• Toxicological Research
• /
• v.9 no.1
• /
• pp.119-123
• /
• 1993

LBD-007, a newly developed recombinant human interferon ${\alpha}$A, was tested for primary eye and skin irritation in male New Zealand White rabbits. In the primary eye irritation test, 0.1ml of a solution of LBD-007 was instilled into the eye. In rinsing group, the eye was washed with water 30 seconds after instillation. No reaction was observed at the cornea, iris and conjunctivae by LBD-007. In the primary skin irritation test, LBD-007 was applied to the back of rabbits for 24 hours. Primary irritation index was "0" in test and control sites of all animals. Thus LBD-007 was evaluated as a non-irritant on the basis of the criteria of Draize et al.,(1994).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.06a
• /
• pp.148-159
• /
• 1997

In this study, microstructure, size of primary $\alpha$, solid fraction and hardness of A356 Al alloy, were investigated. Semi-solid A356 allos were obtained by semi-solid continuous casting apparatus consists of melting furnace, formation apparatus of granular primary $\alpha$ and continuous casting apparatus. Size of promary $\alpha$ and fraction solid were decreased with decreasing temperature, and with increasing volume of cooling water. At the cooling water temperature of 15$^{\circ}C$ and cooling water volume of 18.2$\ell$/min, the sizes of primary $\alpha$ phases were decreased up to 40${\mu}{\textrm}{m}$, and fraction solid was 0.68.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.06a
• /
• pp.183-195
• /
• 1997

The micorstructural characteristics, particularly $\alpha$-halo formation, in semi-solid state processed hypereutectic Al-Si alloy was investigated. The microstructural changes during reheating of wedge type mold cast ingot, hot-rolled sheet, and Si particulate reinforced Al composite was compared with those occurred during stirring of semi-solid state hypereutectic alloy. In the case of semi-solid state reheating of wedge type ingot and hot-rolled sheet, fine particles of Si as well as $\alpha$-halo formed after heat treatment. Although there seemed to be no coarsening with variations of holding time, the region of $\alpha$-halo decreased due to homogenization. Nucleation and recrystallization was accelerated with the addition of alloying elements during hot rolling resulting in primary Si particle size decrease and $\alpha$-halo formation. In the case of extruded specimens, very little morphological change of reinforcing Si particles was observed. Almost no $\alpha$-halo formed during reheating because of the oxide film formed on the reinforcing Si particles which acted as a diffusion barrier between the matrix and the primary Si particles.

• Journal of Korea Foundry Society
• /
• v.18 no.6
• /
• pp.541-549
• /
• 1998

Microstructural characteristics of hypereutectic Al-Si alloys during reheating at semi-solid temperature have been investigated. The size and morphology of primary Si particles in wedge-type mold-cast ingot has been compared with hot-rolled sheet and Si particulate reinforced Al composite. Effects of P and Sr addition on the morphological changes of primary Si particles have been also investigated. Observation of the solidification microstructures of the wedge-type mold-cast ingot at different cooling rates showed that alloying elements such as P and Sr affect the morphology of Si particles, especially in the area solidified at a slow cooling rate. Negligible change in the size of primary crystals was observed after reheating experiment, but ${\alpha}-halo$ formed around the Si particles and fine particles of Si precipitated in the surrounding area of the Si particles. In addition, there seemed to be no coarsening with increasing of holding time and the region of ${\alpha}-halo$ being decreased. Nucleation and recrystallization was accelerated with addition of alloying elements during hot rolling resulting in a decrease of primary Si particle size. In the case of extruded specimens, morphological change of primary Si particles was not observed after reheating. No ${\alpha}-halo$ formation was observed in Si reinforced Al composite because of the oxide film formed on the Si particles which acted as a diffusion barrier between substrate and the primary Si particles.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.198-207
• /
• 1998

To determine the effect of temperature and microstructure on the fatigue crack propagation behavior in Ti-3Al-2.5V alloy, experimental investigations have been carried out with the specimens of different temperatures and different volume fractions of prime $\alpha$-phase. The temperatures employed were room temperature, 20$0^{\circ}C$, 30$0^{\circ}C$ and 40$0^{\circ}C$ under the same frequency of 20Hz. To obtain the different volume fractions of the primary $\alpha$-phase, specimens were solution-treated at $\alpha$+$\beta$ and above the $\beta$ region. From the experimental results, following conclusions were obtained. (1) ΔKth was observed to increase with the less volume fraction of the primary $\alpha$-phase. (2) As the temperature increased. (3) Microstructures having more primary $\alpha$-phase showed higher strength at the high temperatures.

• The Korean Journal of Physiology and Pharmacology
• /
• v.6 no.6
• /
• pp.319-325
• /
• 2002

The induction of interleukin-6 (IL-6) using combined proinflammatory agents $(LPS/IFN-{\gamma}\;or\;TNF-{\alpha}/IFN-{\gamma})$ was studied in relation to p38 mitogen-activated protein kinase (MAPK) and $NF-{\kappa}B$ transcriptional factor in primary neonatal cardiomyocytes. When added to cultures of cardiomyocytes, the combined agents $(LPS/IFN-[\gamma}\;or\;TNF-{\alpha}/IFN-{\gamma})$ had stimulatory effect on the production of IL-6 and the elevation was significantly reduced by SB203580, a specific p38 MAPK inhibitor. SB203580 inhibited protein production and gene expression of IL-6 in a concentration-dependent manner. In this study, $IFN-{\gamma}$ enhancement of $TNF-{\alpha}-induced\;NF-{\kappa}B$ binding affinity as well as p38 MAP kinase activation was observed. However, a specific inhibitor of p38 MAPK, SB203580, had no effect on $TNF-{\alpha}/IFN-{\gamma}\;or\;LPS/IFN-{\gamma}-induced\;NF-{\kappa}B$ activation. This study strongly suggests that these pathways about $TNF-{\alpha}/IFN-{\gamma}$ or $LPS/IFN-{\gamma}-activated$ IL-6 release can be primarily dissociated in primary neonatal cardiomyocytes.

• Korean Journal of Ecology and Environment
• /
• v.40 no.3
• /
• pp.419-430
• /
• 2007

Physiochemical factors, phytoplankton biomass (Chl ${\alpha}$) and primary productivity were investigated seasonally in the three lakes of Dongbok, Juam, and Yeongsan during April 2004${\sim}$March 2006. Microphytoplankton dominated (>60%) in Dongbok lake, and phytoplankton biomass was high in the upper area, especially during April 2004, whereas they were high in the lower area during June 2004. In Juam lake, the high phytoplankton biomass in April 2004 was contributed by nanophytoplankton. In Yeongsan lake, chlorophyll a was high in August with high contribution of nanophytoplankton. Primary production was highest in Dongbok lake, and then followed by Yeongsan and Juam lakes. Regression analysis in Dongbok take showed that Chl ${\alpha}$ and primary production had close relations with secchi depth. In Juam lake, phosphate were correlated with the Chl ${\alpha}$, while temperature and TN was correlated with primary production in the lower area. In Yeongsan lake, Chl ${\alpha}$ have positively correlation with TN/TP. Primary production in the upper have high relationship with secchi depth, however, in the lower have high relationship with turbidity. Linear regression analysis showed that nutrients of nitrogen and phosphorus should be reduced for the protections in Juam and Dongbok lakes. We suggested that suspended solids and phytoplankton growth related to turbidity are needed to manage in Yeongsan lake.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.1
• /
• pp.20-24
• /
• 2015

We studied the relationship between the surface smoothness of the internal Cu ribbon and the morphology of the Sn-Pb plating layer for solar cell modules. A bumpy surface was observed on the surface of the solar ribbon, which caused irregular reflection of light. Large, Pb-rich, primary ${\alpha}$-phases were found below the convex surface of the solar ribbon, passing from the surface of the internal Cu ribbon to the surface of the plating layer. The primary ${\alpha}$-phases heterogeneously nucleated on the convex surface of the Cu ribbon, and then largely grew to the convex surface of the plating layer. The restriction of the primary ${\alpha}$-phase's formation was enabled by enhancing the smoothness of the Cu ribbon's surface; it was also possible to increase the adhesive strength and decrease contact resistance. We confirmed that the solar ribbon's surface smoothness depends on the internal Cu ribbon's surface smoothness.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1293-1296
• /
• 2009

A new series of N-substituted 2-n-butyl-3-fluoropyrroles were prepared by a simple one-pot reaction designed of retrosynthesis. $\alpha,\alpha-Difluoro-\gamma-iodo-\gamma$-(trimethylsilyl)propyl n-butyl ketone, a component precursor molecule to 2-n-butyl-3-fluoropyrroles, was prepared with Cu(0) catalyst. It reacted with various primary amines to yield N-substituted 2-n-butyl-3-fluoropyrroles. The products were synthesized via a one-pot reaction scheme between $\alpha,\alpha-Difluoro-\gamma-iodo-\gamma$-(trimethylsilyl) propyl n-butyl ketone and primary amines in excess ( $\geq$ 5 molar equivalence), which eliminate the need of KF required in obtaining n-butyl-1H-3-fluoropyrrole. The yield of products depended reversely on spatial bulkness around N-binding carbon.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.21-26
• /
• 2008

The in situ incubation experiment was carried out using $^{13}C$ tracer to determine primary productivity and fatty acid production rate in the shallow, eutrophic Shingu reservoir on 4th July. Particulate organic matter (POM) accounted for 76% in suspended particulate matter (SPM), and average concentration of chlorophyll-${\alpha}$ was $89{\mu}g\;L^{-1}$ in the euphotic layer. Total amount of chlorophyll-${\alpha}$ (Chl-${alpha}$), primary productivity and Chl-${alpha}$ specific productivity in euphotic layer were 112 mg Chl-${alpha}m^{-2}$, 3.53 g C $m^{-2}\;d^{-1}$, 32mg C mg Chl-${\alpha}^{-1}\;d^{-1}$, respectively. The fatty acid composition in newly produced organic matter and suspended organic matter didn't show any significant difference, demonstrating that autochthonous organic matter should be a major source of POM pool. In addition, the fatty acids of bacterial origin were increased through extracellular release of newly photosynthesized DOC, and closely coupled with bacterial assimilation. This result suggests that organic carbon should be actively cycled through the microbial loop in Shingu reservoir in summer.