• 시스템엔지니어링학술지
• /
• 제14권1호
• /
• pp.36-43
• /
• 2018

The availability of the weapon system can be analyzed through state modeling and simulation using the Markov process. In this paper, show how to analyze the availability of the weapon system and can use the Markov process to analyze the system's steady state as well as the RAM at a transient state in time. As a result of the availability analysis of tracked vehicles, the inherent availability was 2.6% and the operational availability was 1.2% The validity criterion was defined as the case where the difference was within 3%, and thus it was judged to be valid. We have identified the faulty items through graphs of the number of visits per state among the results obtained through the MPS and can use them to provide design alternatives.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.183-183
• /
• 2009

본 연구에선 ITO에 사용되는 Indium의 양을 줄이기 위해 ITO와 유사한 성질을 보이는 조성인 Indium - Zinc - Tin Turnary compound를 연구하였다. 각 조성은 Indium - Zinc - Tin Turnary compound를 기본으로 하여 Zinc site에 이종원소인 Al2O3와 Ga2O3를 doping함에 따라 변화되는 전기적 특성을 살며보았다. 분석에 사용한 Ceramic pellet은 일반적인 Ceramic process를 거쳐 제작되었다. 각 조성의 전기적 특성은 TCR meter와 Hall effect analyser를 이용하여 측정하였고, X-ray diffraction measurements(XRD), Scanning Electron microscope(SEM)를 이용하여 결정학적 특성을 분석하였다.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 1997년도 추계학술대회논문집 기업경쟁력 향상을 위한 정보통신 기술의 활용
• /
• pp.249-249
• /
• 1997

최근에 등장한 ERP system은 전사 자원을 통합 관리하여 생산성과 효율성을 크게 향상시켜 줄뿐만 아니라, package로 되어 있어 단기간에 system을 구축할 수 있게 해준다 는 측면에서 획기적인 system으로 많은 기업들의 주목을 받고 있다. ERP 뇬?은 C/S system으로의 downsizing, networking, internet/intranet, BPR의 수행, EIS 등 최근의 정보 기술을 망라하고 있기 때문이다. 그러나 module화된 package를 도입하기 위해서는 process를 package에 맞추어 줘야 하므로 필연적으로 BPR이 따르며 실제 도입사례를 보 더라도 system에 들어간 직접비용보다 표준화를 포함한 process 설계에 투자된 노력이 훨 씬 더 많다. 이제까지의 경험으로 볼 때, BPR은 성공보다 실패 확률이 더 높다. BPR의 실 패는 ERP system 도입에 치명적이다. BPR이 지금처럼 실패를 거듭한다면 ERP 또한 많은 장점에도 불구하고 성공하기 어렵다고 하겠다. 따라서 본 연구에서는 성공적인 ERP 도입을 위한 전제조건으로서의 process 재설계를 가로막는 요인은 무엇이며, 이를 극복하기 위한 대안으로서의 전략은 어떠해야 하는지 제시하고자 한다.

• 열처리공학회지
• /
• 제22권1호
• /
• pp.23-26
• /
• 2009

Pt nanotubes with diameter of 200 nm were fabricated by simple and convenient method of Template-Wetting Process. Porous alumina membranes were prepared by 2 step anodic oxidation as the template. To improve wetting properties and lower surface energy, pt solution was mixed with polymer. Polymer was removed completely during annealing. Grain growth process of pt nanotubes during baking and furnace annealing was examined by FE-SEM and XRD.

• 한국환경과학회지
• /
• 제15권6호
• /
• pp.571-577
• /
• 2006

This study make a comparison between the phosphorus removal performance of FNR(Ferrous Nutrient Removal) process and A/O process by the laboratory experiments. For simultaneous removal of phosphorus, iron electrolysis was combined with oxic tank. Iron precipitation reactor on the electrochemical behaviors of phosphorus in the iron bed. The phosphorus removal in FNR process was more than A/O process. Iron salts produced by iron electrolysis might help to remove COD and nitrogen. And the demanded longer SRT is the more removes the removes COD, nitrogen, and phosphorus. Also, FNR process of sludge quantity more reduce than A/O process to input cohesive agents.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.302-306
• /
• 1993

In this study, a new model for flexible disk grinding process will be proposed. A grinding mechanism with a grinding disk attached to the rubber platen has been introduced. Since the spinning axis is fixed and only the disk is deflected with respect to this axis, earlier model is not adequate to represent this proces. A new dynamic process model includes an assumption that the disk is deflected locally around the middle of its radial span between the spinning axis and the disk tip instead of several continuous deflection points along the radial span of the disk. Detailed kinematic analysis is proposed as for the removed portion during the process. Cutting force comonent and depth of cut profile trend is compared with the measured result.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.522-526
• /
• 1997

잔류 응력이 존재하는 부품의 가공 시에는 잔류 응력 상태가 새로운 평형 상태를 이루기 위해 재 분포되며 이는 가공 자체에 따른 변형 이와의 부가적 변형을 초래한다. 고도의 정밀도를 요하는 가공에는 이러한 잔류 응력에 의한 부가적 변형을 고려하여야 하며, 가공 후의 잔류 응력의 재 분포 상태는 가공 후 부품의 물질적 성능을 결정하는데 중요한 요소이므로 이를 예측할 수 있어야 한다. 본 연구에서는 잔류 응력에 의한 부가적 치수 변화를 고려한 가공 후의 부품의 내경 및 두께와 잔류 응력의 재 분포를 예측할 수 있는 이론적 수식을 제시하고 유한요소법에 의한 시뮬레이션의 결과와 비교하였다. 초기 잔류 응력의 분포는 autofrettage process에 의해 유도되었다.

• 대한기계학회논문집
• /
• 제1권2호
• /
• pp.89-94
• /
• 1977

So far, high accuracy in-process sensors have been used for controlling the cutting tool, but the method followed in this new system is guite different form previous processes. In this system, after the rough cut the mark indication the pasition of the finished size in put on the cutting surface of the workpiece by ultrasonic or vibration cutting. The cutting is then continued until the mark just disappears, This position being observed by the used of a simple in-proces sensor, The in-prosess sensor in used only to detect the existence or dis apperance of the mark.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.560-563
• /
• 2008

A modified polyol process is developed to enhance Pt loading during the preparation of Pt/C catalysts. With the help of the zeta potential, the effect of pH on the electrostatic forces between the support and the Pt colloid is investigated. It is shown experimentally that the surface charge on the carbon support becomes more electropositive when the solution pH is changed from alkaline to acidic. However, this change does not affect the electronegative surface charge of Pt colloids already attained and stabilized by glycolate anions. This new behavior caused by the change in the solution pH accounts for the enhanced yield of the process and does not affect the Pt particle size. All our experimental results reveal that this simple modification is a cost effective method for the synthesis of highly Pt loaded Pt/C catalysts for fuel cells.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.488-492
• /
• 1993

This paper proposes a new approach to the optimization method of a blending process with neural network. The method is based on the error backpropagation learning algorithm for neural network. Since the neural network can model an arbitrary nonlinear mapping, it is used as a system solver. A fuzzy membership function is used in parallel with the neural network to minimize the difference between measurement value and input value of neural network. As a result, we can guarantee the reliability and stability of blending process by the help of neural network and fuzzy membership function.