• ALGAE
• /
• v.30 no.2
• /
• pp.121-137
• /
• 2015

Studies on carbon flux in the oceans have been highlighted in recent years due to increasing awareness about climate change, but the coastal ecosystem remains one of the unexplored fields in this regard. In this study, the dynamics of carbon flux in a vegetative coastal ecosystem were examined by an evaluation of net and gross ecosystem production (NEP and GEP) and $CO_2$ exchange rates (net ecosystem exchange, NEE). To estimate NEP and GEP, community production and respiration were measured along different habitat types (eelgrass and macroalgal beds, shallow and deep sedimentary, and deep rocky shore) at Gwangyang Bay, Korea from 20 June to 20 July 2007. Vegetative areas showed significantly higher ecosystem production than the other habitat types. Specifically, eelgrass beds had the highest daily GEP ($6.97{\pm}0.02g\;C\;m^{-2}\;d^{-1}$), with a large amount of biomass and high productivity of eelgrass, whereas the outer macroalgal vegetation had the lowest GEP ($0.97{\pm}0.04g\;C\;m^{-2}\;d^{-1}$). In addition, macroalgal vegetation showed the highest daily NEP ($3.31{\pm}0.45g\;C\;m^{-2}\;d^{-1}$) due to its highest P : R ratio (2.33). Furthermore, the eelgrass beds acted as a $CO_2$ sink through the air-seawater interface according to NEE data, with a carbon sink rate of $0.63mg\;C\;m^{-2}\;d^{-1}$. Overall, ecosystem production was found to be extremely high in the vegetated systems (eelgrass and macroalgal beds), which occupy a relatively small area compared to the unvegetated systems according to our conceptual diagram of a carbon-flux box model. These results indicate that the vegetative ecosystems showed significantly high capturing efficiency of inorganic carbon through coastal primary production.

• Korean journal of food and cookery science
• /
• v.24 no.6
• /
• pp.748-756
• /
• 2008

This study was conducted to investigate the antioxidant activity of hot water extracts of wa-song (Orostachys japonicus A. Berger) dried using hot air (HWE) and frozen (FWE). Varying levels (0.1, 0.5 and 1.0 g/100 g) of HWE and FWE were added to soybean oil and lard. Chromaticity, anisidine value, acid value, peroxide value (POV) and thiobarbituric acid (TBA) value in oils were measured periodically during their storage for 28 days at $60^{\circ}C$. The chromaticity of edible oils showed a general increas with prolonged storage as well increasing levels of extracts. The anisidine value was not significantly increased during storage for 14 days, but was significantly increased after storage for 21 days in soybean oil and lard. The anisidine value of HWE on soybean oil was $12.60{\pm}0.92{\sim}13.82{\pm}0.68$ after storage for 28 days its value was lower than that of the control and buthylated hydroxy anisol (BHT). The antioxidant activity of HWE was found to be more effective than that of FWE. The acid value of HWE was significantly increased during storage from 14 to 21 days in soybean oil and from 7 to 14 days in lard. The antioxidant activity of FWE was particulary effective at the primary stage of the reaction system of lard storage. POV was highly increased during the storage periods between 7 and 14 days in soybean oil. The antioxidant activity in all the samples tested did not significantly increase after storage for 14 days, except when 0.1 g/ 100 g of FWE added to lard. TBA values of all the samples were lower than that of control and 0.02% BHT during their storage. The antioxidant activities of wa-song within the reaction system of oils were more effective in soybean oil than in lard.

• Childhood Kidney Diseases
• /
• v.11 no.1
• /
• pp.106-111
• /
• 2007

[ $Henoch-Sch\ddot{o}nlein$ ] Purpura(HSP) is a form of vasculitis that typically affects small arteries in the skin, joints, intestinal tract and kidneys. It usually resolves spontaneously but sometimes can cause serious problems in the kidneys and intestinal tract. A 6-year-old girl with purpura, arthralgia and abdominal pain for 2 weeks was admitted. She also showed gross hematuria, generalized edema and decreased urine output. Blood pressure was in the upper normal range. Initial laboratory findings showed hypoalbuminemia, hyperlipidemia, microhematuria and nephrotic-range proteinuria(27.2 g/day). Initially, she was treated with pulse methylprednisolone, azathioprine, albumin and furosemide. Her renal biopsy revealed diffuse mesangial proliferation with strong IgA deposition. There were no crescents. On the third hospital day, she complained of severe abdominal pain and free peritoneal air was seen on abdominal X-ray. Primary repair of small bowel was performed and two pin-point sized holes were found. One week later, she still showed heavy proteinuria. Therefore, we added an ACE inhibitor and dipyridamole, and changed azathioprine to cyclosporine. One month later, the urine protein/creatinine ratio was decreased to 17.8 from 57, but heavy proteinuria has been still persisted. Here we report a rare case of a patient with HSP who had both severe nephrritc-nephrotic syndrome and small bowel perforation.

• Research in Community and Public Health Nursing
• /
• v.4 no.1
• /
• pp.5-13
• /
• 1993

The objective of this study was to analyze the status of health examination, and the health care management of industries in Seoul. This will provide effective industrial health care services. 46 industries were selected as a sample, and were given self administered questionnaire developed by the academic affairs of community health nursing. The results of this study are as follows: (1) The general characteristics of industries: The greater part of the industries were manu facturing companies, 300-900 workers, in a one shift system. (2) The general characteristics of health man ager: 96% of the companies had industrial nurses and the larger industries had comprehensive health managers. 90% of the industrial nurses were full-time employees and 77% of the industrial physician were part time employees. 80% of the industrial physician were age 50 or older, while 59% of the industrial nurses were 25-29 years of age. (3) Health examination and follow up care: The proportions of the workers who took general health examination was 94%. Of those, 12% took secondary examinations. In secondary examinations, 36% were evaluated at the C-grade, 20% were evaluated at the D-grade. The proportion of the workers who were required to take special examination were 29% and of that, the proportion of the workers who actually took the examination was 88%. 85% of the workers who were recommended for follow up cares were given follow up care while working. The physical agents among the special examination were done the most frequently to detect the examination effects. (4) Health care services: Industrial nurses performed health examination most frequently and health education was done the least. There were significant differences in health care services according to the size of the industries. Companies with 300 workers or less had higher health care services than other groups. The three primary reasons of health care management and examinations of workers are: First, industrial nurses are requires to accumulate professional knowledge and experience through continuos' activities. Second, systematic and concert examination for industrial workers should be performed periodically. Third, it needs developing health education strategies that are important workers for health promotion in industries.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.4
• /
• pp.337-346
• /
• 2014

This study aimed to understand the mode characteristics of a droplet subject to periodic forced vibration and the detachment of a droplet placed on a plate surface. An surface was coated with Teflon to clearly observe the behavior of a droplet. The contact angle between the droplet and surface and the hysteresis were found to be approximately $115^{\circ}C$ and within $25^{\circ}C$, respectively. The coating process was performed in a clean room that had an environment with a low level of contaminants and impurities such as air dust, detergents, and particles. To predict the resonance frequency of a droplet, theoretical and experimental approaches were applied. Two high-speed cameras were configured to acquire side and top views and thus capture different characteristics of a droplet: the mode shape, the detachment, the separated secondary droplet, and the waggling motion. A comparison of the theoretical and experimental results shows no more than 18 discrepancies when predicting the resonance frequency. These differences seem to be caused by contact line friction, nonlinear wall adhesion, and the uncertainty of the experiment. For lower energy inputs, the contact line of the droplet was pinned and the oscillation pattern was axisymmetric. However, the contact line of the droplet was de-pinned as the oscillation became more vigorous with increased energy input. The size of each lobe at the resonance frequency is somewhat larger than that at the neighboring frequency. A droplet in mode 2, one of the primary mode frequencies, exhibits vertical periodic movement as well as detachment and secondary ejection from the main droplet.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.459-467
• /
• 2006

Recently, interest grew on the quality of aggregates following the diminution of primary resources from river as to grow construction demand and the low grade of nature sand like sea sand. Following, need is to diversify the supply sources of fine aggregates which are excessively relying on sea sand and urgency is to find as soon as possible aggregate resources that can substitute sea sand. On the other hand, various fine aggregates are utilized to produce concrete in the domestic construction fields. However, few studies have been systematically investigated on the effects of such fine aggregates on concrete properties. Therefore, this study examined the effects of comparatively widely used fine aggregates in the domestic construction fields on the quality of concrete through the analysis of the effects of such fine aggregates on the physical properties of fresh concrete and strength of hardened concrete. Results revealed that crushed sand degraded the fluidity and air entraining of concrete compared to natural aggregates like sea sand and river sand. Especially, the use of crushed sand exhibiting bad grain shape and grade was larger adverse effect on the physical properties of concrete. The type of fine aggregates appeared to have negligible influence on the strength for W/C of 55%, 45% while crushed sand decreased the strength for W/C of 35% compared to natural aggregates. It analyzed that the combination of crushed sand exhibiting bad grain shape and grade with natural aggregates improved the characteristics of fresh concrete and had negligible influence on the strength.

• International Journal of Automotive Technology
• /
• v.4 no.2
• /
• pp.77-86
• /
• 2003

How to compare the environmental damage caused by vehicles with different foe]s and drive trains\ulcorner This paper describes a methodology to assess the environmental impact of vehicles, using different approaches, and evaluating their benefits and limitations. Rating systems are analysed as tools to compare the environmental impact of vehicles, allowing decision makers to dedicate their financial and non-financial policies and support measures in function of the ecological damage. The paper is based on the "Clean Vehicles" research project, commissioned by the Brussels Capital Region via the BIM-IBGE (Brussels Institute for the Conservation of the Environment) (Van Mierlo et at., 2001). The VriJe Universiteit Brussel (ETEC) and the universite Libre do Bruxelles (CEESE) have jointly carried out the workprogramme. The most important results of this project are illustrated in this paper. First an overview of environmental, economical and technical characteristics of the different alternative fuels and drive trains is given. Afterward the basic principles to identify the environmental impact of cars are described. An outline of the considered emissions and their environmental impact leads to the definition of the calculation method, named Ecoscore. A rather simple and pragmatic approach would be stating that all alternative fuelled vehicles (LPG, CNG, EV, HEV, etc.) can be considered as ′clean′. Another basic approach is considering as ′clean′ all vehicles satisfying a stringent omission regulation like EURO IV or EEV. Such approaches however don′t tell anything about the real environmental damage of the vehicles. In the paper we describe "how should the environmental impact of vehicles be defined\ulcorner", including parameters affecting the emissions of vehicles and their influence on human beings and on the environment and "how could it be defined \ulcorner", taking into account the availability of accurate and reliable data. We take into account different damages (acid rain, photochemical air pollution, global warming. noise, etc.) and their impacts on several receptors like human beings (e.g., cancer, respiratory diseases, etc), ecosystems, or buildings. The presented methodology is based on a kind of Life Cycle Assessment (LCA) in which the contribution of all emissions to a certain damage are considered (e.g. using Exposure-Response damage function). The emissions will include oil extraction, transportation refinery, electricity production, distribution, (Well-to-Wheel approach), as well as the emission due to the production, use and dismantling of the vehicle (Cradle-to-Grave approach). The different damages will be normalized to be able to make a comparison. Hence a reference value (determined by the reference vehicle chosen) will be defined as a target value (the normalized value will thus measure a kind of Distance to Target). The contribution of the different normalized damages to a single value "Ecoscore" will be based on a panel weighting method. Some examples of the calculation of the Ecoscore for different alternative fuels and drive trains will be calculated as an illustration of the methodology.

• Journal of Environmental Impact Assessment
• /
• v.27 no.3
• /
• pp.241-250
• /
• 2018

Recently, negative effects on human health such as disease caused by harmful environment have been dealt with seriously. In particular, studies on the effect of radon exposure, which is known as a primary carcinogen in lung cancer due to radioactive materials, have been actively studied. In Korea, since January 1, 2018, radon measurement is mandatory when building a new apartment, so it is necessary to measure the radon concentration and submit it to the local government and it should be posted where residents can see it. Radon has only recommended standards for multi-use facilities, but now it has decided to set recommendation standards for private homes. Therefore, it should now be possible to manage the radon in the environmental impact assessment phase as well as in the Post-environmental Impact Assessment. It should be possible to share health information such as the radon concentration and the risk of radon, and participation of health experts in the environmental impact assessment stage is required. Soil, air quality, hygiene and aerial items should be improved to take into account the effects of radon on human health during the environmental impact assessment process. If the level value of conncentration of radon shows above the recommended level, then alternative measures should be prepared and mitigation measures should be prepared as well.

• Journal of Environmental Health Sciences
• /
• v.45 no.6
• /
• pp.668-674
• /
• 2019

Objectives: Modern people spend most of their day indoors. As the health impact of radon becomes an issue, public interest also has been growing. The primary route of potential human exposure to radon is inhalation. Long-term exposure to high levels of radon increases the risk of developing lung cancer. Radon exposure is known to be the second-leading cause of lung cancer, following tobacco smoke. This study measures the indoor radon concentrations in detached houses in area A of Chungcheongbuk-do Province considering the construction year, cracks in the houses, the location of installed detectors, and seasonal effects. Methods: The survey was conducted from September 2017 to April 2018 on 1,872 private households located in selected areas in northern Chungcheongbuk-do Province to figure out the year of building construction and the location of detector installed and identify the factors which affect radon concentrations in the air within the building. Radon was measured using a manual alpha track detector (Raduet, Hungary) with a sampling period of longer than 90 days. Results: Indoor radon concentrations in winter within area A was surveyed to be 168.3±193.3 Bq/㎥. There was more than a 2.3 times difference between buildings built before 1979 and those built after 2010. The concentration reached 195.4±221.9 Bq/㎥ for buildings with fractures and 167.2±192.4 Bq/㎥ for buildings without fractures. It was found that detectors installed in household areas with windows exhibited a lower concentration than those installed in concealed spaces. Conclusion: High concentrations of indoor radon were shown when there was a crack in the house. Also, ventilation seems to significantly affect radon concentrations because when the location of the detector in the installed site was near windows compared to an enclosed area, radon concentration variation increased. Therefore, it is considered that radon concentration is lower in summer because natural ventilation occurs more often than in winter.

• Journal of Gastric Cancer
• /
• v.6 no.1
• /
• pp.52-56
• /
• 2006

A 69-year old man presented with severe epigastric pain for 1 day. He had early gastric cancer at the antrum and underwent a distal subtotal gastrectomy and Billorth II gastrojejunostomy one month later without any post-operative complications. Radiologic examination revealed a large amount of retroperitoneal free air formation. Because of unremitting pain and unstable vital sign, exploratory laparotomy was followed. During the operation, a perforated duodenal diverticulum at the posterior wall of the 2nd portion of the duodenum was identified. He underwent diverticulectomy and primary closure. He was discharged on the 18th post operative day and has been followed up without any evidence of comlpication for several months.