• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1519-1521
• /
• 2007

In this work, a coplanar-type plasma flat fluorescent lamp having cross type of electrode was fabricated by screen printing and sealing technique. Cross type of electrode with a dielectric layer were screen-printed on a rear glass plate, and then fired at $550^{\circ}C$. Phosphor was printed on and fired at $450^{\circ}C$. Finally, the lamp was sealed by frit glass at $450^{\circ}C$. The lamp of cross electrode type was studied depending on the electrode gap and the thickness of dielectric layer.

• 한국표면공학회지
• /
• 제45권3호
• /
• pp.136-141
• /
• 2012

'Jikjisimcheyocheal (Jikji afterwards)' is known as a first book printed by the metal type in the world. The metal type used for printing this book has not been found yet. To help for replicating the original metal type, it is required to investigate the composition analysis of the copied metal type. In this study, the composition analysis and thermodynamic care for replicating of ancient metal type was performed on the basis of an analytical reports concerned with the ancient metal type which made after Jikji printing. Metal types were made by remelting and casting of the mother alloy which came from a cast of a mixed metals in accordance with the composition revealed in the literatures. Change of composition during remelting of mother alloy and casting of metal was detected by the EDS analysis. The reasons for variation in composition were discussed by metallurgical and thermodynamic point of view, and a mixing ratio of metals to get the original composition of ancient metal type is suggested. Some attention should be paid on mixing, melting and casting of metals to get an objected composition for copy of ancient metal type.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.110-114
• /
• 2003

In this paper, a new self-oscillated type high voltage charger controller circuit is proposed, which has variable constant current source characteristics to improve charge characteristic of charger roller. The proposed control method enables high quality printing characteristics regardless of the circumstance change such as ambient temperature or humidity by changing the current reference signal. To verify the proposed control method various experiments are performed.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.11-20
• /
• 2003

In Flexo printing machine, it's operated with combination of blanket cylinder and cylinder. The blanket cylinder has some number of grooves to attach the blanket on surface. In case of operating the printing machine, it has generate mechanical noise when the two cylinders encounter with the grooves. So, in this study, we developed a mechanical noise control algorithm of printing in servo control system. Then we have reduced the mechanical noise with control of servo actuator.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.31-42
• /
• 2003

The optimum color proofing system with the similar colorants to the printing system has to be used in high quality offset color printing. And so, the evaluation on color reproduction properties of the colorants for proofer and press are very important. In this paper, the optimum color proofing method is recommended by means of colorimeric comparative evaluation on the color reproduction properties such as color gamut, color difference, hue error of the colorants for the proofing system of CRT monitor, inkjet printer, dye sublimation type digital proofer, and the actual printing system of offset press.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.731-736
• /
• 2014

An organic junction transistor with a vertical structure based on an active layer of poly(3-hexylthiophene) was fabricated by facile micro-contact printing combined with the Langmuir-Schaefer technique, without conventional e-beam or photo-lithography. Direct printing and subsequent annealing of Au-nanoparticles provided control over the thickness of the Au electrode and hence control of the electrical contact between the Au electrode and the active layer, ohmic or Schottky. The junction showed similar current-voltage characteristics to an NPN-type transistor. Current through the emitter was simply controllable by the base voltage and a high transconductance of ~0.2 mS was obtained. This novel fabrication method can be applied to amplifying or fast switching organic devices.

• 연구논문집
• /
• 통권33호
• /
• pp.81-88
• /
• 2003

A metal jet printing system based on ink jet printing technique is one of the effective equipments for manufacturing elements of display devices, electrical devices, information processing systems, and so on. In order to develop an actuator of the metal jet printing system, bimorph type PZT actuator(length 25.2mm, width 7.2mm, thickness 0.5mm, shim thickness 0.2mm) and its controller(voltage range $\pm24v$, built-in fast recovery diode) were suggested and investigated. Performance tests and characteristic analysis, such as displacement, force, hysteresis and frequency, were carried out. The results show that the suggested actuator and controller are suitable for the metal jet printing system.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권1호
• /
• pp.176-181
• /
• 2024

The desktop-level 3D printing machines makes it easier for independent designers to produce collectible models. Desktop 3D printers that use FDM (Fused Deposition Modeling) technology usually use a minimum nozzle diameter of 0.4mm. When using FDM printers to make Gunpla models, Thin slice structures are prone to slicing errors, which lead to deformation of printed objects and reduction in structural strength. This paper aims to analyze the printing model that produces errors, control a single variable among the three variables of slice layer height, slice wall thickness and filament type for comparative testing, and find a way to avoid gaps. To provide assistance for using FDM printers to build models containing thin-walled structures.

• 한국인터넷방송통신학회논문지
• /
• 제22권3호
• /
• pp.105-110
• /
• 2022

4차 산업혁명이라는 흐름에 따라 서로 다른 분야의 결합을 통해 새로운 분야가 생기는 융복합의 시기를 맞아 예술 분야 중 크래프트 영역의 확장성에 관해 연구하고자 하였다. 연구 내용은 디지털 크래프트의 정의와 가치에 대한 이론적 배경을 토대로 3D 프린팅 기술을 활용한 크래프트 사례를 분석한 것이다. 연구 결과, 3D 프린팅 기술을 활용한 크래프트 작품은 융합적 표현 방식에 따라 크게 네 가지의 형태로 나누어 볼 수 있었다. 첫 번째로 혼합형은 전통 크래프트 형식에서 크게 벗어나지 않으면서도 조화롭게 제작된 것이 가장 큰 특징이었다. 두 번째로 부품형은 일정한 형태와 세밀한 작업이 장점인 디지털 기술의 특징이 가장 잘 나타난 형태로 제작되었다. 세 번째로 구조형은 3D 프린터로 출력한 결과물을 베이스로 하여 전통 크래프트 기법이 덧입혀져 아날로그 감성이 묻어나는 작품이 되었다. 네 번째로 연결형은 본 연구의 분석 사례 중에서 독창성과 고유성이 가장 크게 엿보인 작품이었다. 디지털 기술이 널리 활용되고 있는 만큼, 효과적인 작업 방향성에 관하여 지속적인 연구가 필요하다고 판단된다.

• 복식문화연구
• /
• 제24권3호
• /
• pp.315-323
• /
• 2016

The present study is intended to study sole types necessary for shoe designs for elementary school students that are in age groups in growth periods, and 3D midsole design utilizing 3D printing technology. This study analyzed data from the 3D measurement of the feet of 1,227 elementary school students aged 7-13 years residing in the capital region conducted as part of the 6th Anthropometry of Size Korea. In addition, 3D midsoles by sole type were designed utilizing a Rhino CAD, and midsole prototypes were output utilizing a Zortrax-M200 3D Printer. Through a cluster analysis of sole shapes by type, sole shapes were classified into three types. Type 1 has small values of foot lengths and foot breadths, with large toe 1 angles and high arch heights. Type 2 has intermediate values of foot lengths and foot breadths, with small toe 1 angles and high arch heights. Type 3 has large values of foot lengths and foot breadths with small toe 1 angles and low arch heights. On reviewing the results of design of 3D midsoles by sole type, it can be seen that the midsoles were designed according to characteristics by sole type. The results of the sole type analysis in the present study are expected to be meaningful as basic data for the development of shoe insoles for elementary school students.