• 품질경영학회지
• /
• 제50권3호
• /
• pp.533-543
• /
• 2022

Purpose: The purpose of this study is to identify and resolve the causes of defects in the unmanned aerial vehicle launch system(propulsion wire fracture, rear rail deformation) and to prevent recurrence. Methods: The causes of the two defects were derived through fault tree analysis for each of the two defects and fault reproduction tests. In the case of propulsion wire, the installation of a high speed camera to check the behavior of wire was the driving force behind the defect resolution. Results: The results of this study are as follows; It was determined that the thickness of the washer was less than the maximum tolerance of the pulley was the cause of the propulsion wire fracture defect. Failure to comply with the launch procedure and insufficient safety margin were judged as the cause of the rear rail deformation defect. Accordingly, the configuration was changed to remove each defect. Conclusion: The case of this study was conducted to eliminate defects in the launch system for UAV. The causes of defects were estimated through fault tree analysis. After the configuration change, Structural analysis and launch tests were performed to demonstrate the safety and effectiveness of the modified configuration. As a result, the effect of the modified configuration was verified.

• Restorative Dentistry and Endodontics
• /
• 제46권1호
• /
• pp.8.1-8.7
• /
• 2021

Objectives: The reliability and educational quality of videos on YouTube for patients seeking information regarding instrument separation in root canal treatment were evaluated. Materials and Methods: YouTube was searched for videos on instrument separation in root canal treatment. Video content was scored based on reliability in terms of 3 categories (etiology, procedure, and prognosis) and based on video flow, quality, and educational usefulness using the Global Quality Score (GQS). Descriptive statistics were obtained and the data were analyzed using analysis of variance and the Kruskal-Wallis test. Results: The highest mean completeness scores were obtained for videos published by dentists or specialists (1.48 ± 1.06). There was no statistically significant difference among sources of upload in terms of content completeness. The highest mean GQS was found for videos published by dentists or specialists (1.82 ± 0.96), although there was no statistically significant correlation between GQS and the source of upload. Conclusions: Videos on YouTube have incomplete and low-quality content for patients who are concerned about instrument separation during endodontic treatment, or who experience this complication during endodontic treatment.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.13-22
• /
• 2020

Reinforcement steel fixing is a skilled and manually intensive construction trade. Current practice for the quality assessment of reinforcement steel fixing is normally performed by fabricators and has high potential in having errors due to the tedious nature of the work. In order to overcome the current inspection limitation, this study presents an approach that provides visual assistance and inspection enhancement for inspectors to assess the dimensional layout of reinforcement steel fixing. To this end, this study aims to establish an end-to-end framework for rebar layout quality inspection using laser scanning and Augmented Reality (AR). The proposed framework is composed of three parts: (1) the laser-scanned rebar data processing; (2) the rebar inspection procedure integrating with AR; and (3) the checking and fixing the rebar layout through AR visualization. In order to investigate the feasibility of the proposed framework, a case study assessing the rebar layout of a lab-scaled formwork containing two rebar layers is conducted. The results of the case studies demonstrate that the proposed approach using laser scanning and AR has the potential to produce an intuitive and accurate quality assessment for the rebar layout.

• 품질경영학회지
• /
• 제51권4호
• /
• pp.735-749
• /
• 2023

Purpose: The purpose of this study is to derive solutions and prevent similar cases from occurring by analyzing the causes of cracks found in temperature cycling tests of rocket motor. Methods: By combining the results of the current state confirmation test, non-destructive test, domestic and foreign rocket motor comparison test, cutting test, and adhesion test according to the number of times to apply mold release agent, a Cause and Effect Diagram analysis was performed to derive the cause of cracks. Results: Through this study, 26 factors that could cause cracking in rocket motors during temperature cycling tests were identified. Through various additional test results, a total of five causes were identified, including chemical and structural design of the joint between the propellant and stress relief insert, omission of procedure in the manufacturing procedures, natural aging due to temperature, and load accumulation due to temperature changes. The fundamental cause was confirmed to be insufficient consideration of the release properties of the propellant and stress relief insert. Conclusion: During the design process, it was confirmed that this could be solved by structurally or chemically designing the insert so that it does not combine with the propellant, or by applying a mold release agent during the manufacturing process.

• 유통과학연구
• /
• 제16권12호
• /
• pp.81-93
• /
• 2018

Purpose - The purpose of this study was to propose a specific and empirical continuous transaction strategy through service quality of improvement to small and medium Korean companies whose main business is B2B distribution and sale of general-purpose SW. Research design, data, and methodology - The research procedure is largely divided into two phases. In the first phase, the service quality, the customer satisfaction, and the continuous transaction research hypothesis and the verification are carried out. Experimental data were collected from 450 companies, CEO companies of SMEs innovation institutes, and 510 companies from medium and large enterprises. From September 15 to October 5, 2015, 215 questionnaires were used. And research hypothesis and test were conducted by SPSS SW Ver. 20. Results - The results of the study confirm that service quality has a positive effect on customer satisfaction and continuous transaction: as the detailed items for improving the service quality, 'responsiveness', 'assurance' and 'empathy' have been adopted. Therefore, there are critical factors of a company's survival through continuous transaction. Conclusions - Through this study, we confirmed that the survival of small businesses require continuous improvement in service quality. Among the factors improving service quality, empathy means service satisfaction of customers; so, it is necessary to continuously improve it by evaluating customer satisfaction. Responsiveness means rapid response to customer needs and reliability; it is necessary to enhance customer responsiveness by continuous job training and service training. Finally, assurance is the same as sales product or after service. This means that it is necessary to not only issue the "supply contract," but also improve the reliability of the sales product by securing the competence of the consulting professional. However, because the service quality measurement factors selected in this study are the measurement factors that are mainly applied to large companies or those in the service industries, it is important to consider the type of sales of software distribution companies.

• 한국환경과학회지
• /
• 제16권5호
• /
• pp.623-632
• /
• 2007

The objective of this study is analysis of Andong-Dam lake water quality with water quality model. Model parameters of the WASP applied to Lake Andong-Dam were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating parameters by a trial-and-error procedure. Water qualify system for modeling consisted of BOD, DO, T-N, T-P. The results of water quality modelling using WASP. T-N was maximum affected by K71C(Organic nitrogen mineralization rate) parameter. T-P was maximum affected by K83C(Dissolved organic phosphorus mineralization) parameter, and It did not show a difference almost from the parameter of others and it omitted. BOD was maximum affected by Temperature parameter, it was visible of the reaction due to the KDC(Deoxygenation rate) in afterwords, and it did not show a difference from the parameter of others and it omitted. DO was maximum affect by Temperature parameter, and It did not show a difference almost from the parameter of others and it omitted. The parameter which it presumes from the this study uses a water quality modeling and Actual value and the result with which it compares, error rate the parameter presumption which is appropriate with 1% interior and exterior is investigated, It will reach and it uses and it will be able to apply to the suitable parameter in water quality modelling of the objective area which can be feeded by it becomes.

• Journal of Chest Surgery
• /
• 제21권5호
• /
• pp.929-934
• /
• 1988

Progressive systemic sclerosis is a disease of unknown origin and uncommon in the east area. We experienced one case of severe peptic esophageal stricture due to esophageal scleroderma. The patient`s life quality was improved with the esophageal reconstructive procedure using reversed tubed gastric pedicle and his body weight was normalized with regular diet.

• 말소리와 음성과학
• /
• 제3권2호
• /
• pp.89-96
• /
• 2011

In this paper, details of the design and implementation of a voice source simulator using Simulink and Matlab are discussed. This simulator is an implementation by model-based design concept. Voice sources can be analyzed and manipulated through various factors by choosing options from GUI input and selecting pre-defined blocks or user created ones. This kind of simulation tool can simplify the procedure of analyzing speech signals for various purposes such as voice quality analysis, pathological voice analysis, and speech coding. Also, basic analysis functions are supported to compare the original signal and the manipulated ones.

• Journal of applied mathematics & informatics
• /
• 제6권2호
• /
• pp.539-552
• /
• 1999

An order-level inventory model for a perishable product with a time-dependent demand is developed for a fixed planning pe-riod allowing backlogging in all cycles within the said period. The market demand is assumed to decrease exponentially as time elapses. The average system cost is derived and its optimization procedure is illustrated with a numerical example. Sensitivity of the optimal so-lution to changes in the values of different parameters of the system is also analysed.

• Management Science and Financial Engineering
• /
• 제10권2호
• /
• pp.89-102
• /
• 2004

In this paper, we deal with a processor assignment problem that minimizes the total traffic load of an ATM switch controller by optimally assigning processors to ATM interface units. We develop an integer programming (IP) model for the problem, and devise an effective tabu search heuristic. Computational results reveal the efficacy of the proposed tabu search procedure, finding a good quality solution within 5% of optimality gap.