• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3098-3108
• /
• 1996

This paper proposed two mechanisms of fixed method and new arrival method. They are all interactive meachanisms in that a SCP and the SSPs exchange load information for overload control. These mechanisms using simple algorithm based on the standard ACG, apply differenct call gapping time on each SSP under the fairness scheme when they allocates SCP capacity to competing demends. Also in the mechanisms, priority scheme is implemented. Two mechanisms show the almost same results on the call throughput. Fairness about the probability of rejection is maintained same value on all SSPs. On Priority scheme, new arrival method has better achievement than fixed method.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.196-204
• /
• 1996

This paper presents a new scheduling algorithm, which is the most improtant subtask in the high level synthesis. The proposed algorithm performs scheduling in consideration of resource sharing concept based on characteristics of conditionsla bransches in the intermediate data structure. CDFG (control data flow graph) generated by a VHDL analyzer. This algorithm constructs a conditon graph based on time frame of each operation using both the ASAP and the ALAP scheduling algorithm. The conditon priority is obtained from the condition graph constructed from each conditional brance. The determined condition priority implies the sequential order of transforming the CDFG with conditonal branches into the CDFG without conditional branches. To minimize resource cost, the CDFG with conditional branches are transformed into the CDFG without conditonal brancehs according to the condition priority. Considering the data dependency, the hardware constraints, and the data execution time constraints, each operation in the transformed CDFG is assigned ot control steps. Such assigning of unscheduled operations into contorl steps implies the performance of the scheduling in the consecutive movement of operations. The effectiveness of this algorithm is hsown by the experiment for the benchmark circuits.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.1
• /
• pp.64-71
• /
• 1999

본 논문에서는 공중 광역 ATM망 환경에서 비연결형 서비스 제공에 사용되는 CLS에 적용될 수 있는 홉 카운터를 이용한 우선 순위 제어 알고리즘(Priority Control Algorithm using Hop-Count : HC-PC)의 망 자원 손실 비용을 분석하였다. 분석을 통해 우선 순위가 없을 경우 (No Priority Controls Algorithm: NO-Pc) 의 평균 셀 손실률이 HC-PC 의 평균 셀 손실률의 가중 평균보다 크거나 같은 경우 항상 NO-PC 이 평균 망 자원 손실 비용이 HC-PC 의 평균 망 자원 손실 비용에 비해 크다는 사실을 보였다. 시뮬레이션 결과는 분석에 의해 찾아진 조건이 만족됨을 보여주며 HC-PC가 NO-PC에 비해 어떠한 환경에서든지 항상 낮은 평균 망 자원 손실 비용을 가짐을 보여 준다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.180-185
• /
• 2003

Performance test of servo control system that is used ultra-precision positioning system with single plane X-Y stage is performed by simulation with Matlab. Analyzed for previous control algorithm and adapted for modem control theory, dual servo algorithm is developed by minimum order observer, and stability priority on controller are secured. Through the simulation and experiments on ultra precision positioning, stability and priority on ultra-precision positioning system with single plane X-Y stage and control algorithm are secured by using Matlab with Simulink and ControlDesk made in dSPACE

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.5
• /
• pp.447-455
• /
• 2014

In this paper, we consider a representative integral imaging method in glasses-free 3D image processing and propose a prioritized transmission scheme for guaranteeing a received video quality in error-prone environments. According to the correlation of pixels consisting of each voxel of integral image, we set the priority differently and apply the modulation level according to this priority value. That is to say, the corresponding pixels with small variance are set to a high priority and transmitted by using a low level modulation that is robust under transmission errors, but the corresponding pixels with greater variance are set to a lower priority and transmitted by using a high level modulation that has a high bit error rate but fast transmission rate. Result shows that the proposed scheme that applies the error-robust modulation level to the important image bit stream with the high priority improves the peak to sidelobe ratio (PSR) of the received 3D image, compared with a typical method that use the same modulation level without distinction of priorities.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.313-324
• /
• 2005

The success of the IEEE 802.11 standard has prompted research into efficiency of the different medium access methods and their support for different traffic types. A modified version of the point coordination function (PCF) called modified PCF has been introduced as a way to improve the efficiency over the standard method. It has been shown through a simulation study and a mathematical analysis that channel utilization can be much improved compared to the standard, in case there is no so-called hidden station problem. However, under the hidden station problem, the efficiency of the modified PCF would obviously decrease. In this paper, some enhancements of the modified PCF are introduced. Firstly, we propose a retransmission process to allow frames involved in collisions to be retransmitted. Then, we propose a collision resolution mechanism to reduce the frame collision probability due to the hidden station problem. In addition, we propose a priority scheme to support prioritization for different traffic types such as interactive voice and video, and real-time data traffic in the modified PCF. To prevent the starvation of one low priority traffic, minimum transmission period is also guaranteed to each traffic type via an admission control algorithm. We study the performance of the modified PCF under the hidden station problem and the performance of the modified PCF with priority scheme through simulations. To illustrate the efficiency of the priority scheme, we therefore compare its simulation results with those of some standardized protocols: The distributed coordination function (DCF), the enhanced distributed channel access (EDCA), the PCF, and our previously proposed protocol: The modified PCF without priority scheme. The simulation results show that the increment of delay in the network due to the hidden station problem can be reduced using the proposed collision resolution mechanism. In addition, in a given scenario the modified PCF with priority scheme can provide better quality of service (QoS) support to different traffic types and also support a higher number of data stations than the previous proposals.

• Smart Media Journal
• /
• v.4 no.1
• /
• pp.25-32
• /
• 2015

Powering wireless sensors with energy harvested from the environment is coming of age due to the increasing power densities of both storage and harvesting devices and the electronics performing energy efficient energy conversion. In order to maximize the functionality of the wireless sensor network, minimize missing packets, minimize latency and prevent the waste of energy, problems like congestion and inefficient energy usage must be addressed. Many sleep-awake protocols and efficient message priority techniques have been developed to properly manage the energy of the nodes and to minimize congestion. For a WSN that is operating in a strictly energy constrained environment, an energy-efficient transmission strategy is necessary. In this paper, we present a novel transmission priority decision scheme for a heterogeneous body sensor network composed of normal nodes and an energy harvesting node that acts as a cluster head. The energy harvesting node's decision whether or not to clear a normal node for sending is based on a set of metrics which includes the energy harvesting node's remaining energy, the total harvested energy, the type of message in a normal node's queue and finally, the implementation context of the wireless sensor network.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.85-94
• /
• 2005

In this thesis, we propose a Speed Accommodation Priority Algorithm Scheme(SPAS) and Traffic Control Model Scheme (TCMS) to satisfy a desired handoff dropping probability and to reduce the blocking probability of new calls using mobility characteristics and handoff rate in mobile communication networks. The guard channels below threshold can guarantee the Quality of Service(QoS) in terms of the request handoff dropping probability and the guard channels above the threshold can be used to handle high priority new calls and high priority handoff calls. When the ratio of the handoff call arrival rate is less then the ratio of the new call arrival rate, the proposed method can guarantee the new call better than the previous guard channel scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.107-115
• /
• 1998

A path planning using potential field method is very useful for the real-time navigation of mobile robots. However, the method needs high modeling cost to calculate the potential field because of complex preprocessing, and mobile robots may get stuck into local minima. In this paper, An efficient path planning algorithm for multiple mobile robots, based on the potential field method, was proposed. In the algorithm. the concepts of subgoals and obstacle priority were introduced. The subgoals can be used to escape local minima, or to design and change the paths of mobile robots in the work space. In obstacle priority, all the objects (obstacles and mobile robots) in the work space have their own priorities, and the object having lower priority should avoid the objects having higher priority than it has. In this paper, first, potential based path planning method was introduced, next an efficient collision-avoidance algorithm for multiple mobile robots, moving in the obstacle environment, was proposed by using subgoals and obstacle priority. Finally, the developed algorithm was demonstrated graphically to show the usefulness of the algorithm.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.361-366
• /
• 2004

Geographic Information has been used widely for landuse and management, city plan, and environment and disaster management, etc., But geographic information has been built for individual cases using various methods. Therefore, the discordancy in data, double investment, confusion of use and difficulty of decision supporting system have been occurred. In order to solve these problems, national government is need to framework database. This framework database was enacted for building and use of National Geographic Information System and focused on basic plan of the second national geographic information system. Also, the framework database was selected of eight fields by NGIS laws and 19 detailed items through meeting of framework committee since 2002. In this research, The 19 detailed items( road, railroad, coastline, surveying control point etc.,) of framework database consider a Priority order, In the result of this research, the framework database is obtain to a priority order for building and the national government will carry effectively out a budget for the framework database building. Each of 19 detailed items is grouping into using the priority order of the framework database by AHP analysis method and verified items by decision tree analysis method. The one of the highest priority order items is a road, which is important for building, continuous renovation, and maintain management for use.