, maintaining some capacity of buffer storage is inevitable in compensation for the machine blocking and break down. The objective of this paper is to present analytical methods and tools for the buffer capacity planning in the Flexible Manufacturing System Environments. The effects when machine blocking is critical factor are also discussed.

• 한국수소및신에너지학회논문집
• /
• 제35권1호
• /
• pp.105-113
• /
• 2024

The natural gas dehydration process plays a central role in liquefying LNG. This study proposes two natural gas dehydration process systems applicable to liquefied natural gas (LNG) liquefaction plants, and compares and analyzes energy optimization measures through simulation. The fuel gas from feed stream (FFF) case, which requires additional equipment for gas circulation, disadvantages are design capacity and increased energy. On the other hand, the end flash gas (EFG) case has advantages such as low initial investment costs and no need for compressors, but has downsides such as increased power energy and the use of gas with different components. According to the process simulation results, the required energy is 33.22 MW for the FFF case and 32.86 MW for the EFG case, confirming 1.1% energy savings per unit time in the EFG case. Therefore, in terms of design pressure, capacity, device configuration, and required energy, the EFG case is relatively advantageous. However, further research is needed on the impact of changes in the composition of regenerated gas on the liquefaction process and the fuel gas system.

• 공업화학
• /
• 제16권2호
• /
• pp.200-205
• /
• 2005

우리는 이전의 연구에서 석탄회를 이용하여 높은 미생물 담지능과 양이온에 대한 흡착능을 가지는 다공성 담체를 제조하였다. 본 연구는 다공성 석탄회 담체를 사용한 폐수 처리 생물막 공정 개발을 목적으로 실험실 규모의 연속류식 고정층 생물막 공정에 의한 돈사 폐수 처리 특성을 상용 미생물 담체 및 기존의 활성슬러지법과 동일 조건에서 비교 고찰하여 보았다. 실험 결과로서 제조한 석탄회 담체는 COD, TN, $NH_4{^+}-N$ 항목의 평균 제거율이 각각 80%, 77%, 65%로서 상용 담체 및 기존의 활성 슬러지 공정과 비교하여 높은 제거율을 나타내었다. 처리 후 미생물 담지량을 측정해 본 결과 상용 담체에 비해 높은 값을 나타내었으며, SEM 관찰 결과 석탄회 담체에 미생물 군집이 안정하게 형성되었음을 확인할 수 있었다.

• 한국정보통신학회논문지
• /
• 제23권6호
• /
• pp.690-696
• /
• 2019

기술사업화 과정을 통해서 시장에 진입하는 신생기업은 높은 불확실성에 직면한다. 특히 경쟁시장에 진출하는 ICT관련 기업은 더욱 복잡한 상황을 처리해야 한다. 불확실성 해결을 위한 심도 있는 연구가 이루어졌지만 기업의 사업화 프로세스에 대한 이해는 여전히 부족하다. 논의를 위해서 본 연구는 기술사업화 모델과 결정요인을 (정책, 재무, 작업 팀, 조직 문화, 어려움 극복 등) 제시한다. 연구대상은 연구개발특구의 연구기관에서 기술을 이전받은 ICT 관련 스핀오프 기업이다. 연구결과는 조직역량의 지속성이 기술사업화프로세스의 준수만큼 중요하다는 사실이 나타났다. 조직역량이 줄어들 때 기술사업화의 추진동력 또한 약해지는 결과가 나타났기 때문이다. 따라서 기술사업화 프로세스는 시장 진입의 성공을 보장하는 것이 아니며 시장 접근의 수단으로 이해된다. 조직역량의 강화가 이루어지지 않으면 성공적인 기술사업화 프로세스도 존재하지 않는 것이다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.172-175
• /
• 2001

The co-cured Joining method, which is regarded as an adhesively bonded Joining method, is an efficient joining technique because both curing and bonding processes for the composite structures can be achieved simultaneously. It requires neither surface treatment onto the composite adherend nor an additional adhesive joining process because the excess resin, which is extracted from composite materials during consolidation, accomplishes the co-cured Joining process. Since the adhesive of the co-cured joint is the same material as the resin of the composite adherend, the analysis and design of the co-cured joint for composite structures are simpler than those of an adhesively bonded joint, which uses an additional adhesive. In this paper, effects of the manufacturing parameters, namely surface roughness, stacking sequence of the composite adherend, and manufacturing pressure in the autoclave during curing process, on the tensile load bearing capacity of the co-cured single lap joint will be experimentally investigated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4063-4086
• /
• 2016

Cloud computing is a robust technology, which facilitate to resolve many parallel distributed computing issues in the modern Big Data environment. Hadoop is an ecosystem, which process large data-sets in distributed computing environment. The HDFS is a filesystem of Hadoop, which process data blocks to the cluster nodes. The data block placement has become a bottleneck to overall performance in a Hadoop cluster. The current placement policy assumes that, all Datanodes have equal computing capacity to process data blocks. This computing capacity includes availability of same storage media and same processing performances of a node. As a result, Hadoop cluster performance gets effected with unbalanced workloads, inefficient storage-tier, network traffic congestion and HDFS integrity issues. This paper proposes a storage-tier-aware Robust Data Placement (RDP) scheme, which systematically resolves unbalanced workloads, reduces network congestion to an optimal state, utilizes storage-tier in a useful manner and minimizes the HDFS integrity issues. The experimental results show that the proposed approach reduced unbalanced workload issue to 72%. Moreover, the presented approach resolve storage-tier compatibility problem to 81% by predicting storage for block jobs and improved overall data block placement by 78% through pre-calculated computing capacity allocations and execution of map files over respective Namenode and Datanodes.