• Journal of Embryo Transfer
• /
• v.27 no.3
• /
• pp.189-192
• /
• 2012

Although embryonic stem cells (ESCs) or ES-like cells are reported from many mammalian species other than the mouse, the culture system for murine ESCs may not be suitable to the other species. Previously many other research groups have modified either human or mouse ESC culture systems for bovine ESC culture. In this study, we compared three different culture mediums consisting of DMEM, ${\alpha}$-MEM or KnockOut$^{TM}$-DMEM (KO), which are modified from human or mouse ESC culture system, for the generation of bovine ESCs. In this study, some pre-requisite events which are important for establishment and long-term propagation of ESCs such as inner cell mass (ICM) attachment on feeder cells, primary colony formation and sustainability after passaging. Once the ICM clumps attached on feeder cells, this was designated as passage 0. In regards to the rate of ICM attachment, ${\alpha}$-MEM was superior to the other systems. For primary colony formation, there was no difference between DMEM and ${\alpha}$-MEM whereas KO showed lower formation rate than the other groups. For passaging, the colonies were split into 2~4 pieces and passed every 5~6 days. From passage 1 to passage 3, DMEM system seemed to be appropriate for maintaining putative bovine ESCs. On the other hand, ${\alpha}$-MEM tended to be more suitable after passage 6. Although ${\alpha}$-MEM support to maintain a ES-like cell progenies to passage 15, all three culture systems which are modified from human or mouse ESC culture media failed to retain the propagation and long-term culture of putative bovine ESCs. Our findings imply that more optimized alternative culture system is required for establishing bovine ESC lines.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.67-72
• /
• 2001

In this paper, the plano-convex lens antenna fed by a single patch is studied for a microwave remote-traffic monitoring sensor with constraints of small size and low cost. Measurement of an AUT (Antenna Under Test) involves the considerations of a triangular groove for matched layer and metallic shielding effects. A formulation for extracting the parameters of a piano-convex lens antenna, based on geometrical optics, is introduced using Fermat`s principle of the equi-phased ray condition. Teflon ($\varepsilon_{{\gamma}}$/ =2.0) is chosen as a material of a plano-convex lens antenna for adjustment of aberrations on the lens surfaces automatically. A fabricated plano-convex lens shows 3-dB beamwidth of 7.5 degree and side-lobe level of -29 dB with an aperture distribution of the parabolic-squared taper on pedestal. This lens supports easier integration with the planar microwave circuits by using a microstrip single patch as a primary feeder of the lens antenna.feeder of the lens antenna.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.125-128
• /
• 1990

A program for the protection coordination of distribution systems is reported. The developed program nailed DISCO, consisting of two modules has a capability of selling the overcurrent relays, reclosers, sectionalizers, fuses which are commonly used in the primary feeder systems. Setting is performed in a downstream fashion starting from the substation, and coordination rules are applied identifying the pattern of the primary-backup devices based on the depth-first search. T/C curves of various devices are handled by digitization for accuracy and various graphics and windows are adopted for user-friendly interface.

• The Korean Journal of Ecology
• /
• v.8 no.3
• /
• pp.153-161
• /
• 1985

Energy flow through the trophic levels was studied at a salt marsh ecosystem distinguished into low and high marsh. Gross primary productions of Suaedeto-Salicornietum and Artemisieto-Limonietum at low marsh were 8, 299 and 13, 154kca/$m^2$/yr, and those of Calama-grostetum and Sonchuso-Setaetum at high marsh were 17, 899 and 15, 177kca/$m^2$/yr, respectively. Efficiencies of solar energy utilization of plants were 1.7 and 2.6% at the former, and were 3.6 and 3.2% at the latter. Of gross productions, net primary productions were 3, 977 and 5, 280kca/m2/yr at low marsh and were 6, 354 and 5, 329kca/$m^2$/yr at high marsh, and the remainder, 52~67%, was consumed by respiration of plants. A small amount (0.03~0.04%) of the net primary production was flowed through grazing food chain and most amout was transferred into dead parts. Of dead parts, 40% was accuulated as litter and the rest was decomposed into detritus. In the detritus food chain, a little energy was utilized by detritus feeder, and a major by microorganism. The amounts of energy flowed through grazing and detritus feeders at high marsh were much more than those at low marsh, but tertary production as spider was Vice versa.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.9-20
• /
• 2018

When a large-scale photovoltaic (PV) system is introduced into a distribution system, the customer's voltage may exceed the allowable limit ($220V{\pm}6%$) due to voltage variations and reverse power flow in the PV system. In order to solve this problem, we propose a method for adjusting the customer voltage using the existing step voltage regulator (SVR) installed in the primary feeder. However, due to the characteristics of a mechanically operating SVR, the customer voltage during the tap changing time of the SVR is likely to deviate from the allowable limit. In this paper, an energy storage system (ESS) with optimal operation strategies, and an appropriate capacity calculation algorithm are proposed, and the parallel driving scheme between the SVR and the ESS is also proposed to solve the customer voltage problem that may occur during the tap changing time of the SVR. The simulation results show that the allowable limit of the customer voltage is verified by the proposed methods during the tap changing time of the SVR when the large-scale PV system is connected to the distribution system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.98-104
• /
• 2004

This paper represents the fast and efficient load transfer guide for fault or outage restoration in distribution system. For restoration guide, system trace is performed to reverse direction(source side) from tie breaker in tree-structured distribution network. Search space and breaker's combinational number for restoration guide are greatly reduced. It is proposed the load transfer method including first stage restoration(single load transfer, double load transfer, triple load transfer), second stage restoration(transferring load to neighboring feeder in order to expand the capacity margin) and load cutoff guide. The proposed method can be easily applied to primary customer restoration, multi-fault recovery and distribution automation system.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.302-305
• /
• 2003

It is difficult to obtain sufficient healthy skin for coverage of a wide area of skin wound. In the skin, an additional population of living epithelial cells is located in the outer root sheath (ORS) of hair $follicles.^{1),2)}$ ORS cells should be a good source of epithelium because they are easily obtainable and patients do not have to suffer from scar formation at donor sites. We modified ordinary primary culture technique for the purpose of solving such problem that epithelial cells have a low propagation and easy aging during culture periods. First of all, we improved primary cultivation methods. In the ordinary primary culture, average yield of human ORS cells was $2\;{\times}\;10^3$ cells/follicle by direct incubation with trypsin (0.1%)/EDTA (0.02%) solution for 15 min at $37^{\circ}C$ but we could obtain about $6.5\;{\times}\;10^3$ cells/follicle by two step enzyme digestion method with dispase (1.2 U/ml) and trypsin (0.1%)/EDTA (0.02%) solution. So we could achieve three times higher primary cultured ORS cell yield. Secondly, we could obtain total $2\;{\times}\;10^7$ cells in serum free medium and even more total $6\;{\times}\;10^7$ cells in modified E-medium with mitomycin C-treated feeder cells during 17 days. Using the cultured ORS cells, and we could make bioartificial skin equivalent in vitro and concluded that ORS cells were progenitor cells for skin epithelial cell.

• Reproductive and Developmental Biology
• /
• v.33 no.3
• /
• pp.133-137
• /
• 2009

Pluripotent embryonic stem (ES) cells isolated from inner cell mass (ICM) of blastocyst-stage embryos are capable of differentiating into various cell lineages and demonstrate germ-line transmission in experimentally produced chimeras. These cells have a great potential as tools for transgenic animal production, screening of newly-developed drugs, and cell therapy. Miniature pigs, selectively bred pigs for small size, offer several advantages over large breed pigs in biomedical research including human disease model and xenotransplantation. In the present study, factors affecting primary culture of somatic cell nuclear transfer blastocysts from miniature pigs for isolation of ES cells were investigated. Formation of primary colonies occurred only on STO cells in human ES medium. In contrast, no ICM outgrowth was observed on mouse embryonic fibroblasts (MEF) in porcine ES medium. Plating intact blastocysts and isolated ICM resulted in comparable attachment on feeder layer and primary colony formation. After subculture of ES-like colonies, two putative ES cell lines were isolated. Colonies of putative ES cells morphologically resembled murine ES cells. These cells were maintained in culture up to three passages, but lost by spontaneous differentiation. The present study demonstrates factors involved in the early stage of nuclear transfer ES cell isolation in miniature pigs. However, long-term maintenance and characterization of nuclear transfer ES cells in miniature pigs are remained to be done in further studies.

• Clinical and Experimental Reproductive Medicine
• /
• v.33 no.4
• /
• pp.265-272
• /
• 2006

Objective: This study was carried out to evaluate the effect of the isolation methods of inner cell mass from mouse blastocyst, types of feeder cells and treatment time of mitomycin C on the formation rate of ICM colony. Methods: The inner cells were isolated by conventional immunosurgery, partial trophoblast dissection with syringe needles and whole blastocyst co-culture method. Commercially available STO and primary cultured mouse embryonic fibroblast (pMEF) feeder cells were used, and mitomycin C was treated for 1, 2 or 3 hours, respectively. The formation rate of ICM colony was observed after isolation of ICM and culture of ICM on the feeder cells for 7 days. Result: The ICM colony formation rate on STO were significantly higher in partial trophoblast dissection group (58%) than that in immunosurgery (12%) or whole blastocyst culture (16%) group (p<0.05). The formation rate on pMEF feeder layer was higher in partial trophoblast dissection (88%) and whole blastocyst culture (82%) group than that in immunosurgery (16%) group (p<0.05). When mitomycin C treated to pMEF for 2 hours, the formation rate of 88% was significantly higher than those of other conditions. Conclusion: Above results showed that the efficient isolation method of ICM from blastocyst was the partial trophoblast dissection and the appropriate treatment time of mitomycin C was 2 hours. However, the subculture of ICM colony and characterization of stem cells should be carried out to confirm the efficacy of the partial trophoblast dissection method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.4
• /
• pp.92-104
• /
• 2002

This study investigates, analyzes, and summarizes Dansplantation techniques and methods through practical methodology centering on fieldwork in order to present effective planting methods for large trees that have important significance. The conclusions are as follows : 1. The transplantation process of a large tree generally consists of the stages of digging up a tree, manufacturing a carrier frame, loading the tee on a vehicle, transporting, transplanting the tree, installing a strut and maintaining and managing the new transplant. In addition, planting a tree on a mounted place includes the primary procedures of trimming out the root, and preparing for transplanting the tree on a mounted place, as well as the secondary work of trimming out the root, transplanting a tree on a mounted place, maintenance and management. 2. In order to decide on a transplantation method for a large-sized tree, a structure calculation has to be performed first. That is, one must calculate the weight of the tree and the allowable stress of the strut (H-beam, etc.) fhst and then decide on the upper method through computer modeling based upon this structural calculation. 3. As a result of the analysis of a transplanted tree using the life soil method, it was confirmed that large quantities of feeder roots had developed around the root within a short time after the transplantation. The life soil method has proven to be very effective for transplantation of large-sized trees. 4. As for the production method of an H-beam strut frame, it was found that the manufacturing process and disassembly process were simple and proper; therefore, the H-beam frame is an appropriate structure to be used in the transplantation of large trees. 5. The concavo-convex method, which consists of filling the life soil in the concavo-convex area around the root, was found to be a method that promotes the growth of feeder roots within a short period of time and saves the supply of water at the same time.