• 천문학논총
• /
• 제8권1호
• /
• pp.17-31
• /
• 1993

In order to check whether the 4-degree objective prism spectra can be used for deep spectroscopic studies of galactic structure, we measured the Rose(1984)'s seven indices between 3500 A and 4400 A for 19 Hyades stars on the Kiso Schmidt prism plate, K3496. By comparing the $4^{\circ}$-indices with those of Rose(1984), we have found that $H{\delta}/FeI$, $H{\gamma}/4325$, and P(3912)/P(CN) measured on the 4-degree prism spectra, are still useful for the derivation physical parameters.

• Wind and Structures
• /
• 제23권2호
• /
• pp.127-142
• /
• 2016

Aerodynamic effects, such as drag force and flow-induced vibration (FIV), on civil engineering structures can be minimized by optimally modifying the structure shape. This work investigates the turbulent wake of a square prism with its faces modified into a sinusoidal wave along the spanwise direction using three-dimensional large eddy simulation (LES) and particle image velocimetry (PIV) techniques at Reynolds number $Re_{Dm}$ = 16,500-22,000, based on the nominal width ($D_m$) of the prism and free-stream velocity ($U_{\infty}$). Two arrangements are considered: (i) the top and bottom faces of the prism are shaped into the sinusoidal waves (termed as WSP-A), and (ii) the front and rear faces are modified into the sinusoidal waves (WSP-B). The sinusoidal waves have a wavelength of $6D_m$ and an amplitude of $0.15D_m$. It has been found that the wavy faces lead to more three-dimensional free shear layers in the near wake than the flat faces (smooth square prism). As a result, the roll-up of shear layers is postponed. Furthermore, the near-wake vortical structures exhibit dominant periodic variations along the spanwise direction; the minimum (i.e., saddle) and maximum (i.e., node) cross-sections of the modified prisms have narrow and wide wakes, respectively. The wake recirculation bubble of the modified prism is wider and longer, compared with its smooth counterpart, thus resulting in a significant drag reduction and fluctuating lift suppression (up to 8.7% and 78.2%, respectively, for the case of WSP-A). Multiple dominant frequencies of vortex shedding, which are distinct from that of the smooth prism, are detected in the near wake of the wavy prisms. The present study may shed light on the understanding of the underlying physical mechanisms of FIV control, in terms of passive modification of the bluff-body shape.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2670-2680
• /
• 1996

Effeccs of porous wind fence on surface-pressure around 2-dimensional prism model of triangular cross-section were investigated experimentally. The pressure data were obtained at a Reynolds number based on the model height of Re=2.1*10$^{5}$ . Flow visualization also carried out to investigate the flow structure qualitatively. The mean velocity and turbulent intensity profiles measured at fence location were well fitted to the neutral atmospheric surface boundary layer over the open terrain. Various fences with different porosity and height were tested to investigate their effects on the surface pressure acting on a prism model at different locations. As the results, porous fence with porosity 40 ~ 50% is most effective for abating wind erosion. With decreasing porosity of the fence, pressure fluctuations on the model surface are increased. The mean pressure coefficients are decreased only when the fence height is greater than the model height. The effect of distance between wind fence and triangular prism was not significant, compared to that of the fence porosity and height.

• 대한건축학회논문집:구조계
• /
• 제36권2호
• /
• pp.127-136
• /
• 2020

Prism compressive strength is the most influential parameter to evaluate the seismic performance of non-structural concrete brick masonry walls, and is affected by the practice and workmanship of masonry workers. This study experimentally investigates the influence of workmanship on prism compressive strength throughout the compressive test with prism specimens constructed according to masonry workmanship. To do this, the workmanship is categorized into good, fair, and poor conditions which are statistically evaluated with thickness and indentation depth of bed-joints. Then, the effect of workmanship on the structural properties of masonry prisms is evaluated by investigating relations between properties such as their compressive strength, elastic modulus and numerical parameters such as thickness, filling of bed-joints. This study demonstrates that the indentation depth is more important parameter for structural properties of masonry prisms and masonry prisms with loss in bed-joint area less than of 7% can be in fair condition.

• Wind and Structures
• /
• 제26권6호
• /
• pp.369-382
• /
• 2018

Tornadoes are vertical swirling air formed because of the existence of layers of air with contrasting features of temperature, wind flow, moisture, and density. Tornadoes induce completely different wind forces than a straight-line (SL) wind. A suitably designed building for an SL wind may fail when exposed to a tornado-wind of the same wind speed. It is necessary to design buildings that are more resistant to tornadoes. In tornado-damaged areas, dome buildings seem to have less damage. As a dome structure is naturally wind resistant, domes have been used in back yards, as single family homes, as in-law quarters, man caves, game rooms, storm shelters, etc. However, little attention has been paid to the tornadic wind interactions with dome buildings. In this work, the tornado forces on a dome are computed using Computational Fluid Dynamics (CFD) for tornadic and SL wind. Then, the interaction of a tornado with a dome and a prism building are compared and analyzed. This work describes the results of the tornado wind effect on dome and prism buildings. The conclusions drawn from this study are illustrated in visualizations. The tornado force coefficients on a dome building are larger than SL wind forces, about 120% more in x- and y-directions and 280% more in z-direction. The tornado maximum pressure coefficients are also higher than SL wind by 150%. The tornado force coefficients on the prism are larger than the forces on the dome, about 100% more in x- and y-directions, and about 180% more in z-direction. The tornado maximum pressure coefficients on prism also are greater those on dome by 150% more. Hence, a dome building has less tornadic load than a prism because of its aerodynamic shape.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.83-88
• /
• 2000

multi-beam optical drive is a method to improve the data transfer rate for the optical disc systems by parallel recording and reading on neighboring multi-tracks. In this paper, the beam rotating actuator, which is necessary for the multi-bean optical disc drive to from beam spots on multi-tracks simultaneously, has been developed. The Voice Coil Motor is used as a drive mechanism for high resolution and small size of the actuator. And rotating guide based on link structure is designed for frictionless and axisless rotation of rotating part including dove prism and for rotating in axis of geometric center of dove prism. The characteristics of the actuator are experimented by laser vibrometer, Polytec OFV1102 and a dynamic analyzer, HP35670A. It shows that the actuator has good linearity, rotating range $\pm0.34^\circ$, minimum rotating angle $0.0066^\circ$and natural frequency 113.9Hz. Therefore the actuator can be applied in a multi-beam optical disc system.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.478-483
• /
• 2009

An optical sheet with a cone array is designed, simulated, and fabricated in order to substitute the dual crossed prism sheets in the edge-type LCD backlight. The optimum structure of cone textures that is compatible with the dual crossed prism sheets was obtained by simulating the backlight installed with the cone array optical sheet. A SU-8 photoresist films of thickness $30{\sim}50{\mu}m$ were spin-coated on a polyethylene terephtalate film (PET), and the cone texture array was formed by using the diffuse lithography that employed a photomask with circular patterns and an optical diffuser.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.152-157
• /
• 2009

The structure of the prism sheet and the reflective polarizer sheet in the direct - illumination liquid crystal display (LCD) backlight is optimized and fabricated. The apex angle of the prism sheet was changed from 90 degree to 96.5 and 101.5 degree and the angular spread of the diffuser films attached on the reflective polarizer sheet was changed from 7 to 1.5 degrees. The measured view angle, the normal luminance, and the contrast ratio from the optimized backlight unit showed improved optical performances.

• 한국콘텐츠학회논문지
• /
• 제11권9호
• /
• pp.63-75
• /
• 2011

분산 이동 실시간 시스템을 개발하기 위해 pi-Calculus, Mobile Ambients Calculus, Bigraph 등의 수많은 프로세스 대수가 존재한다. 하지만 시스템이 방대해지고 복잡해질수록 시스템을 구성하는 프로세스들의 통신과 이동 역시 방대해지고 복잡해지므로 프로세스 대수로 이를 이해하는데 어려움이 존재한다. 그러므로 방대하고 복잡한 시스템을 체계적으로 이해할 수 있는 방법이 필요하다. 본 논문에서는 방대하고 복잡한 시스템을 프로세스들의 통신과 이동의 순서화된 추상화 방법 즉, 계층적으로 구조화된 격자(Lattice)들의 형태인 프리즘(Prism)으로 다룬다. 이는 액티브 온톨로지(Active Ontology)에서 확장된 새로운 개념인 행위 온톨로지(Behavior Ontology)를 기반으로 한다. 프리즘은 시스템을 체계적으로 이해하기 위해 시스템을 계층적으로 구성된 행위적 속성을 지닌 격자들 관점에서 분석하는 것을 허용한다. 이러한 방법은 통신과 이동의 복잡함을 의미적이고 계층적으로 구성된 행위의 구조로 체계적으로 이해할 수 있게 한다.

• 한국광학회지
• /
• 제28권5호
• /
• pp.221-228
• /
• 2017

프리즘 분광계를 사용하여 액체 상태와 고체 상태의 혼합 폴리머(NOA61, NOA84) 굴절률을 측정하였다. 먼저 속이 빈 작은 프리즘을 제작하고 UV (ultra-violet) 에폭시를 채운 다음 프리즘의 꼭지각과 최소 편향각을 측정하여 굴절률을 측정하였다. 고체 상태의 폴리머는 속이 빈 프리즘에 추가 구조물을 넣고 UV 에폭시를 경화하여 고체 폴리머가 채워진 프리즘을 제작하고 굴절률을 측정하였다. 액체 상태나 고체 상태인 경우 모두, 두 종류의 에폭시를 섞어서 혼합 폴리머를 만들고 혼합비를 조절하면서 굴절률을 측정한 결과 혼합비에 비례하는 굴절률 측정값을 얻었다. 이러한 결과는 UV 에폭시를 사용한 원통형 이중 미세 렌즈배열의 초점거리를 조절할 수 있는 방법을 제공한다.