• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1194-1202
• /
• 2002

A study on the topology optimization of a multi-spectral camera for space-use is presented. The optimization is carried out under self-weight and polishing pressure loading. A multi-spectral camera for space-use experiences degradation of optical image in the space, which can not be detected on the optical test bench on the earth. An optical surface deformation of a primary mirror, which is a principal component of the camera system, is an important factor affecting the optical performance of the whole camera system. In this study, topology optimization of the primary mirror of the camera is presented. As an objective function, a measure of Strehl ratio is used. Total mass of the primary mirror is given as a constraint to the optimization problem. The sensitivities of the objective function and constraint are calculated by direct differentiation method. Optimization procedure is carried out by an optimality criteria method. For the light-weight primary mirror design, a three dimensional model is treated. As a preliminary example, topology optimization considering a self-weight loading is treated. In the second example, the polishing pressure is also included as a loading in the topology optimization of the mirror. Results of the optimized design topology for the mirror with various mass constraints are presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.920-925
• /
• 2001

A study on the topology optimization of a multi-spectral camera for space-use is presented. A multi-spectral camera for space-use experiences degradation of optical image in the space, which can not be detected on the optical test bench on the earth. An optical surface deformation of a primary mirror, which is a principal component of the camera system, under the self-weight loading is an important factor affecting the optical performance of the whole camera system. In this study, topology optimization of the primary mirror of the camera is presented. Total mass of the primary mirror is given as a constraint to the optimization problem. The sensitivities of the objective function and constraint are calculated by direct differentiation method. Optimization procedure is carried out by an optimality criterion method using the sensitivities of the objective function and the constraint. As a preliminary example, topology optimization considering a self-weight loading is treated. For practical use, the polishing pressure is included as a loading in the topology optimization of the primary mirror. Results of the optimized design topology for the primary mirror with varying mass ratios are presented.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.344-350
• /
• 2017

We present a new design approach and an example design for an image-space telecentric two-mirror system that has a fast f-number and a wide-field line image. The initial design of the telecentric mirror system is a conventional axially symmetric system, consisting of a flat primary mirror with fourth-order aspheric deformation and an oblate ellipsoidal secondary mirror to correct spherical aberration, coma, and field curvature. Even though in the optimized design the primary mirror is tilted, to avoid ray obstruction by the secondary mirror, the image-space telecentric two-mirror system shows quite good imaging performance, for a line imager.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2005년도 한국우주과학회보 제14권2호
• /
• pp.149-152
• /
• 2005

High-resolution telescope from space comprises electro-optical imagery with a ground resolution tying within the range of 1 to 5 meters. According to information documented in the literature up to now, most primary mirrors verified and flown in optical space missions have been lightweighted made from Zerodur, ULE, beryllium, SiC or aluminium. A trade off study was performed to determine as a &lightweighted& by factors like backside cell pattern, rib thickness, face thickness, mirror fixation device location and material and so on based on structural performance for primary mirror in submeter class spaceborne telescope.

• 재활치료과학
• /
• 제2권1호
• /
• pp.24-35
• /
• 2013

본 연구에서는 거울치료가 뇌졸중 환자의 상지 운동기능 향상에 미치는 효과를 문헌고찰을 통해 알아보고 임상적 효용성을 확인하고자 하였다. 또한, 그간 밝혀진 정보를 종합하여 거울치료를 통해 발생하는 중재효과를 분석하고 거울치료의 신경학적 기전을 알아보고자 하였다. 거울치료는 뇌졸중 환자들의 손과 팔의 운동기능을 향상시키고, 일상생활 수행기능회복과 통증경감에 효과가 있다. 하지만 시각 무시에 대해서는 효과를 입증할 수 있는 근거가 아직 분명치 않다. 거울치료는 전운동영역의 신경학적 회복을 유도한다. 전운동영역은 운동 조절의 핵심적인 역할을 하는 부위로서 거울치료에 의해 활성화되면 손상된 일차운동영역의 활성도를 증가시켜 기능회복을 유발한다. 일차운동영역이 완전히 손상된 경우에는 신경 재조직화를 통해 일차운동영역의 기능을 전운동영역이나 보완운동영역이 대체하여 수행한다. 선행연구의 고찰 결과, 거울치료의 효과나 이에 대한 신경학적인 원인에 대한 증거가 아직 부족한 실정이었다. 거울치료의 효과와 신경학적 기전이 명확히 규명된다면 거울치료는 임상에서 보다 효용성 있는 치료로서 구축될 것이라 사료된다.

• Journal of Astronomy and Space Sciences
• /
• 제32권3호
• /
• pp.269-279
• /
• 2015

Future space missions will have larger telescopes in order to look deeper into space while improvising on spatial resolution. The primary mirrors for these telescopes will be so large that using a monolithic mirror will be nearly impossible because of the difficulties associated with its fabrication, transportation, and installation on a launch vehicle. The feasibility of launching these huge mirrors is limited because of their small launch fairing diameter. The aerodynamic shape of the fairing requires a small diameter, but the height of the launch vehicle, which is available for designers to utilize, is larger than the fairing diameter. This paper presents the development of an axial deployment mechanism based on the screw jack principle. The mechanism was designed and developed, and a prototype was constructed in order to demonstrate a lab model.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.109-117
• /
• 1999

In this paper, a direct adaptive control, based on Lyapunov Function Candidate, is applied to a nonlinear Gunner's Primary Stabilized Head Mirror system to derive a parameter adaptation scheme; furthemore, a nonlinear sliding mode control, but also compensating the error in identification of the parameters which are even varying of have uncertain values. The performance of the adaptive controller is determined by the tracking ability to a desired model under some disturbances and the slowly varying parameters of the system. Both adaptive scheme and sliding mode play an important fole in the improvement of the nonlinear system control.

• 한국광학회지
• /
• 제28권4호
• /
• pp.146-152
• /
• 2017

우주용 인공위성 카메라를 구성하는 반사경의 정렬은 광학계의 고분해능, 고성능을 얻기 위한 중요한 과정 중 하나이다. 반사경들의 상호정렬에는 큐브미러(cube mirror)가 대신 사용되기 때문에, 각 반사경과 해당 큐브미러 간의 상호위치관계 정보가 우선 필요하다. 따라서 우주용 카메라 반사경들의 정렬을 위해 각 반사경의 정점과 해당 큐브미러의 상대 좌표값을 정확하게 측정해야하며, 본 논문에서는 컴퓨터 제작 홀로그램(computer-generated hologram, CGH)의 정렬용 세그먼트와 광섬유를 이용하는 새로운 측정 시스템을 제안함으로써 우주용 카메라를 구성하는 반사경의 정점을 요구조건 이내로 측정할 수 있었다. 측정 시스템은 광학계 평가용 간섭계, CGH, 광섬유, 반사경으로 구성되어 있으며, 최종적으로 데오도라이트를 이용해 큐브미러를 기준으로 주 반사경의 정점에 위치한 광섬유 끝단의 3차원 상대 좌표값을 $25{\mu}m$ 이하의 정밀도로 측정할 수 있었다.

• 천문학회보
• /
• 제40권1호
• /
• pp.81.3-81.3
• /
• 2015

Carbon Fiber Re-enforced Polymer (CFRP) has replaced steel, especially for mobile devices. As CFRP is stiff and light-weight, it has been applied to airplane, sport car, golf clubs, semiconductor transporter, satellites, etc. In the telescope, the plastic material was introduced to the supporting tubes or rods connecting the primary mirror assembly and the secondary mirror structure. Nowadays, even the mirror itself is produced by CFRP. In this poster, material properties and production of CFRP telescopes are presented, and pros and cons are discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.535-536
• /
• 2012