• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.2
• /
• pp.45-59
• /
• 1998

Halftonig is a technique to create the appearance of intermideate tone levels by controlling the spatial distribution of the binary pixel values. Recently, many printing devices such as image setter, inkjet printer, laser printer and facsimile, generate image, they require the technique. Ordered dither is achieved comparing the gray scale image to periodic array. This method is fast, but it occurs periodic patterns. Conentional error diffusion generates a good image. But processing speed is very slow and appeares worm artifacts in middle tone scale. To improve it, Bns(Blue noise Screen) is developed based on Gaussian distribution. In this paper, we discribe methods to design BNS based human visual characteristics and to improve blue appearing at edge area of image by USM(using unsharp mask).

• Journal of computational fluids engineering
• /
• v.13 no.3
• /
• pp.8-13
• /
• 2008

We present a numerical simulation technique and some preliminary results of the impact and spreading of a droplet containing particles on the solid substrate in 2D. We used the 2nd-order Adams-Bashforth / Crank-Nicholson method to solve the Navier-Stokes equation and employed the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension. The impact velocity has been generated by the instantaneous gravity. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles and the discontinuous Galerkin method has been used for the stabilization of the interface advection equation. We investigated the droplet spreading by the inertial force and discussed effects of the presence of particles on the spreading behavior using an example problem. We observed reduced oscillation and spread for the particulate droplet.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.40.1-40.1
• /
• 2011

Single-walled carbon nanotubes are one among the most promising carbonaceous materials to be used as the electrodes in the devices like micro batteries, supercapacitors, etc. In this study, single-walled carbon nanotube thin films have been fabricated through electrospray deposition technique which is one of the attractive direct printing methods in the field of printed electronics. Single-walled carbon nanotube ink (water dispersed, 3wt %) has been used to fabricate thin films through electrospray deposition technique. The as-deposited SWCNT thin films have been characterized using the appropriate characterization techniques and the results are presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1189-1192
• /
• 2006

We have demonstrated the novel technique for spacing two flexible substrates in stable by using rigid pillar spacer array and micro-contact printing assembling technique. Specially designed columnar structure generates self-collected adhesive polymer feature results in a good adhesion and a high mechanical stability to the external bending deformations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.5
• /
• pp.757-763
• /
• 1999

The burn-out technique is used to result in the velvet cloth being patterned in open and solid areas by carbonize the cellulose fiber. It is examined how to burn out the cellulose part of the velvet without damage of the other part. The print paste indalca solution is mixed with sodium hydrogensulfate and lycerine and then screen-printed on the back side of the velvet. The effects of process conditions such as concentration of sodium hydrogensulfate dry heat fixation temperature and time pull no. and glycerine contents on the properties of ground farics were investigated. The yellowness index and the breaking load of silk ground fabrics afected by the process conditions especially concentration of sodium hydrogensulfate dry heat fixation temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.20-25
• /
• 2020

As nanoscience and nanotechnology advance, techniques for selective pattern growth have attracted significant attention. Silica nanoparticles (NPs) are used as a promising nanomaterials for bio-labeling, bio-imaging, and bio-sensing. In this study, silica NPs were synthesized by a sol-gel process using a modified Stöber method. In addition, the selective pattern growth of silica NPs was achieved by the surface functionalization of the substrate using a micro-contact printing technique of a hydrophobic treatment. The particle size of the as-synthesized silica NPs and morphology of selective pattern growth of silica NPs were characterized by FE-SEM. The contact angle by surface functionalization of the substrate was investigated using a contact angle analyzer. As a result, silica NPs were not observed on the hydrophobic surface of the OTS solution treatment, which was coated by spin coating. In contrast, the silica NPs were well coated on the hydrophilic surface after the KOH solution treatment. FE-SEM confirmed the selective pattern growth of silica NPs on a hydrophilic surface, which was functionalized using the micro-contact printing technique. If the characteristics of the selective pattern growth of silica NPs can be applied to dye-doped silica NPs, they will find applications in the bio imaging, and bio sensing fields.

• Journal of Technologic Dentistry
• /
• v.41 no.2
• /
• pp.81-86
• /
• 2019

Purpose: The purpose of the present study was to compare the internal fit of two different temporary restorations fabricated by dental CAD/CAM system and to evaluate clinical effectiveness. Methods: Composite resin tooth of the maxillary first molar was prepared as occlusal reduction(2.0mm), axial reduction(1mm offset), vertical angle(6 degree) and chamfer margin for a temporary crown and duplicated epoxy die was fabricated. The epoxy dies were used to fabricate provisional restorations by CAD/CAM milling technique or 3D-printing technique. The inner data from all crowns were superimposed on the master die file in the 'best-fit alignment' method using 3D analysis software. Statistical analysis was performed using a Wilcoxon's rank sum test for differences between groups. Results: It showed that the internal RMS(Root Mean Square) values of the additive group were significantly larger than those of other group. No significant differences in internal discrepancies were observed in the temporary crowns among the 2 groups with different manufacturing method. Conclusion: All the groups had the internal fit within the clinical acceptable range (< $50{\mu}m$). The continuous research in the future to be applied clinically for the adaptation of additive manufacturing technique are needed.

• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.100-105
• /
• 2017

The purpose of the present study was to develop and evaluate patient-customized helmets with a three-dimensional (3D) printer for radiation therapy of malignant scalp tumors. Computed tomography was performed in a case an Alderson RANDO phantom without bolus (Non_Bolus), in a case with a dental wax bolus on the scalp (Wax_Bolus), and in a case with a patient-customized helmet fabricated using a 3D printer (3D Printing_Bolus); treatment plans for each of the 3 cases were compared. When wax bolus was used to fabricate a bolus, a drier was used to apply heat to the bolus to make the helmet. $3-matic^{(R)}$ (Materialise) was used for modeling and polyamide 12 (PA-12) was used as a material, 3D Printing bolus was fabricated using a HP JET Fusion 3D 4200. The average Hounsfield Unit (HU) for the Wax_Bolus was -100, and that of the 3D Printing_Bolus was -10. The average radiation doses to the normal brain with the Non_Bolus, Wax_Bolus, and 3D Printing_Bolus methods were 36.3%, 40.2%, and 36.9%, and the minimum radiation dose were 0.9%, 1.6%, 1.4%, respectively. The organs at risk dose were not significantly difference. However, the 95% radiation doses into the planning target volume (PTV) were 61.85%, 94.53%, and 97.82%, and the minimum doses were 0%, 77.1%, and 82.8%, respectively. The technique used to fabricate patient-customized helmets with a 3D printer for radiation therapy of malignant scalp tumors is highly useful, and is expected to accurately deliver doses by reducing the air gap between the patient and bolus.

• Composites Research
• /
• v.34 no.4
• /
• pp.241-248
• /
• 2021

As the electric vehicle market grows, there is an issue of light weight vehicles to increase battery efficiency. Therefore, it is going to replace the battery module cover that protects the battery module of electric vehicles with high strength/high heat-resistant polymer composite material which has lighter weight from existing aluminum materials. It also aims to respond to the early electric vehicle market where technology changes quickly by combining 3D printing technology that is advantageous for small production of multiple varieties without restrictions on complex shapes. Based on the composite material mechanics, the critical length of glass fibers in short glass fiber (GF)/polycarbonate (PC) composite materials manufactured through extruder was derived as 453.87 ㎛, and the side feeding method was adopted to improve the residual fiber length from 365.87 ㎛ and to increase a dispersibility. Thus, the optimal properties of tensile strength 135 MPa and Young's modulus 7.8 MPa were implemented as GF/PC composite materials containing 30 wt% of GF. In addition, the filament extrusion conditions (temperature, extrusion speed) were optimized to meet the commercial filament specification of 1.75 mm thickness and 0.05 mm standard deviation. Through manufactured filaments, 3D printing process conditions (temperature, printing speed) were optimized by multi-optimization that minimize porosity, maximize tensile strength, and printing speed to increase the productivity. Through this procedure, tensile strength and elastic modulus were improved 11%, 56% respectively. Also, by post-processing, tensile strength and Young's modulus were improved 5%, 18% respectively. Lastly, using the FEA (finite element analysis) technique, the structure of the battery module cover was optimized to meet the mechanical shock test criteria of the electric vehicle battery module cover (ISO-12405), and it is satisfied the battery cover mechanical shock test while achieving 37% lighter weight compared to aluminum battery module cover. Based on this research, it is expected that 3D printing technology of polymer composite materials can be used in various fields in the future.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1883-1896
• /
• 2009

This paper explores the use of Korean wrapping cloths (bojagi) in the late Joseon period and the types of decorations applied to them. Korean wrapping cloths called bojagi are pieces of cloths used by households of all social classes for practical purposes such as wrapping presents and covering food. In addition to the basic purposes, the making of bojagi was also an activity to express the down-to-earth wishes and the satisfaction of creation by the designer. With regard to the decorative feature of Korean wrapping cloths, five types of, patchwork, embroidered, painted, printed, and oiled-paper wrapping cloths, were examined. The patchwork wrapping cloths (jogakbo) show the frugality of Joseon women in addition to the well-developed composition skill of lines and colors. The embroidered wrapping cloths were prepared for special rituals and ceremonies such as weddings. Painted wrapping cloths were decorated with a Chinese-colors technique (called dangchae) or sometimes with black ink painting. For printed wrapping cloths, various sizes of woodblock printings and roller printings were used. Although monotone black ink was the main color applied to the printing, there was also wrapping cloths made from chintz having brilliant fast colors. Oiled-paper wrapping cloths called sikjibo were in use only for covering food. Cut-out work was employed to decorate it.