• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.3
• /
• pp.83-90
• /
• 2016

Despite the ability of biochar to enhance soil fertility and to mitigate greenhouse gas, its carbon sequestration and profit analysis with arable land application have been a few evaluated. This study was conducted to estimate carbon sequestration and to evaluate profit of greenhouse gas mitigation during corn cultivation periods. For the experiment, the biochar application rates were consisted of pig compost(non application), 2,600(0.2%), 13,000(1%), and 26,000(2%) kg/ha based on pig compost application. For predicting soil carbon sequestration of biochar application, it was appeared to be linear model of Y = 0.5523X - 742.57 ($r^2=0.939^{**}$). Based on this equation, soil carbon sequestration by 0.2, 1 and 2% biochar application was estimated to be 1,235, 3,978, and 14,794 kg/ha, and their mitigations of $CO_2$-eq. emissions were estimated to be 4.5, 14.6, and 54.2 ton/ha, respectively. Their profits were estimated at $14.6 for lowest and $452 for highest. In Korea Climate Exchange, it was estimated that the market price of $CO_2$ in corn cultivation periods with 0.2, 1 and 2% biochar application was $35.6, $115.3 and $428.2 per hectare, respectively. For the plant growth response, it was observed that plant height and fresh ear yield were not significantly different among the treatments. Therefore, these experimental results might be fundamental data for assuming a carbon trading mechanism exists for biochar soil application in agricultural practices.

• Research in Plant Disease
• /
• v.20 no.3
• /
• pp.227-233
• /
• 2014

The mixture (MX) of acetic acid (AA) and lactic acid (LA) was examined for its effectiveness in the control of the pine wood nematode Bursaphelenchus xylophilus contaminated in cymbidium culture medium. Nematode mortality in vitro was nearly 100% in AA and MX at the concentrations of 5.0-1.0% (pH 2.6 - 4.2) and in LA only at 5.0% (pH 3.5), but lowered at concentrations of 0.5-0.1% (pH 5.1-6.9) more significantly in LA than AA and MX. MX of most concentrations caused higher nematode mortality than the average response to AA and LA. All treatments of MX (0.5% and 0.25%), fosthiazate (standard and double concentrations) and culture dilution of Paenibacillus polymyxa GBR-1 ($10^7$colony-forming units/ml) reduced significantly the nematode populations in the cymbidium culture medium, compared to non-treatment control, with no significant difference among the treatments. No phytotoxicity occurred in all treatments. pH of the medium with the time after treatment and growths of 2-year-old cymbidium were not significantly different among treatments. Considering the safety and price of the organic acids, use of MX in the processes for culturing cymbidium may be a practically reliable and eco-friendly way in the control of the quarantine nematode in cymbidium.

• Journal of Technology Innovation
• /
• v.22 no.3
• /
• pp.101-133
• /
• 2014

Climate change and low-carbon consumer movement is demanding proper response around the world while rising oil price increases consumers' needs for green car. As a preliminary study to establish an industrial platform for green car and bring out corporate strategies, this article aims to propose an academic research framework by using various methodologies including conceptual/mathematical modeling, system dynamics, and ABM from different angles. First, an analysis framework for the industrial platform was introduced to analyze green car cases, required elements were proposed, and econometrics was applied to build a basic model related to green platform (two-sided market). Also, to analyze from a dynamic perspective, a system dynamics model was applied to green car environment to build a system dynamics analysis model that is applicable to particular green car industry analysis. Lastly, an agent based model was used to study the way to activate the hybrid car market in Korea from individual consumers' perspective. Based on the result, vehicle policies that are either being enforced or planned to be enforced in the Korean HEV market can be analyzed.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.480-488
• /
• 2016

As the subprime mortgage crisis spread globally, it depressed not only the financial market, but also the construction business in Korea. In fact, according to CERIK, the BSI of the construction businesses plunged from 80 points in December 2006 to 14.6 points in November 2008, and the extent of the depression in the housing sector was particularly serious. In this respect, this paper analyzes the influence of the financial market fluctuation on the housing market before and after the Global Financial Crisis using VECM. The periods from January 2000 to December 2007 and January 2008 to October 2015, before and after the financial crisis, were set as Models 1 and 2, respectively. The results are as follows. First, when the economy is good, the Gangnam housing market is an attractive one for investment. However, when it is depressed, the Gangnam housing market changes in response to the macroeconomic fluctuations. Second, the Gangbuk and Gangnam housing markets showed different responses to fluctuations in the financial market. Third, when the economy is bad, the effect of low interest rates is limited, due to the housing market risk.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1231-1239
• /
• 2007

The purpose of this study was to investigate consumer's behaviors on the laundering of baby's clothing according to washing machine types. The subjects were 255 consumers with babies(0-2 years) in Korea. The data were collected with a self-administered questionnaire and analyzed by Chi-square test and multiple response analysis, and SPSS 12.0 statistics package was used. Consumers were separated into two groups according to washing machine types with general pulsator type and drum-type. Consumer's behaviors between general pulsator type group and drum-type group of washing machines were also examined. The results of this study were as follows. In the consumer satisfaction for washing machine, mostly drum-type group of consumers were satisfied with their washing machines. As the reasons of washing machine's dissatisfaction, noise, washing time and low washing efficiency were high in the pulsator type group, and washing time, noise and high price in the drum-type washing machine group. The consumers concerned about separation of clothing and laundering label while they washed laundry by washing machine. However, they didn't separate clothing because the small volume of laundry and a long washing time. The most interest and required thing of consumers was complete rinsing without any detergents used in washing as well as the removal of soils for baby's clothing regardless of two washing machine types. And they complained food soils like milk and mother's milk etc. were not completely removed by washing machine. As a whole the washing frequency of baby's laundry was once per a day and the rinsing also more than three times per a laundry. Most of the consumers used a private detergents for baby's clothing(detergents for baby's clothing only), and preferred to the high or boiled temperature washing as a desirable baby's laundering. There were significant differences between general pulsator type group and drum-type group of washing machines on the laundering of baby's clothing in this study.

• Journal of Service Research and Studies
• /
• v.7 no.4
• /
• pp.15-38
• /
• 2017

The purpose of this study is to look into the consumers who show the consumption patterns of brand switching and repeated purchasing, find the decision factors of their brand switching and repeated purchasing, analyze the difference in marketing response variables being represented as corporate promotion activities in the brand switching and repeated purchasing process, and provide a suggestion to apply the result to marketing Therefore, it tries to help the firms, which develop push marketing as the result of excessive competition between distributors and sales competition focusing on external appearance, recognize consumers as individual substances; to propose proper efficient promotion activities; to let consumers increase loyalty to their trademark and continue to purchase their products repeatedly; and to induce competitor brand consumers to do brand switching. The results of this study are presented as follows: First, consumers who prefer events, price discount, samples, and product premium which means the products with brand or logo on them had the feature of repeated purchasing. Secondly, service benefit, point-type promotion, cost-saving satisfaction didn't affect brand switching, and only the consumers who prefer coupon-type promotion did brand switching. Thirdly, a distribution type produced the moderating effect between the repeated purchasing and coupon and coupon-type promotion, and between brand switching and service benefit.

• Korean Journal of Veterinary Research
• /
• v.1 no.1
• /
• pp.1-29
• /
• 1961

A routine hematological observation in the course of starvation was carried out on eight experimentel1y starved rabbits. They were strictly selected and restricted all of food intake with the exception of optional water intake until death. The body weight of each rabbit on the day before starvation was about 2 kilograms. The results are summarized as follows. 1. The average decrememt ratio of body weight on the terminal day before death was $34.3{\pm}7.5$ per cent with the range from 24.5 to 46.3 per cent. The average life duration until death was $10.25{\pm}2.6$ days, the range being from 6 to 14 days. 2. The decrease in number of reticulocytes with a parallel disappearance of polychromatic erythrocytes in peripheral blood in the course of starvation Was the most remarkable change in erythrocytic series, an evidence suggesting marked restriction of the erythropoietic function on 3rd to 4th day and almost complete suspension in about a week of starvation. 3. Erythrocyte count, hemoglobin content and haematocrit value of peripheral blood, were normal or indicative of slight hemoconcentration. 4. Mean Corpuscular Hemogloin Concentration was slightly higher than normal and Mean Corpuscular Volume tended to be low and no appreciable shifts were observed in Mean Corpuscular Diameter and Price-Jones curve of erythrocytes, while fewer macrocytes than normal were seen. These changes were considered to have resulted from a marked decrease in young erythrocytes in peripheral blood in the course of starvation. 5. Neither poikilccytoses or anisosytosis was observed. 6. Leukopenia was observed in all of 8 starved rabbits. The decrement ratio on the terminal day of starvation was between 13 to 64 per cent. The leukopenia was mainly due to fall of lymphocytes in 6 cases and to fall of neutrophilic leukocytes in the other 2 cases. In many cases, irregular fluctuation of neutrophilic leukocytes in its biological curve were seen in contrast to the relatively smooth changes of lymphocytes. Eosinophilic leukocytes tended to decrease in absolute number especially in later stage of starvation. Little significance in regard to monocytes and basophilic leukocytes in this study was discussed. 7. Proplasma cells, rarely plasma cells, appeared with a tendency to increase in number at later stage of starvation. 8. The most characteristic changes on circulating blood cells in complete starvation of rabbits were the leukoponia and failure of regeneration of erythroctes. These changes were considered as adaptive phenomena in response to the catabolic consumption of body constituents.

• Survey Research
• /
• v.4 no.2
• /
• pp.63-86
• /
• 2003

The objective of this study was to investigate the existence of starting point bias in the bidding game contingent valuation elicitation technique when determining willingness to pay (WTP) for improving the qualify of running water in Seoul and its vicinity. Of all existing contingent techniques, the bidding game most closely mimics the normal price taking behavior in local markets. Three different starting points (low, medium and high) were used to determine WTP and the existence of starting point bias in the meanwhile respectively. The respondents were randomly assigned to the three different starting point groups in order to ensure homogeneity, so that any variation seen in WTP could be attributed to the starting point effects. And a pretested interviewer-administered questionnaire used to elicit WTP. Non-parametric test and the logit model were used to analyze the data for evidence of starting point bias. In this instance, the high starting point group had a high WTP, and low starting point group had a low WTP. This means there exist starting point bias in estimating WTP by bidding game in this instance. This finding might signal that people may actually be making up their minds on the maximum amount they are willing to pay for running water service as a bidding iterating is going on and is influenced by the starting point used in the bidding game. The problem of slaking point bias can be avoided if the respondent is asked directly for the maximum WTP without payment cards or a bidding game. But such a question is perceived as being very difficult to answer and this leads to problems of non-response and being unrealistic.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.6
• /
• pp.67-74
• /
• 2004

Differently from an existing analog control, because the digital control includes microprocessor basically, the digital control is enable to monitor internal parameters of DC-DC converter and to control output voltage remotely by communicating with a Windows based PC. These things are impossible in an analog control and there are more advantages in a digital control than an analog control. In this paper, with the advantages mentioned above, the feasibility of digital controlled DC-DC converter in low price is proposed. In order to implement these functions, it is used the inexpensive H8/3672 made by Renesas that has built in AD converters and PWM logic generators. The proposed digital controller is applied to a flyback converter that is designed to output DC 5[V] from DC 20∼30[V] and is remotely controlled to make variable outputs from DC 0[V] to 5[V] above in PC. The PWM controller adopts the PD controller in PID. In the last, the response characteristics of a step reference voltage and in a steady state are experimented to verify the feasibility and the usefulness of the proposed flyback converter that is implemented inexpensively.