• Journal of Information Display
• /
• 제7권4호
• /
• pp.1-4
• /
• 2006

The optical performances of rounded prism films were investigated using a ray tracing technique. The angular distribution of the luminous intensity was obtained as functions of the prism pitch and the curvature of rounded apex and valley of prism arrays. The gain of the on-axis luminance decreased with decreasing curvature (increasing diameter) and pitch. The existence of the curved area on the prism film decreased the recycling efficiency of the prism film, i.e., the rays which would otherwise have been recycled through total internal reflections via the prism surfaces were refracted on the curved regions and redirected toward directions other than the on-axis direction. Quantitative correlation between the luminance gain and the curvature in addition to the prism pitch was obtained, which might serve as basic data for the optimization of prism films and the manufacturing processes.

• 대한기계학회논문집B
• /
• 제22권5호
• /
• pp.708-715
• /
• 1998

The shelter effect of a porous wind fence on a triangular prism was experimentally investigated in a circulating water channel. A porous fence of porosity .epsilon.=38.5% was installed in front of the prism model. The fence and prism model were embedded in a turbulent boundary layer. The instantaneous velocity fields around the fence and prism model were measured by using the instantaneous velocity fields around the fence and prism model were measured by using the 2-frame PTV(Particle Tracking Velocimetry) system. By installing the fence in front of the prism, the recirculation flow region decreases compared with that of no fence case. The porous fence also decreases the mean velocity, turbulent intensity and turbulent kinetic energy around the prism. Especially, at the top of the prism, the turbulent kinetic energy is about half of that without the fence.

• 대기
• /
• 제18권1호
• /
• pp.71-81
• /
• 2008

In this study, in order to estimate high resolution precipitation with monthly time scales, Parameter-elevation Regressions on Independent Slopes Model (PRISM) was modified and configured for Korean precipitation based on elevation, distance, topographic facet, and coastal proximity. Applying this statistical downscaling model to Korean precipitation for 5 years from 2001 to 2005, we have compiled monthly grid data with a horizontal resolution of 5-km and evaluated the model using bias, root mean square error (RMSE), and correlation coefficient between the observed and the estimated. Results show that bias, RMSE, and correlation coefficient of the estimated value have a range from 0.2% to 1.0%, 19.6% (June) to 43.9% (January), and 0.73 to 0.84, respectively, indicating that the modified Korean PRISM (K-PRISM) is reasonably worked by weighting factors, i.e., topographic effect and rain shadow effect.

• 디자인학연구
• /
• 제19권3호
• /
• pp.5-18
• /
• 2006

Digital information society shows a variety of contents of cross-categorial digital media in their inner or outer forms and concepts of the artistic aspects. In order to cope with such a complicated, unexpected trend in digital media and its industry, a new approach in the design process needs to be developed and adjusted with the new equipment of the creativity-thinking process of 'the Multi-Sensory Device (MSD),' 'the Multi-Dimensional Device (MDD),' and 'the Storytelling Device (SD)' in the Prism Effect-based Creativity-Thinking Process (PECTP). The PECTP is in principle designed to practically work with the four distinct techniques: 1) Physical Activity, 2) Linguistic Activity, 3) Visual Activity, and 4) Complex Activity. Consequently, this thesis notes that the nature of the cross-categorial design contents is necessarily non-directional since the creativity power inside the Prism Effect results in openness and diversity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2567-2572
• /
• 2007

The suppression of fluid force acting on a square prism near plane wall was studied by attaching fences on the corners of the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was Re=$2.0{\times}10^4$. The experimental parameters were the attaching position and numbers of fences, the space ratios G/B(G/B=0.1${\sim}$1.2) between prism and plane wall. The average drag coefficients were increased and the average lift coefficients were decreased and increased with the space ratios toward plane wall. The drag of the prism was reduced average 7.6% with the space ratios by attaching the normal fence at the rear and upper corner and the horizontal normal fence at the rear and lower corner on the prism. In this case, the separated flow at the front and upper corner was reattached on the upper side of the prism and the vortex streets between the prism and plane wall were appeared more slowly than that of prism without fences.

• Wind and Structures
• /
• 제17권3호
• /
• pp.245-262
• /
• 2013

The flow interaction between two identical neighboring twin square prisms in a staggered arrangement in an open terrain was investigated experimentally. The downwind prism was mounted on a rigid-aeroelastic setup in an open-terrain boundary layer flow to measure its acrosswind root-mean-square responses and aerodynamic damping ratios. By varying the relative location of the upwind prism and the Scruton number associated with the downwind prism, the acrosswind aeroelastic behavior of the downwind prism was analyzed and compared to that of an isolated one. Results showed that the acrosswind root-mean-square response of the downwind prism could be either suppressed or enhanced by the wake flow produced by the neighboring upwind prism. Besides the assessment of the wake effect of the downwind prism, finally, regressed relationships were presented to describe the variation of the aerodynamic damping ratio so as to predict its acrosswind fluctuating response numerically.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.94-100
• /
• 2012

본 연구는 벽면 근처에 놓인 정방형주의 모서리에 수직 분할판을 부착하여 유체력 제어 효과를 양항력 측정실험 및 PIV에 의한 가시화 실험으로 조사한 것이다. 분할판의 폭은 정방형주 폭의 10% 로 했다. 실험변수로서는 수직 분할판의 부착 위치 및 벽면과 사각주 사이의 간격으로 하였다. 정방형주 중심에서 후류방향으로 3.0B(B: 정방형주 한 변 길이) 떨어진 곳에서 와도의 변화가 가장 명확했다. 수직 분할판의 위치 및 유무와 관계없이 간격비 0.4~0.6에서 평균양력계수 및 Strouhal 수의 변곡점이 나타났다. 정방형주 윗면의 뒷 모서리에 수직 분할판을 설치한 경우 항력이 감소하였으며 각 간격비 평균 5.0%의 항력 저감 효과를 얻었다. 정방형주 윗면 박리영역의 크기는 앞쪽 모서리에 수직 분할판을 설치한 경우가 가장 컸고, 원형의 정방형주, 뒷쪽 모서리에 수직 분할판을 설치한 순서로 작았으며, 평균항력계수는 이 박리영역의 크기에 비례했다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.61-62
• /
• 2006

The suppression of fluid force acting on a square prism near plane wall was studied by attaching fences on the comers of the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was $Re=2.0{\times}10^4$. The experimental parameters were the attaching position and numbers of fences, the space ratios $G/B(G/B=0.1{\sim}1.2)$ between prism and plane wall. The average drag coefficients were increased and the average hit coefficients were decreased and increased with the space ratios foulard plane wall. The drag of the prism was reduced average 7.6% with the space ratios by attaching the normal fence at the rear and upper comer and the horizontal normal fence at the rear and lower corner on the prism.

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.11-14
• /
• 2017

본 논문은 프리즘 구조물의 집광효과를 이용하여 옥외용 사이니지 이산형 LED 패널의 광학적 불연속성을 개선할 수 있는 방법적 접근에 관한 것이다. 광투과성이 우수한 Polycarbonate에 MEMS(Microelectromechanical systems) 공정 및 극초단파(Femto-second) 레이저를 이용하여 프리즘 형태를 패터닝을 하였다. 패터닝된 polycarbonate는 light guide film의 역할을 하여 서로 다른 디스플레이 패널에서 발생하는 빛을 프리즘 구조에 의해 한 곳으로 모이게 함을 확인하였다. Polycarbonate와 디스플레이 패널의 간격에 따라 디스플레이 패널간의 거리를 조절할 수 있었으며 한 곳으로 모인 빛은 마치 두 디스플레이 패널이 연결된 것과 같은 효과를 나타내었다. 이는 아웃도어 사이니지용 디스플레이 패널에서 발생하는 문제점인 광학적 불연속성을 개선할 수 있을 것으로 보인다.

• 한국안광학회지
• /
• 제17권3호
• /
• pp.311-319
• /
• 2012

목적: 안경의 조제가공에 있어서 동공중심과 교정렌즈의 광학중심이 일치하지 않으면 안경이 프리즘을 발생시켜 사위가 유발되고 유발된 사위는 안정피로를 일으키는 요인으로 작용한다. 동공의 중심과 교정렌즈 광학중심의 불일치로 인해 발생하는 유발프리즘에 대해 알아보고자 하였다. 방법: 본 연구는 총 103명을 대상으로 착용 안경렌즈의 광학중심과 동공중심의 일치 여부를 수평방향과 수직방향으로 나누어 조사하였고, 그리고 그 결과들을 안경의 구조에 따라 4개의 그룹으로 분류하였다. 프리즘유발에 안경테의 효과를 보기 위해 프리즘의 총량을 비교하였고, 측정된 프리즘 값들은 독일의 RAL-RG 915 규약과 비교하였다. 결과: 수평방향의 경우 10.7%의 실험 대상자에서는 유발프리즘을 관찰할 수 없었고, 73.8%의 실험 대상자들은 유발프리즘에 의해 영향을 받았으나 그 범위는 허용 수준 내에 있었다. 하지만 15.5%의 실험 대상자들은 허용 범위를 초과하여 프리즘에 의해 영향을 받는 것으로 나타났다. 수직방향의 경우, 23.3%의 실험 대상자들은 안경의 초기 착용시 프리즘에 의한 영향이 없었고, 54.4%의 실험 대상자들은 허용 범위 내의 극히 적은 프리즘에 영향을 받았으며, 22.3%의 실험대상자들은 허용 범위를 초과하는 프리즘 영향을 받는 것으로 나타났다. 이러한 결과는 안경조정(fitting)이 가능한 요소가 적은 그룹 A와 B에서 그룹 C와 D에 비해 보다 많은 수평, 수직 방향의 유발프리즘이 발생한 것을 보여준다. 결론: 안경 착용자의 굴절이상도가 높을수록 안경테 전조정(pre-fitting)을 통하여 동공중심과 렌즈의 광학중심점을 일치시킴으로서 수평, 수직방향 유발프리즘을 최소화시켜 안정피로를 줄일 수 있을 것이다. 따라서 시지각력을 향상시키기 위해 단안PD와 단안Oh의 정확한 설계와 적절한 안경테 조정을 통해 정확한 안경의 조제가공이 필요하다고 사료된다.