• 한국인쇄학회지
• /
• 제31권1호
• /
• pp.1-14
• /
• 2013

Screen printing is a printing method with flexible plate surface characteristics. In addition, since the appearance of electronics industry the screen printing has been demanding high quality and definition. However, Screen printing is a method for taking ink through mesh opening because screen mesh tends to restrict quality of screen printing. In particular, the biggest problem compared with other printing type is halftone reproduction characteristics. Halftone reproduction characteristics for screen printing depend on screen mesh and opening. Dot losses or dot gains are observed through various types of screen mesh because thread of screen mesh interfere with the movement of the ink. Excessive dot losses or gains can affect the tonal range. Furthermore, this problem can result in other problem such as bad contrast and gray balance. Therefore, it is an important factor to use proper screen mesh for halftone screen printing. However, domestic screen printing industry relies on worker's experience in field rather than depending on objective data although standardized specifications and optimal printing conditions are required for screen printing. For this reason, it is important to stipulate standard condition for domestic screen printing industry. Therefore, it was examined to find tonal range by mesh opening in halftone prints process of screen printing used domestic paper and ink in this study. In addition, TVI(Tone Value Increase) characteristic was observed by comparing to the manuscripts and prints of the dot area ratio. Furthermore, contrast value and gray balance were confirmed for each condition of the printout. Conditions for the proper selection of screen mesh screen for the quality of the prints were also examined, compared with the international standard of screen printing, ISO 12647-5.

• Journal of Electrical Engineering and Technology
• /
• 제7권1호
• /
• pp.91-96
• /
• 2012

We introduce an understanding of silver (Ag) inkjet overlap-printing characteristics from the viewpoints of cohesion between ink droplets and adhesion between an ink droplet and a surface. The printing characteristics were closely monitored by changing the surface energy to elucidate the effect of adhesion and cohesion on printing instability, such as droplet merging and line bulging. The surface energy of the substrate was changed through the hydrophilization of a hydrophobic fluorocarbon-coated surface. The surface energy and ink wettability of the prepared surfaces were characterized using sessile drop contact angle analysis, and printing instability was observed using an optical microscope after drop-on-demand inkjet printing with a 50% overlap in diameter of deposited singlet patterns. We found that the surface energy is not an appropriate indicator based on the experimental results of Ag ink printing on a hydrofluoric-treated silicon surface. The analytical approach using adhesion and cohesion was helpful in understanding the instability of the inkjet overlap-printing, as adhesion and cohesion represent the direct interfacial relationship between the Ag inks used and the substrate.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2007년도 추계 학술논문 발표회
• /
• pp.59-64
• /
• 2007

We have manufactured low-curable silver pastes for gravure printing out of roll to roll printing process. When printing, the pastes be used different silver powder shape because of the printing characteristics. The pastes were prepared with silver powder by silver powder shape, polyester resin, solvent and homogenized on a standard three-roller mill. And the pastes exhibited a shear-thinning flow at viscosity profile. Moreover the adhesive strength and resistivity of silver film had good characteristics. With the manufactured paste in this study, RFID antenna circuit had flexible is manufactured and it had $10^{-4}{\sim}10^{-5}{\Omega}{\cdot}cm$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1747-1751
• /
• 2008

Electrohydrodynamic jet printing (EHDP) technique is widely used for the direct writing. However, in the existing EHDP method, the printing characteristics are affected by the printing substrate used, and the line width of the printed is determined by the geometry of the nozzle. We propose an EHDP method which is capable of (1) removing the effect from the substrate, and (2) controlling the line width through the ON/OFF control of the each nozzle in the nozzle array. Printing characteristics of our EHDP system were examined and successful ON/OFF control of the nozzle array were demonstrated. By using the proposed EHDP, it is expected that stable meniscus regardless of the substrate and different line widths even using the same nozzle can be achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.155-158
• /
• 2007

Printed organic thin-film transistor(OTFT) to use as a switching device for an organic light emitting diode(OLED) were fabricated in the microcontact printing and direct printing processes at room temperature. The gate electrodes($5{\mu}m$, $10{\mu}m$, and $20{\mu}m$) of OTFT was fabricated using microcontact printing process, and source/drain electrodes ($W/L=500{\mu}m/5{\mu}m$, $500{\mu}m/10{\mu}m$, and $500{\mu}m/20{\mu}m$) was fabricated using direct printing process with hard poly(dimethylsiloxane)(h-PDMS) stamp. Printed OTFT with dielectric layer was formed using special coating system and organic semiconductor layer was ink-jet printing process. Microcontact printing and direct printing processes using h-PDMS stamp made it possible to fabricate printed OTFT with channel lengths down to $5{\mu}m$, and reduced the process by 20 steps compared with photolithography. As results of measuring he transfer characteristics and output characteristics of OTFT fabricated with the printing process, the field effect characteristic was verified.

• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.23-34
• /
• 2006

Color reproduction is one of the most important expression factors in digital printing. In this paper, an experiment was done where the characteristics of color reproduction in digital printing. The results could summarized as follows. The printing used device profile showed a color difference of less than printing used default value in digital printing. As a result of weighting color difference, a difference between color gamut of digital original and color gamut of printing, when transforming the RGB color space to CMY color space, a exclusion the gray revision. The solution is to optimize the color transformation by gamut mapping and gray revision.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 춘계 학술발표회 논문집
• /
• pp.45-55
• /
• 2000

Recently, as the prepress mainstream is changed to the digital wolkflow, various digital proofing systems such as high price dye sublimation printers and low price ink jet printers are widely used in printing industry. Generally, CRT monitors are also often used as a soft proofing device for hard-copy image output. However, displayed color image on CRT monitor does not match to the actual color printing sheets. Because, the color space of CRT monitor used RGB color space, and it is differ with printing device color space, CMY. Therefore, proper color compensations are needed to match the colors between hard-copy proofs on the printing device and soft copy proofs on the monitor. For the proper compensation, we used LUT and gamut mapping method for color space transformation between device dependent color space and device independent color space, vis a vis. This paper shows the application method and the usefulness of CRT monitor for the soft-copy proofing using the output characteristics of printing device.

• 복식
• /
• 제63권2호
• /
• pp.45-54
• /
• 2013

With the development of digital technology, clothes of unique textiles using the digital printing techniques have appeared as a creative trend in textile design. The development of digital textile printing technology has allowed the fashion industry to utilize it as an expressive method of a surrealist trend in current fashion designs, and so it is necessary to understand and study this phenomenon. The present study is an attempt to understand this modern fashion phenomena from an artistic perspective by looking at textile designs that applied actual images to textiles, so that this trend in fashion design can be better understood. In this context, this study aims to examine characteristics and expressive techniques of d$\acute{e}$paysement, automatisme associated with digital textile printing by using actual images among surrealist expressions, and to investigate creative expressions of textile design freely expressing the visual boundary between reality and surrealism with the development of digital technology. For research methods, we reviewed technical texts and previous studies related to our research topic for theoretical exploration and investigated the Internet data and used them for basic data. In the case study, we came up with the characteristics and meanings by classifying fashion design cases using digital textile printing techniques according to expressive techniques of surrealist d$\acute{e}$paysement, automatisme. Details of this study are as follows: First, it investigates the definition and expressive characteristics of d$\acute{e}$paysement, automatisme of the surrealist expression for its theoretical understanding. Second, it comes up with the characteristics by analyzing the digital textile cases from the perspective of d$\acute{e}$paysement, automatisme. Third, it deduces the expressive methods and characteristics of digital textile printing from a the perspective of surrealist d$\acute{e}$paysement, automatisme based on the resulting characteristics. The conclusions show that d$\acute{e}$paysement, automatisme, which consists of improvisation and coincidence, maximized the mysterious images of derealisation and mysterious primitive images. These things emphasized the characteristics of maximization of images, derealisation, and rationalization of irrationalism.

• 복식문화연구
• /
• 제23권2호
• /
• pp.294-309
• /
• 2015

This study aims to clarify the aesthetic values between emotion of human and expression of technology in contemporary fashion as it analyzes formative characteristics of related cases in fashion based on principles of 3D Printing technology and the viewpoint of mechanic aesthetics. The conclusions of this study are as follows. First, 3D Printing fashion is not only expressed diverse variations by its principles of formative methods, materials and properties, but also changes of silhouette by applying system of designers. Second, general characteristics of 3D Printing fashion is represented by various applications in SLS system, and it can be specifically explained application to a portion of clothing, decorative roles of clothing, complicated pattern making through crossing fabrics using 3D scanner and displaying a certain object changing fashion styles, and so forth. Third, the formative characteristics of 3D Printing fashion from the perspective of mechanic aesthetics is as follows. It can be analyzed as the integration of metaphysical values through compared symbolization of natural feature and technical evolution, partial dynamics and interactive velocity-based, formative combinations for abstract expression using architectural components, cosmos images and substantialized structures through images of organic space interacted human shapes. As the mention above, 3D Printing technology can creative a diverse area of fashion, and express images of new technological fashion through various works with continuous development of techniques.

• 한국인쇄학회지
• /
• 제29권2호
• /
• pp.45-58
• /
• 2011

Gravure off-set printing recently is used in electronics display market. This method has advantages of mass production and high printing speed. It is also fine pattern can be implemented. We have manufactured low-curable conductive Ag pastes for gravure off-set printing. When printing, the pastes be used different silver powder shape because of the printing characteristics. The pastes were prepared with silver powder by silver powder shape and size, epoxy resin, solvent and homogenized on a standard three-roll mill. And the pastes exhibited a shear-thinning flow at viscosity profile. Moreover the adhesive strength and resistivity of silver film had a good characteristics. With the manufactured paste in this study, touch panel had is manufactured and it had $4{\times}10-5{\Omega}.cm$.