• 대한교통학회지
• /
• 제12권1호
• /
• pp.43-54
• /
• 1994

The major concern of this paper is to investigate the properties of a stochastic equilibrium for each model system in terms of a consumer welfare measure. The primary assumption for this study is that a trip-maker would choose the trip from his origin zone which maximizes his personal welfare. This assumption, finally, leads to a singly constrained gravity model. The consumer welfare measure is derived from the concept of expected welfare of randomly sampled trip-makers. Each of the four different models considered in this paper is differentiated depending on the complexity of its model or the definition of its travel function. In this study, three different regions are chosen for the purpose of taking into account the effects of different zone-systems on the properties of a stochastic equilibrium : (i) Archerville region (5 zone) ; (ii) San Francisco Bay regions (30 zones) ; (iii) Houston, TX region (199 zones). It is concluded that almost identical, "global" consumer welfare values can be obtained in some cases of the gravity-type trip distribution models based on a stochastic equilibrium.

• 대한두개안면성형외과학회지
• /
• 제21권4호
• /
• pp.249-252
• /
• 2020

A marginal zone B-cell lymphoma is a type of B-cell lymphoma which is normally located at the margins of the secondary lymph node follicles. According to 2008 World Health Organization (WHO) classification, there are three main types classified according to the location of invasion: nodal lymphoma in the lymph nodes, splenic lymphoma in the spleen, and extranodal lymphoma in other locations. Recently, we have experienced a rare case of primary nodal marginal zone lymphoma that arose in the lower eyelid. Therefore, we report this case with a review of literature.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1789-1798
• /
• 1994

This paper aimed for numerical simulation of complicated gas turbine combustor with swirler. For the convenience of numerical analysis, fuel nozzle and air linear hole areas of secondary and dilution zone, which are issued to jet stream, were simplified to equivalent areas of annular type. In other to solve these problems, imaginary source terms which are corresponded to supplied fuel amount were added to those of governing equation. Chemical equilibrium model of infinite reaction rate and $k-{\epsilon}-g$ model with the consideration of density fluctuation were applied. As the result, swirl intensity contributed to mixing of supplied fuel and air, and to speed up the flame velocity than no swirl condition. Temperature profiles were higher than experimental results at the upstream and lower at the downstream, but total energy balance was accomplished. As these properties showed the similar trend qualitatively, simplified simulation method was worth to apply to complicated combustor for predicting combustion characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.565-570
• /
• 2000

In order to make a quiet zone, one can consider methods to generate a secondary sound field that cancels a primary sound field. Active noise control (ANC) is one of the kinds. This paper mainly deals with the issues on determining the optimal positions of control sources and sensors for making a desired quiet zone. The issues address the reason why the positions are important, how the positions are optimized, and what the measure on the optimal positions is in an uncertain sound field. It is also shown that a power control is applicable to a specific uncertain sound field. In addition, this paper shows that a control material method, which passively changes a boundary condition, is essentially found to be on the same road of ANC.

• 한국주조공학회지
• /
• 제15권6호
• /
• pp.566-573
• /
• 1995

In this study, the microstructural characteristics such as primary silicon, eutectic silicon, $SiC_p$ dispersion behavior, compound amount and Si solubility in $Al/SiC_p$ composite fabricated by the squeeze casting under various conditions were investigated systematically. As applied pressure(MPa) increases, cooling rate and compound amount are increased. In gravity casting, the cooling rate of hypereutectic composite is slower than of hypoeutectic composite by exothermic reaction of primary Si crystallization. But the cooling rate of hypereutectic composite is faster than that of hypoeutectic composite fabricated by same applied pressure, because amount of primary Si crystallization in hypereutectic composite was decreased, on the contrary, primary ${\alpha}-Al$ in hypoeutetic composite was increased due to increase of Si solubility in matrix by applied pressure. The crystalized primary silicon in hypereutectic composite fabricated by squeeze casting become more fine than that in non-pressure casting This is because mush zone became narrow due to increase of Si content of eutectic composition by pressure and time for growth of primary silicon got shorter according to applied pressure. It is turned out that eutectic temperature and liquidus are decreased by the increasing of squeeze pressure in all the composite due to thermal unstability of matrix owing to increasing of Si solubility in matrix by the increasing of applied pressure, as indicated in thermal anaiysis(DSC) results.

• 물과 미래
• /
• 제27권3호
• /
• pp.115-121
• /
• 1994

하구수리계에 있어서 점착성류사의 운동은 응결과 응집(aggregation) 현상에 의해 크게 좌우되며, 이들 현상에 의하여 의결된 입자들의 크기, 모양, 강도는 그 퇴적율과 그리고 부유류사와 오염물질의 변동과정에 영향을 미친다. 본 연구에서는 Brownian 운동에 의해 지배되는 이동성 부유영역과 중력에 의해 지배되는 정체성 부유영역으로 분리하여 점착성입자들의 응집과 응결과정을 모의하였다. 이동성 부유영역에 있어서는 Smoluchowski 모형중 입자들의 무작위 회전을 이용한 최대연쇄 모형으로 응집물질의 사영들을 도출하였으며, 그 회전반경에 의해 사영들의 쪽거리 차원을 구하였다. 저에성 부유영역에서의 응집물질(Brownian 영역을 벗어나 침강하는 응집물질)는 비구형 입자들의 침강으로 간주되어진다. 최종 침강속도 차이로 이들 응집물들은 재차 충돌, 결합하여 보다 큰 응집 입자들을 형성하며, 이들 최종 응집입자들의 사영이 모의되어진다. 최대 Feret's 직경과 Minkowski's sausage logic 개념들을 이용하여 모의되어진 사영들의 둘레 길이에 대하여 쪽거리 차원들을 구하였다.

• 한국학교보건학회지
• /
• 제17권2호
• /
• pp.115-126
• /
• 2004

Purpose: The aim of the study is to provide information about selecting school sites for new schools in congested urban areas and to propose a method to manage harmful environments around primary and secondary schools. Method: Four schools were selected around Gilum New Town and Ilsan City. The problems were identified by counting the businesses classified as harmful and prohibited in a school zone through surveying, collecting reports from relevant sources, and asking questions of authorities in school districts. Results: It was found that many harmful businesses prohibited by the Law of School Health were present in the safe zone of schools in both Ilsan city and Gilum New Town. The school site of Bohyun Elementary School was classified as poor because there was a steep ascent at the entrance and the school was surrounded by a dangerous, steep boundary. We suggested that an education and environment assessment system by completed before the school site was selected. Conclusion: There is a urgent need to improve the approval and permission process of harmful businesses as well as regulatory standards of school site selection in the light of the shortage of land.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.247-253
• /
• 2004

As a large scale port development in coastal waters proceeds step by step and populations in the vicinity of port are getting increased, the issue on "how to dispose the treated municipal water and wastewater in harbor" brings peoples′ concern. The submarine outfall system discharges the primary or secondary treated effluent at the coastline or in deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding sea water and becomes very dilute. We intended in this paper to investigate the impact on dilution of effluent and the behavior of flume under the conditions of the seasonal and spatial temperature variations, which have not been noticeable in designing effective marine outfall system. To predict and analyze the behaviour and dilution characteristics of plume not just with the effluent temperature, but also with the seasonal variation of temperature of surround water and tidal changes, CORMIX(Cornell Mixing Zone Expert System)-GI have been applied. The results should be used with caution in evaluation the mixing zone characteristics of discharged water. We hope to help for the effective operation of outfall system, probable outfall design, protection of water quality, and warm water discharges from a power plant, etc.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1173-1178
• /
• 2006

In a primary reactor cooling system(RCS), a dissimilar weld zone exists between cast stainless steel(CF8M) in a pipe and low-alloy steel(SA508 cl.3) in a nozzle. Thermal aging is observed in CF8M as the RCS is exposed for a long period of time to a reactor operating temperature between 290 and $330^{\circ}C$, while no effect is observed in SA508 cl.3. The specimens are prepared by an artificially accelerated aging technique maintained for 300, 1800 and 3600 hrs at $430^{\circ}C$, respectively. The specimens for elastic-plastic fracture toughness tests are according to the process in the thermal notch is created in the heat affected zone(HAZ) of CF8M and deposited zone. From the experiments, the $J_{IC}$ value notched in HAZ of CF8M presented a rapid decrease up to 300 hours at $430^{\circ}C$ and slowly decreased according to the process in the thermal aging time. Also, the $J_{IC}$ value presented a lower value than that of the CF8M base metal. And, the $J_{IC}$ of the deposited zone presented the lowest value of all other cases.

• 보건교육건강증진학회지
• /
• 제32권5호
• /
• pp.83-92
• /
• 2015

Objectives: This study was conducted to determine the status of the awareness of "school environmental sanitation and cleanup zone system" and to identify the level of harmful perception by shops. Methods: The survey was conducted using a self-administered questionnaire method online via the homepage of the education ministry's student health information center. A total of 293 schools (126 primary schools, 62 middle schools, and 45 high schools) was selected by using a stratified probability sampling. Results: Some 32.1% of all subjects knew the law of school environmental sanitation and cleanup zone system. The mean of harmful perception was 3.01 (very harmful: 4, harmful: 3, little harmful: 2, no harmful: 1). Regarding the types of high level of harmful perception of shops, adult good shops (3.53), hostess bar (3.52), karaoke bar (3.47), Cigarette vending machines (3.47), Adult only theater (3.47) and Phone sex room (3.37) were high. Singing room (2.29), dance school (2.45), tourist hotel (2.58), comic room (2.59), mini game console (2.66), hotel (2.77), billiard hall (2.81), PC room (2.83) were relatively low in the level of harmful perception. Conclusions: National government-level management and supervision will be necessary to prevent adolescent access to harmful shops.