• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1097-1103
• /
• 2010

Injection pressure, an important factor in the filling procedure, should be minimized to enhance injection molding quality. In addition, warping deformation and weld lines, which are representative failures, should be avoided to enhance injection molding quality. To improve injection molding quality, the design procedure for an automotive fog blank cover is divided into two stages. In the first stage, we optimally obtain injection molding process variables that minimize injection pressure and warping deformation by using design of experiments, approximation and optimization techniques equipped in PIAnO (Process Integration, Automation and Optimization), a commercial PIDO (Process Integration and Design Optimization) tool. Then, we determine the thickness of the automotive fog blank cover that enables us to avoid generating weld lines. The design results we obtain in this study are found far better than those of the initial design, which demonstrates the effectiveness of our design method.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.575-585
• /
• 2016

This study aimed to prove that the effect of waiting environment on perceived waiting time and service quality evaluation of airline service procedure. Survey was conducted by questionnaires that were distributed to international airlines passengers who arrived at the airport. Totally, 300 samples were circulated, and 231 samples among those were collected. According to the results, the suggested hypotheses were accepted except the regulation effect of waiting acceptability. Physical environment has positive effect on the airport and boarding gate, and human environment has more positive effect in-flight service procedure. Thus, variables are correlated among waiting environment, perceived waiting time, and service quality evaluation of airline service. Acceptability as moderating variable has no effect due to passenger's pre awareness of estimated arrival and departure travel time certainly. At the end of this study, the results of this research can be conjugable on the airline industry, however, some limitations should be discussed by further study directions.

• Quality Improvement in Health Care
• /
• v.22 no.2
• /
• pp.43-73
• /
• 2016

Purpose: The aims of this study were to assess the presence of core patient safety practices in Korean hospitals and assess the differences in reporting and learning systems of patient safety, infrastructure, and safe practices by hospital characteristics. Methods: The authors developed a questionnaire including 39 items of patient safety staffing, health information system, reporting system, and event-specific prevention practices. The survey was conducted online or e-mail with 407 tertiary, general and specialty hospitals. Results: About 90% of hospitals answered the self-reporting system of patient safety related events is established. More than 90% of hospitals applied incidence monitoring or root cause analysis on healthcare-associated infection, in-facility pressure ulcers and falls, but only 60% did on surgery/procedure related events. More than 50% of the hospitals did not adopted present on admission (POA) indicators. One hundred (80.0%) hospitals had a department of patient safety and/or quality and only 52.8% of hospitals had a patient safety officer (PSO). While 82.4% of hospitals used electronic medical records (EMRs), only 53% of these hospitals adopted clinical decision support function. Infrastructure for patient safety except EMRs was well established in training, high-level and large hospitals. Most hospitals implemented prevention practices of adverse drug events, in-facility pressure ulcers and falls (94.4-100.0%). But prevention practices of surgery/procedure related events had relatively low adoption rate (59.2-92.8%). Majority of prevention practices for patient safety events were also implemented with a relatively modest increase in resources allocated. Conclusion: The hospital-based reporting and learning system, EMRs, and core evidence-based prevention practices were implemented well in high-level and large hospitals. But POA indicator and PSO were not adopted in more than half of surveyed hospitals and implementation of prevention practices for specific event had low. To support and monitor progress in hospital's patient safety effort, national-level safety practices set is needed.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.6
• /
• pp.789-794
• /
• 2014

The increasing cross-border mobility of dental school or dental hygiene students, educators, practitioners, programs and providers takes challenges for existing national quality assurance and accreditation frameworks and bodies, as well as for the systems for recognizing foreign qualifications. The new dental hygiene accreditation system was introduced to encourage the improvement of dental hygiene programs, to ensure the quality of education and, most of all, to establish an internationally compatible system of evaluation and accreditation. The accreditation procedure takes 1 year to complete. The result of the accreditation is released after evaluation via self-study report, site visit, preliminary draft report, responses from the institution and the results from the conciliation and review committees. The result from the accreditation procedure is either 'accreditation' or 'no accreditation'. Accredited schools receive one of several statuses following the evaluation. These are next general review, interim report and interim visit or suspension. Dental healthcare quality is not improved instantaneously, but instead gradually through continuous communication within the dental field. For this accreditation system to be successful, the following are essential: the accreditation agency should adopt hygiene education accreditation; it needs to become financially independent and managed efficiently; the autonomy and regulations surrounding the system need to be balanced; the professionalism of the system is ensured; and the dental field which includes not only dental program, but also hygiene program, needs to play an active role in the operation of the system.

• Progress in Medical Physics
• /
• v.26 no.3
• /
• pp.185-191
• /
• 2015

As radiation therapy is one of three major cancer treatment methods, many cancer patients get radiation therapy. Because of the invisible and scattering characteristics of radiation, it is impossible to identify the quality and the amount of radiation and secondary cancer could be induced by scattered radiation. Because of advanced technique of radiation therapy and the reasons mentioned above, quality assurance of radiotherapy machine should be performed completely. International organizations such as International Atomic Energy Agency (IAEA), American Association of Physicists in Medicine (AAPM) suggest report of quality assurance to recommend united method of radiotherapy machine quality assurance. Domestic society of medical physics, however, is too small to make such a report, domestic hospitals selectively choose some of contents in global suggestions. As there are no suggestions for domestic hospitals and global suggestions are being updated, we did a survey about quality assurance for radiotherapy machine. The questionnaire is composed of possession of radiotherapy machine, items performed for quality assurance and manpower, etc. 37 of 72 hospitals answered to survey. These results could be used for making domestic standard quality assurance procedure.

• Agricultural and Biosystems Engineering
• /
• v.7 no.1
• /
• pp.8-12
• /
• 2006

This study was conducted to develop a real-time internal quality evaluation technique for Korean red ginseng using NIR spectroscopy while they were moving to be graded. Internal qualities of Korean red ginseng were defined by color, amount of white core and cavity in the red ginseng. To evaluate the internal quality, PLS (Partial Least Square) model was developed. Spectrum saturation can be occurred when most red ginseng has a sound internal quality expressed by higher light transmittance ratio, but that could not found in the ginseng of internal white core under the same light situation. And, if spectrum saturation is obtained, it is hard to identify the exact information of internal quality. In order to evaluate of the internal quality regardless of having internal normal core or white core, an integral time controlled method was used to obtain traditional spectrum. This procedure was applied in real-time process when red ginseng was moving to be graded in the line. Among the 450 samples including 223 internal normal ginsengs and 227 internal white core ginsengs, 315 ginsengs (70%) were used to develop a calibration model and 135 ginsengs were spent to validate the model. The result of quality evaluation by the model was very good showing SEP and bias were 0.3573 and 0.0310, respectively, and the accuracy was 95.6%.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.3
• /
• pp.235-242
• /
• 2008

This paper proposes a method for improving the process plan quality by use of dimensional tolerances. Dimensioning and tolerancing plays a key role in manufacturing process plan because the final part must ensure conformance with the dimensions and tolerances in its drawing. As a first step for the improvement of process plan quality, two resultant tolerances in design and process plan should be compared each other, and so a tolerance chart is used for acquisition and comparison of the two tolerances. In addition to two kinds of design and manufacturing tolerances, operational sequences or paths for the resultant dimension and tolerance are additionally recognized for measuring the quality of process plan quantitatively. Rooted tree is applied to find the related paths for the manufacturing resultant tolerances. A quality coefficient is defined by the components of two tolerances and their relations, the paths related to manufacturing resultant tolerances and the difficulty of an operation. In order to improve the quality of manufacturing process plan, the paths that two kinds of tolerances are the same or different in the rooted tree are recognized respectively and a method for tolerance rearrangement is developed. A procedure for improving the quality is suggested by combining the coefficient and the tolerance rearrangement method. A case study is applied to illustrate the efficiency of improvement method.

• The Korean Journal of Health Service Management
• /
• v.7 no.2
• /
• pp.53-67
• /
• 2013

This study aims to analyze the effect of quality of health care on perceived value, patient satisfaction and revisit intention. Especially, it was focused on outdoor environment, admission procedure, hospital image, service quality of physicians that patients perceived. For inpatients, hospital image and service quality of medical technicians have an effect on perceived value. Service quality of physicians has an effect on the patient satisfaction. For outpatients, hospital image and service quality of physicians and medical technicians have an effect on perceived value. Outdoor environment, hospital image, service quality of physicians and medical technicians, and perceived value have an effect on patient satisfaction. Perceived value and patient satisfaction have an effect on revisit intention. They should evaluate customer satisfaction on their services and analyze various factors that affect on it to improve specialty hospitals.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.353-360
• /
• 2019

Technology-driven development of a new system makes it difficult for users and stakeholders to identify or intervene in the development process, resulting in systems with unnecessary functions and poor quality services. Applying the software architecture design process to the initial design of the navigation system platform of autonomous ships enables the development of a system that reflects the required functions and service quality of the stakeholders. The design, which includes all of the subsystems that make up an autonomous ship platform, is close to an enterprise architecture. Thus, we strived to design a navigation system platform suitable for the design range of the software architecture. This study analyzed the definition of functional requirements, and quality attributes by applying the software architecture design procedure. This study was conducted to identify the characteristics of the navigation system and platform needs, and the stakeholders were identified. To derive the functional requirements and constraints of the platform, a quality attributes workshop was held engaging stakeholders, and the results of the analysis of functional requirements and quality attributes were listed. Based on the results of this study, the architect can establish the evidence and technical solutions that are integral for the architecture development, and will facilitate the creation of quality attribute scenarios.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.43-49
• /
• 2006

In this paper, an index for the evaluation of a vehicle intake booming noise and intake sound quality were developed through a correlation analysis and a multiple factor regression analysis of objective measurement and subjective evaluation data. At first, an intake orifice noise was measured at the wide-open throttle test condition. And then, an acoustic transfer function between intake orifice noise and interior noise at the steady state condition was estimated. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 intake noise and vibration expert evaluators. Next, the correlation analysis between the psychoacoustic parameters derived from the measured data and the subjective evaluation was performed. The most critical factor was determined and the corresponding index for intake booming noise and sound quality are obtained from the multiple factor regression method. And, the optimal design of intake system was studied using the booming noise and the sound quality evaluation index for expectation performance of intake system. Conclusively, the optimal designing parameters of intake system from noise level and sound quality whose point of view were extracted by adapting comparative weighting between the booming noise and sound quality evaluation index, which optimized the process. These work could be represented guideline to system engineers, designers and test engineers about optimization procedure of system performance by considering both of noise level and sound quality.