• International Journal of Concrete Structures and Materials
• /
• 제7권4호
• /
• pp.253-264
• /
• 2013

A major difference between high-strength reinforcing steel and conventional steel in concrete is that the service-load steel stress is expected to be greater. Consequently, the service-load steel strains are greater affecting cracking behavior. A parametric study investigating crack widths and patterns in reinforced concrete prisms is presented in order to establish limits to the service-load steel stress and strain. Additionally, based on the results of available flexural tests, crack widths at service load levels were evaluated and found to be within presently accepted limits for highway bridge structures, and were predictable using current AASHTO provisions. A limitation on service-level stresses of $f_s{\leq}414$ MPa (60 ksi) is nonetheless recommended.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.693-696
• /
• 2009

The ray-tracing technique was used to optimize the light guide plate for the purpose of improving the on-axis luminance on the edge-lit backlights. One-dimensional prisms and engraved V-shaped patterns were applied to the upper and the lower surfaces of the light guide plate, respectively. By optimizing the apex angles of these micro-structures, as well as the shape of the reverseprism film put over the light guide plate, highly-collimated light-output distribution could be obtained on the backlight, which may contribute to the development of mobile LCD's with low power consumption.

• 한국광학회지
• /
• 제11권1호
• /
• pp.43-46
• /
• 2000

Kerr 렌즈 모드록킹된 티타늄 사파이어 레이저에서 상용화된 광학부품만을 이용하여 9 fs의 펄스를 생성하였다. 공진기 내부와 출령경을 지나면서 발생하는 군속도 분산을 각각 용융 프리즘 쌍을 이용하여 보상하였고, 넓은 스펙트럼을 얻기 위하여 광대역 거울을 사용하였다. 이전에 사용했던 광대역 거울과 반사율을 비교해 봄으로서 10fs 미만의 극초단 펄스를 생성하기 위해서는 180nm 이상의 넓은 반사대역을 갖는 거울을 선택하는 것이 필수적임을 확인하였다.

• 자원환경지질
• /
• 제18권2호
• /
• pp.159-166
• /
• 1985

Multipole 확장에 의한 중력이상의 계산식이 유도되고, 직각 prism과 원기둥 모양의 물체에 대하여 중력을 계산하며 정확한 계산과 비교 연구를 한다. 근거리에 있는 source의 multipole확장은 표면적분보다 체적적분이 더 좋은 근사치를 얻게한다. 그렇지만 지구물리탐사의 실제에 있어 흔히 나타나는 원거리의 source에 대해서는 이 두 접근 방법은 서로 일치하게 됨을 알 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제16권9호
• /
• pp.870-873
• /
• 1995

A new ternary transition-metal selenide, Ta2Ni3Se8 has been synthesized from a eutectic halide flux. The structure of this phase has been characterized by single crystal X-ray diffraction techniques. The compound crystallizes in the orthorhombic system (D2h9-Pbam, a= 14.788(4) Å, b= 10.467(3) Å, c=3.4563(8) Å) with two formula units in the unit cell. This compound adopts the Nb2Pd3Se8 structure type. Hence, there are two chains of edge-sharing selenium trigonal prisms centered by tantalum atoms and these chains are interconnected through two kinds of nickel atoms. Nickel occupies both square planar and square pyramidal sites as does palladium in Nb2Pd3Se8. Electrical conductivity measurements indicate that this material is semiconducting.

• Wind and Structures
• /
• 제21권4호
• /
• pp.383-405
• /
• 2015

This study investigated aerodynamic characteristics of an inclined square prism experimentally. Pressure measurements were performed on a static square prism with a series of inclinations including forward inclinations (inclined to the upwind direction) and backward inclinations (inclined to the downwind direction). The prism with a vertical attitude was also tested for comparisons. Based on the pressure data, influences of the inclinations on aerodynamic characteristics (e.g., force coefficients, pressure distributions on the surfaces, and vortex shedding features) of the square prism were evaluated in detail. The results show that the inclinations have significant effects on these aerodynamic characteristics. Furthermore, the influences of the forward and backward inclinations are quite different.

• Wind and Structures
• /
• 제16권6호
• /
• pp.603-616
• /
• 2013

This study is aimed at formulating an empirical equation for the across-wind fluctuating moment and spectral density coefficient, which are needed to estimate the across-wind dynamic responses of tall buildings, as a function of the side ratios of buildings. In order to estimate an empirical formula, wind tunnel tests were conducted on aero-elastic models of the rectangular prisms with various aspect and side ratios in turbulent boundary layer flows. In this paper, criteria for the across-wind fluctuating moment and spectral density are briefly discussed and the results are analyzed mainly as a function of the side ratios of the buildings. Finally, empirical formulas for the across-wind fluctuating moment coefficient and spectral density coefficient according to variation of the aspect ratio are proposed.

• 한국임상보건과학회지
• /
• 제9권2호
• /
• pp.1520-1525
• /
• 2021

Purpose. This study conducted visual function training for children under 12 years of age who relapsed after surgery for intermittent exotropia. We are trying to find out whether the visual function has been improved by visual function training. Methods. After surgery, the subject with recurrent exotropia was given a prescription for refractive error, followed by visual function training and vision therapy with visual sence using prisms and lenses. Results. The subjects' positive relative convergence improved to 19.69𝚫, corrected visual acuity improved to 0.88, and stereoscopic vision function improved to 53.08 arc second. It was found that the smaller the angle of deviation at the time of recurrence after surgery, the better the vision therapy effect. Conclusions. It can be seen that visual function training is helpful in improving visual function, and the importance of visual function training can be known.

• Steel and Composite Structures
• /
• 제39권3호
• /
• pp.291-306
• /
• 2021

Based on Reissner's mixed variational theorem (RMVT), the authors develop a semi-analytical finite element (FE) method for a three-dimensional (3D) bending analysis of nonhomogeneous orthotropic, complete and incomplete toroidal shells subjected to uniformly-distributed loads. In this formulation, the toroidal shell is divided into several finite annular prisms (FAPs) with quadrilateral cross-sections, where trigonometric functions and serendipity polynomials are used to interpolate the circumferential direction and meridian-radial surface variations in the primary field variables of each individual prism, respectively. The material properties of the toroidal shell are considered to be nonhomogeneous orthotropic over the meridianradial surface, such that homogeneous isotropic toroidal shells, laminated cross-ply toroidal shells, and single- and bi-directional functionally graded toroidal shells can be included as special cases in this work. Implementation of the current FAP methods shows that their solutions converge rapidly, and the convergent FAP solutions closely agree with the 3D elasticity solutions available in the literature.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.243-247
• /
• 2019

We have developed a compact, wavelength-selectable, Q-switched Nd:YAG laser at mid ultraviolet for chemical warfare agent detection. The fundamental wave at 1064 nm is delivered by a pulsed solid state laser incorporating with a square-type Nd:YAG rod in a resonator closed by two crossed Porro prisms for environmental reliability. The output energy at 213 nm ($5{\omega}$) and 266 nm ($4{\omega}$) by ${\chi}^{(2)}$ process in the sequentially disposed BBO crystals are measured to be 6.8 mJ and 15.1 mJ, respectively. The output wavelength is selected for $5{\omega}$ and $4{\omega}$ by a motorized wavelength switch. The energy ratio of the $5{\omega}$ to the $4{\omega}$ is varied from 0.05 to 0.85 by controlling the phase matching temperature of the nonlinear crystal for sum-frequency generation without change of the output pulse parameters.