• International Journal of Automotive Technology
• /
• 제4권2호
• /
• pp.65-75
• /
• 2003

A HEV evaluation program, funded by ADEME, was carried out by a group of Laboratories of different specialties in order to evaluate and compare consumption, emission and component technologies of the three first HEVs put on the market (Toyota Prius, Nissan Tino and Honda Insight). This paper presents the results obtained until now. These results show good consumption and emission performance of the tested vehicles compared to conventional ones. The energy management seems to be globally the same for the three vehicles excepting for cold stans where the Insight allows a very earlier stop of the engine compared to the Tino and especially to the Prius. A mapping of the engine consumption of the Prius and the Insight was performed in order to furnish data for the simulation models. The Permanent Magnet motors of the Prius and Tino have different number of pair poles and then different emf at a given speed. The low emf values of the Prius allow operation at high speed with less field weakening control than for the Tino. The inverters of the Prius and the Tino, controlled by a PWM at respectively 5 kHz and 7 kHz switching frequency, are made of IGBTs with high commutation performances.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.97-106
• /
• 2011

Both an optimal design of the engine operating strategy and fuel economy prediction technique for a HEV under the vehicle driving condition are very crucial for the development of vehicle fuel economy performance. Thus, in this study, engine operating characteristics of PRIUS III were analyzed with vehicle running conditions and the correlations between vehicle tractive power and fuel consumption were introduced. As a result, fuel economy performance of PRIUS III with various test modes were predicted and verified. Errors of predicted fuel economy were between -5% and -1%.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.537-540
• /
• 2005

A battery is the primary energy source device presently used in hybrid electric vehicle. It can store much energy, but cannot provide enough current without inefficient units. However, an ultracapcitor can provide much current, but cannot store much energy. It will have better fuel economy by combining the two energy sources in parallel. The purpose of this paper is making the simulator of the two HEV systems. The one has only battery, the other have battery and ultarcapacitor in parallel. To compare the fuel economy, dynamic programing was used for optimization and prius was used for HEV model.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1431-1438
• /
• 2013

A pack-level battery hardware-in-the-loop simulation (B-HILS) platform is implemented. It consists of dynamic vehicle models using PSAT and multiple control interfaces including real-time 3D driving and GPS mode. In real-time 3D driving mode, user can drive a virtual vehicle using actual drive equipment such as steering wheel and accelerator to generate the cycle profile of the battery. In GPS mode, actual road traffic and terrain effects can be simulated using GPS data while the trajectory is displayed on Google map. In the latter part of the paper, several performance tests of an actual lithium-polymer battery pack are carried out utilizing the developed system. All experiments are conducted as parts of actual development process of a commercial battery pack adopting 2nd generation Prius as a target vehicle model. Through the experiments, the low temperature performance and fuel efficiency of the battery are quantitatively investigated in comparison with the original nickel-metal hydride (NiMH) pack of the Prius.

• 한국산학기술학회논문지
• /
• 제12권4호
• /
• pp.1575-1580
• /
• 2011

Toyota사의 PRIUS THS 시스템을 이용하여 HEV 알고리즘 분석을 통한 THS의 주행 모드 변환에 따른 실시간 모니터링 시스템을 개발하고자 한다. 병렬형 하이브리드 시스템의 경우에 엔진과 전동기를 주행 상태 최적인 상태로 운행하기 위해서는 다양한 제어전략이 필요하다. 본 연구를 통하여 주행 가능한 THS 차량의 주행에 필요한 입 출력 정보를 실시간적으로 모니터링할 수 있는 시스템을 개발한 결과, 하이브리드 자동차의 동력 분할 및 에너지 활용을 극대화시키기 위한 수단의 하나로 차량의 주행모드 변화에 따른 각 구성요소의 동작 상태를 모니터링 가능하게 되었다. 개발된 시스템은 제어전략의 체계적인 수립과 실시간 데이터 분석이 가능하기 때문에 HEV자동차의 알고리즘 분석해석을 통해 HEV자동차의 개발 기반에 유용하게 활용될 것이다.

• 신재생에너지
• /
• 제2권2호
• /
• pp.23-27
• /
• 2006

The power split hybrid powertrain is considered to be one of the most prospective configuration for the hybrid electric vehicle (HEV). Toyota Prius, representing this type of vehicle, showed outstanding performances in fuel efficiency, emission reduction and acceleration. The excellence is largely due to the fact that it utilizes almost all operation modes of HEV. Those modes include ZEV (Zero Emission Vehicle) driving, idle stop, fuel cut-off, power assist, active charging, regenerative braking and so forth. In this paper, a few of the mode operations were simulated using AVL Cruise. Also, control logics to operate the powertrain in each mode were developed. The states of powertrain components were displayed and analyzed. By controlling the three components (engine, motor and generator), it was possible to run the powertrain in several hybrid operation modes.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1096-1106
• /
• 2013

This paper presents the control of a Permanent Magnet Electric Variable Transmission (PM-EVT) for Hybrid Electric Vehicles (HEVs). Consisting of two electric machines, the EVT realizes the power split function in an electromagnetic way rather than in a mechanical way. A specific PM-EVT has been designed for Toyota Prius II. The control scheme of the entire vehicle is deduced using the Energetic Macroscopic Representation methodology. The energy management strategy yields local control references. A specific attention is paid for the field weakening for wide speed range. Simulation results are provided to illustrate the EVT modeling and control.

• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.771-780
• /
• 2007

In recent studies, various types of multi mode electric variable transmissions of hybrid electric vehicles have been proposed. Multi mode electric variable transmission consists of two or more different types of planetary gear hybrid powertrain system(PGHP), which can change its power flow type by means of clutches for improving transmission efficiencies. Generally, the power flows can be classified into three different types such as input split, output split and compound split. In this study, we analyzed power transmission characteristics of the possible six input split systems, and found the suitable system for single or multi mode hybrid powertrain. The input split system used in PRIUS is identified as a best system for single mode, and moreover we identified some suitable systems for dual mode.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1980-1990
• /
• 2017

A study on the multi-objective optimization of Interior Permanent-Magnet Synchronous Motors (IPMSMs) with 2, 3, 4 and 5 flux barriers per magnetic pole, based on Genetic Algorithm (GA) is presented by considering the aspect of irreversible demagnetization. Applying the 2004 Toyota Prius single-layer IPMSM as the reference machine, the asymmetrical two-, three-, four- and five-layer rotor models with the same amount of Permanent-Magnets (PMs) is presented to improve the torque characteristics, i.e., reducing the torque pulsation and increasing the average torque. A reduction of the torque pulsations is achieved by adopting different and asymmetrical flux barrier geometries in each magnetic pole of the rotor topology. The demagnetization performance in the PMs is considered as well as the motor performance; and analyzed by using finite element method (FEM) for verification of the optimal solutions.

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4283-4287
• /
• 2011

본 논문은 현재 출시되어 있는 소프트타입의 현대 아반테 하이브리드자동차와 하드타입 방식의 도요다 프리우스 자동차를 대상으로 차대 동력계상에서 CVS-75 모드를 주행하면서 발생하는 배출가스특성과 연비특성을 실험적으로 분석하였다. 가솔린 차량에 비해 하이브리드 차량의 연비 및 배출가스 특성이 탁월하였으며 특히, 하드타입의 하이브리드 차량이 소프트타입의 차량에 비해 연비개선효과가 우수하게 나타났다.