• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.29-37
• /
• 2015

The wavefront printer records a volume-reflection hologram as a two-dimensional array of elemental holograms from computer-generated holograms (CGHs) displayed on a spatial light modulator (SLM). The wavefront coming from the object is extracted by filtering in the spatial-frequency domain. This paper presents a method to improve color reproduction in a wavefront printer with spatial division of exposures at primary colors, by adaptive partitioning of the SLM in accordance with the color content encoded in the input CGHs, and by the controllable change of exposure times for the recording of primary colors. The method is verified with a color wavefront printer with demagnification of the object beam. The quality of reconstruction achieved by the proposed method proves its efficiency in eliminating the stripe artifacts that are superimposed on reconstructed images in conventional mosaic recording.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.259-262
• /
• 2000

One of the major factors determining the printing quality of a color printer is the color matching that is performed inside the printer driver In this paper, the mini driver for the color printer is built using the Microsoft 98DDK. Also, the ICC profile proposed as the standard for the color management system is generated. The color matching capability of the mini driver with the ICC profile is examined and compared with that of the commercial printer driver.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.466-468
• /
• 2005

Recently, the demand for the development of high quality and high speed laser printer and efficient power utilizations are required. Among complicate electro-mechanic devices in laser printer, the toner fusing unit consumes above 90[%] of all electrical energy needed for printing devices. Therefore, the development of more effective energy-saving toner fusing process becomes a significant task of much great demand. Generally, there are several way to implement fusing unit, among them this paper present a new hybrid induction heating method. The proposed induction heating method enables to increase coupling coefficient between heating coil and heat roller also to Increase total energy transfer efficiency. Therefore the proposed IH inverter system provide very fast W.U.T.(Warm UP Time), also high efficiency. Through experimental result, the proposed control system is verified.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.135-136
• /
• 2017

In this paper, a spiral inductor is designed and its inductance is calculated by the expended Grover method. To verify this, a rectangular planar inductor is printed by inkjet printer using conductive ink and the calculated inductance value is compared with its measured value.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.254-258
• /
• 2016

In this paper, a brain phantom for evaluating brain stroke localization is proposed. To evaluate brain stroke localization, a phantom imitating three-dimensional (3D) simulation environment is needed. Mold for the proposed phantom was printed by a 3D printer and the interior of the phantom consists of 5 different brain tissue materials. Each of the brain tissue materials has the conductivity and permittivity similar to those of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) standards for a frequency band from 0.5 to 2 GHz.

• 전자진흥
• /
• 제5권8호
• /
• pp.41-45
• /
• 1985

• ETRI Journal
• /
• 제9권1호
• /
• pp.165-172
• /
• 1987

본고에서는 컴퓨터의 출력장치로서 최근 가장 인기를 얻고 있는 논-임팩트 레이저 페이지 프린터(non-mpact laser page printer), 즉 레이저 빔 프린터(LBP : Laser Beam Printer)의 성능 및 특성에 관한 고찰과 현재 시판중인 desktop 레이저 빔 프린터를 비교 분석하고 그 응용사례에 대해서 간단히 소개하고자 한다.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1619-1625
• /
• 2016

Recently, as the public interests about the 3D printing technology are increased, various kinds of 3D printers are being released. But, they are limited to use because they cannot fabricate an object which is larger than the printer's printing volume. To relieve this problem, we propose an interactive 3D mesh editing system for 3D printing the object that is larger than the printing volume. The proposed 3D editing system divides the input 3D mesh using the user's line drawings defining cutting planes and it attaches various connectors. The output meshes are guaranteed to fabricate without post-processing. The printed parts can be assembled using the connectors. Our proposed system has an advantage that it can be used easily by non-professional 3D printer users.

• 전자공학회논문지S
• /
• 제34S권5호
• /
• pp.73-85
• /
• 1997

In a drop-on-demand thermal ink-jet printer, the dot size of an ink droplet expelled from a printer depends on the absorption of the paper. This causes severe differences between output images on the different paper materials. In this paper, the color matching algorithm for different papers is proposed. To achieve corresponding color reproduction, dot gain compensatio nbased on saturation was applied to predict color reproduction on a printer. If the dot gain of pigment increases, the white portion of paper decreases while the saturation value increases monotonically. As the results of dot gain compensation, intensity change may appear. Therefore, an intensity compensation without any hue variation is followed to match the colors of different subtrates.

• 전자공학회지
• /
• 제18권11호
• /
• pp.1-10
• /
• 1991